| Additive ST 2 | Ichemco | Additive ST 2 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an additive in Color Ink PP PAMC and Color Ink PP PAM+Add applications to improve protection of the printed area in case of ink transfer. | |
| Additive ST 2X | Ichemco | Additive ST 2X is a polycondensed urethane solution in xylene. This product has a total solids content of 11.5-12.5%. Additive ST 2X is most commonly used as an ink additive added before printing onto PP acrylic and solventborne PSA tapes. | |
| Additive ST2/14 | Ichemco | Additive ST2/14 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Additive ST2/14 ECO | Ichemco | Additive ST2/14 ECO is a polycondensed urethane solution in aliphatic solvents. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Additivo NS | Ichemco | Additivo NS is a titanium chelate in a solvent solution. This product is most commonly used to improve thermal resistance in Color Ink NS coated polyethylene film applications. | |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antiox 2246 | Ichemco | Antiox 2246 is a phenolic antioxidant. This product has a melting range of greater than 125°C. Antiox 2246 is most commonly used as an antioxidant in solvent-based adhesive applications. | |
| Antiox AHM | Ichemco | Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and c...Vea Mas Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox AHM EC | Ichemco | Antiox AHM EC is a blend of two primary phenolic, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a melting range of 60-100°C. Antiox AHM EC is most commonly used as an antioxidant in pressure sensitive ad...Vea Mas Antiox AHM EC is a blend of two primary phenolic, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a melting range of 60-100°C. Antiox AHM EC is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox AHM FF2 D | Ichemco | Antiox AHM FF2 D is a blend of non-staining antioxidants. This product has a total solids content of 98-100% and a melting range of 100-120°C. Antiox AHM FF2 D is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications...Vea Mas Antiox AHM FF2 D is a blend of non-staining antioxidants. This product has a total solids content of 98-100% and a melting range of 100-120°C. Antiox AHM FF2 D is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox AHM Pellets | Ichemco | Antiox AHM Pellets are a blend of three primary phenolic stabilizers, a thio-ester, and a phosphite in a pellet form. This product has a total solids content of 98-100%. Antiox AHM Pellets are most commonly used as an antioxidant in pressure sensitive adh...Vea Mas Antiox AHM Pellets are a blend of three primary phenolic stabilizers, a thio-ester, and a phosphite in a pellet form. This product has a total solids content of 98-100%. Antiox AHM Pellets are most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox AHM Pellets B | Ichemco | Antiox AHM Pellets B is a blend of three primary phenolic stabilizers, a thio-ester, and a phosphite in a pellet form. This product has a total solids content of 98-100%. Antiox AHM Pellets B is most commonly used as an antioxidant in pressure sensitive a...Vea Mas Antiox AHM Pellets B is a blend of three primary phenolic stabilizers, a thio-ester, and a phosphite in a pellet form. This product has a total solids content of 98-100%. Antiox AHM Pellets B is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox AHM-EC Pellets | Ichemco | Antiox AHM-EC Pellets are a blend of four non-staining antioxidants. This product has a total solids content of 98-100%. Antiox AHM-EC Pellets are most commonly used as a UV protector in pressure sensitive adhesive and coating applications. | |
| Antiox AHM-EC2 Pellets | Ichemco | Antiox AHM-EC2 Pellets are a blend of two primary phenolic stabilizers, a thio-ester, and a phosphite in a pellet form. This product has a total solids content of 98-100%. Antiox AHM-EC2 Pellets are most commonly used as an antioxidant in pressure sensiti...Vea Mas Antiox AHM-EC2 Pellets are a blend of two primary phenolic stabilizers, a thio-ester, and a phosphite in a pellet form. This product has a total solids content of 98-100%. Antiox AHM-EC2 Pellets are most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox ASX | Ichemco | Antiox ASX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a melting range of 105-120°C. Antiox ASX is most commonly used as an antioxidant in pressure sensitive adhesi...Vea Mas Antiox ASX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a melting range of 105-120°C. Antiox ASX is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox ASX 3-DF | Ichemco | Antiox ASX 3-DF is a dust-free blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a melting range of 50-70°C. Antiox ASX 3-DF is most commonly used as an antioxidant in pressur...Vea Mas Antiox ASX 3-DF is a dust-free blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a melting range of 50-70°C. Antiox ASX 3-DF is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox LX | Ichemco | Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural r...Vea Mas Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural rubber, SBR, and resin adhesive applications. Vea Menos | |
| Antiox UV-ST | Ichemco | Antiox UV-ST is a blend of Antiox AHM/FF and Tinuvin P (50:50) which are (primary phenolic stabilizers-phosphite -thioester). This product has a total solids content of 98-100% and a melting range of 85-130°C. Antiox UV-ST is most commonly used as a UV st...Vea Mas Antiox UV-ST is a blend of Antiox AHM/FF and Tinuvin P (50:50) which are (primary phenolic stabilizers-phosphite -thioester). This product has a total solids content of 98-100% and a melting range of 85-130°C. Antiox UV-ST is most commonly used as a UV stabilizer in coating adhesive applications. Vea Menos | |
| Antischiuma FL5 | Ichemco | Antischiuma FL5 is a VOC-free, organic defoamer. This product has a Brookfield viscosity at 25°C of 200-500 mPa.s. Antischiuma FL5 is most commonly used as a defoaming agent in water-based adhesive production applications. | |
| Blendex 31 | Ichemco | Blendex 31 is a solvent-based, heat sealable adhesive. This product has a total solids content of 21-23% and a Brookfield viscosity at 25°C of 400-1000 cPs. Blendex 31 is most commonly used to bond rubber compounds to metal and polymeric substrates. | |
| Blendex 55 F | Ichemco | Blendex 55 F is a solvent-free, one-component moisture curing polyurethane adhesive. This product has a viscosity at 100°C of 750-1000 mPa.s. Blendex 55 F is most commonly used in fabric and film lamination applications. | |
| Blendex 70 A | Ichemco | Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most common...Vea Mas Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most commonly used as a solvent adhesive in coating system applications. Vea Menos | |
| Blendex 75 A | Ichemco | Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most comm...Vea Mas Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most commonly used as a solvent adhesive in coating system applications. Vea Menos | |
| Blendex 81 T | Ichemco | Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in f...Vea Mas Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in film and fabric lamination applications. Vea Menos | |
| Blendex B1 | Ichemco | Blendex B1 is a liquid blend of synthetic polymers and natural resins. This product has a viscosity at 3500-8000 cPa. Blendex B1 is most commonly used in solvent adhesive production applications. | |
| Blendex PVC 10 | Ichemco | Blendex PVC 10 is a heat-sealable, transparent, solvent-based printing lacquer. This product is most commonly used to improve scrubbing and water resistance in paper, PVC, and PET coating applications. | |
| Blendex S 24/20 | Ichemco | Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonl...Vea Mas Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex S 24/25 A | Ichemco | Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly us...Vea Mas Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex S 24/25 MA | Ichemco | Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamina...Vea Mas Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex S 79 | Ichemco | Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applic...Vea Mas Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applications. Vea Menos | |
| Blendex S 79 T | Ichemco | Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transf...Vea Mas Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transfer coating applications. Vea Menos | |
| Blendex S12 20 | Ichemco | Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly...Vea Mas Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex Seal 81 DH | Ichemco | Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, fo...Vea Mas Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal 81 DH (V1) | Ichemco | Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 D...Vea Mas Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 DH (V1) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal 81 DH (V2) | Ichemco | Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesi...Vea Mas Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal 81 DH (V3) | Ichemco | Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesi...Vea Mas Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal C6 | Ichemco | Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, f...Vea Mas Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal C6 (V3) | Ichemco | Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,00...Vea Mas Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal C6 (V3) is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 14 | Ichemco | Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile ap...Vea Mas Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile applications. Vea Menos | |
| Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...Vea Mas Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...Vea Mas Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat s...Vea Mas Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat ...Vea Mas Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 M (V2) | Ichemco | Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in f...Vea Mas Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 M (V3) | Ichemco | Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in f...Vea Mas Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex WUM | Ichemco | Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboa...Vea Mas Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboard applications. Vea Menos | |
| Color Lac N65 | Ichemco | Color Lac N65 is a transparent ink in an ethyl acetate/IPA solvent solution. This product is most commonly used in security tape production applications. | |
| Color Paste S Avana 893 | Ichemco | Color Paste S Avana 893 is a dispersion of iron oxides, titanium dioxide, and inert filler in paraffin oil. This product has a pigment concentration of 67%. Color Paste S Avana 893 is most commonly used as a coloring in solvent and hot-melt packaging tape...Vea Mas Color Paste S Avana 893 is a dispersion of iron oxides, titanium dioxide, and inert filler in paraffin oil. This product has a pigment concentration of 67%. Color Paste S Avana 893 is most commonly used as a coloring in solvent and hot-melt packaging tape adhesive applications. Vea Menos | |
| Color Paste S Nero 54 | Ichemco | Color Paste S Nero 54 is a carbon black dispersion in resin and solvent. This product has a pigment concentration of 16%. Color Paste S Nero 54 is most commonly used as a coloring in rubber-based, solventborne pressure sensitive adhesive applications. | |
| Color Paste W Arancio 7 | Ichemco | Color Paste W Arancio 7 (Orange) is a water-based dispersion of organic and inorganic pigments. This product has a pigment concentration of 45%. Color Paste W Arancio 7 is most commonly used as a coloring in water-based acrylic adhesive applications. | |
| Color Paste W Avana 19 | Ichemco | Color Paste W Avana 19 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 62%. Color Paste W Arancio 7 is most commonly used as a coloring in water-based acrylic and SBR adhesive applications. | |
| Color Paste W Avana 5 | Ichemco | Color Paste W Avana 5 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 60-65%. Color Paste W Avana 5 is most commonly used as a coloring in water-based acrylic and SBR adhesive and packing tape applica...Vea Mas Color Paste W Avana 5 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 60-65%. Color Paste W Avana 5 is most commonly used as a coloring in water-based acrylic and SBR adhesive and packing tape applications. Vea Menos | |
| Color Paste W Avana 7 | Ichemco | Color Paste W Avana 7 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 58%. Color Paste W Avana 7 is most commonly used as a coloring in water-based acrylic and SBR adhesive and packing tape applicatio...Vea Mas Color Paste W Avana 7 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 58%. Color Paste W Avana 7 is most commonly used as a coloring in water-based acrylic and SBR adhesive and packing tape applications. Vea Menos | |
| Color Paste W Avana 8 | Ichemco | Color Paste W Avana 8 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 61%. Color Paste W Avana 8 is most commonly used as a coloring in water-based acrylic and SBR adhesive and packing tape applicatio...Vea Mas Color Paste W Avana 8 (Brown) is a water-based dispersion of inorganic pigments. This product has a pigment concentration of 61%. Color Paste W Avana 8 is most commonly used as a coloring in water-based acrylic and SBR adhesive and packing tape applications. Vea Menos | |
| Color Paste W Bianco 4 | Ichemco | Color Paste W Bianco 4 (White) is a water-based dispersion of rutile titanium dioxide. This product has a pigment concentration of 56%. Color Paste W Bianco 4 is most commonly used as a coloring in water-based acrylic and SBR adhesive and white packaging ...Vea Mas Color Paste W Bianco 4 (White) is a water-based dispersion of rutile titanium dioxide. This product has a pigment concentration of 56%. Color Paste W Bianco 4 is most commonly used as a coloring in water-based acrylic and SBR adhesive and white packaging tape applications. Vea Menos | |
| Color Paste W Blu 61 | Ichemco | Color Paste W Blu 61 (Blue) is a water-based dispersion of organic and inorganic pigments. This product has a pigment concentration of 48%. Color Paste W Blu 61 is most commonly used as a coloring in water-based acrylic and SBR adhesive applications. | |
| Color Paste W Giallo 220 | Ichemco | Color Paste W Giallo 220 (Yellow) is a water-based dispersion of rutile titanium dioxide and yellow pigments. This product has a pigment concentration of 48%. Color Paste W Giallo 220 is most commonly used to impart a yellow color in water-based acrylic...Vea Mas Color Paste W Giallo 220 (Yellow) is a water-based dispersion of rutile titanium dioxide and yellow pigments. This product has a pigment concentration of 48%. Color Paste W Giallo 220 is most commonly used to impart a yellow color in water-based acrylic adhesive, SBR adhesive, and packaging tape production applications. Vea Menos | |
| Color Paste W Honey | Ichemco | Color Paste W Honey is a water-based dispersion of organic and inorganic pigments. This product has a pigment concentration of 60%. Color Paste W Honey is most commonly used as a coloring in packaging tape production applications. | |
| Color Paste W Nero 3 | Ichemco | Color Paste W Nero 3 is a carbon-black water dispersion. This product has a pigment concentration of 38%. Color Paste W Nero 3 is most commonly used as a coloring in water-based coating system applications. | |
| Color Paste W Rosso 13 | Ichemco | Color Paste W Rosso 13 is a water dispersion of of organic and inorganic pigments (P.I. White 6, Red 2). This product has a pigment concentration of 40%. Color Paste W Rosso 13 is most commonly used as a coloring in water-based acrylic and SBR adhesive, a...Vea Mas Color Paste W Rosso 13 is a water dispersion of of organic and inorganic pigments (P.I. White 6, Red 2). This product has a pigment concentration of 40%. Color Paste W Rosso 13 is most commonly used as a coloring in water-based acrylic and SBR adhesive, as well as packaging tape production applications. Vea Menos | |
| Color Paste W Verde 20 | Ichemco | Color Paste W Verde 20 (Green) is a water-based dispersion of organic and inorganic pigments. This product has a pigment concentration of 46%. Color Paste W Verde 20 is most commonly used as a coloring in water-based acrylic adhesive and packaging tape pr...Vea Mas Color Paste W Verde 20 (Green) is a water-based dispersion of organic and inorganic pigments. This product has a pigment concentration of 46%. Color Paste W Verde 20 is most commonly used as a coloring in water-based acrylic adhesive and packaging tape production applications. Vea Menos | |
| Color Tape HM Amber 1 | Ichemco | Color Tape HM Amber 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Amber 1 is most commonly used to i...Vea Mas Color Tape HM Amber 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Amber 1 is most commonly used to impart an amber 1 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 1 | Ichemco | Color Tape HM Avana 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 1 is most commonly used to i...Vea Mas Color Tape HM Avana 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 1 is most commonly used to impart a brown 1 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 10 | Ichemco | Color Tape HM Avana 10 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 10 is most commonly used to...Vea Mas Color Tape HM Avana 10 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 10 is most commonly used to impart a brown 10 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 11 | Ichemco | Color Tape HM Avana 11 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 11 is most commonly used to...Vea Mas Color Tape HM Avana 11 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 11 is most commonly used to impart a brown 11 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 15 | Ichemco | Color Tape HM Avana 15 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 15 is most commonly used to...Vea Mas Color Tape HM Avana 15 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 15 is most commonly used to impart a brown 15 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 19 | Ichemco | Color Tape HM Avana 19 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 19 is most commonly used to...Vea Mas Color Tape HM Avana 19 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 19 is most commonly used to impart a brown 19 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 2 | Ichemco | Color Tape HM Avana 2 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 2 is most commonly used to i...Vea Mas Color Tape HM Avana 2 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 2 is most commonly used to impart a brown 2 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 21 | Ichemco | Color Tape HM Avana 21 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 21 is most commonly used to...Vea Mas Color Tape HM Avana 21 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 21 is most commonly used to impart a brown 21 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 26 | Ichemco | Color Tape HM Avana 26 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 26 is most commonly used to...Vea Mas Color Tape HM Avana 26 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 26 is most commonly used to impart a brown 26 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 40 | Ichemco | Color Tape HM Avana 40 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 40 is most commonly used to...Vea Mas Color Tape HM Avana 40 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 40 is most commonly used to impart a brown 40 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 5 | Ichemco | Color Tape HM Avana 5 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 5 is most commonly used to i...Vea Mas Color Tape HM Avana 5 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 5 is most commonly used to impart a brown 5 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 6 | Ichemco | Color Tape HM Avana 6 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 6 is most commonly used to i...Vea Mas Color Tape HM Avana 6 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 6 is most commonly used to impart a brown 6 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 81 | Ichemco | Color Tape HM Avana 81 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Avana 81 is most commonly used to i...Vea Mas Color Tape HM Avana 81 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Avana 81 is most commonly used to impart a brown 81 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 9 | Ichemco | Color Tape HM Avana 9 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 9 is most commonly used to i...Vea Mas Color Tape HM Avana 9 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 9 is most commonly used to impart a brown 9 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Bianco 20 | Ichemco | Color Tape HM Bianco 20 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20 is most commonly used to...Vea Mas Color Tape HM Bianco 20 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20 is most commonly used to impart a white 20 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Bianco 20/C | Ichemco | Color Tape HM Bianco 20/C is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20/C is most commonly u...Vea Mas Color Tape HM Bianco 20/C is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20/C is most commonly used to impart a white 20/C color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Bianco P74 | Ichemco | Color Tape HM Bianco P74 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Bianco P74 is most commonly used ...Vea Mas Color Tape HM Bianco P74 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Bianco P74 is most commonly used to impart a white P74 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape W Dry White | Ichemco | Color Tape W Dry White is a white pigment masterbatch in a dust-free bead form. This product has a pigment concentration of 82%. Color Tape W Dry White is most commonly used as a coloring in water-based acrylic adhesive production applications. | |
| Colorant Blue WS 40 | Ichemco | Colorant Blue WS 40 is a blue-colored cationic dye. This product is most commonly used to impart a blue tint in printing ink applications. | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...Vea Mas Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. Vea Menos | |
| Curing Agent ASB | Ichemco | Curing Agent ASB is a metallorganic compound solution. This product has a total solids content of 5.5-6.5%. Curing Agent ASB is most commonly used as a curing and cross-linking agent in solvent-based acrylic adhesive applications. | |
| Curing Agent C8 | Ichemco | Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to...Vea Mas Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...Vea Mas Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...Vea Mas Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent W 9 | Ichemco | Curing Agent W 9 is a liquid polyisocyanate. This product has a total solids content of 79-81%. Curing Agent W 9 is most commonly used as a curing and cross-linking agent in water-based adhesive, varnish, and lacquer applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...Vea Mas Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. Vea Menos | |
| Curing Agent W3 DIL | Ichemco | Curing Agent W3 DIL is a water-dispersable polyisocyanate. This product has a total solids content of 69-71%. Curing Agent W3 DIL is most commonly used as a curing and cross-linking agent in adhesive, paint, and lacquer applications. | |
| Defoamer FL 1 Conc. | Ichemco | Defoamer FL 1 Conc. is a non-siliconic, organic defoamer. This product has a Brookfield viscosity at 25°C of 500-1500 mPa.s. Defoamer FL 1 Conc. is most commonly used as a defoaming agent in water-based paint, plaster, and adhesive emulsion applications. | |
| Defoamer FL 9 | Ichemco | Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive...Vea Mas Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive adhesive applications. Vea Menos | |
| Diluente 70/30 | Ichemco | Diluente 70/30 is a solvent blend of 70% ethyl alcohol and 30% ethyl acetate. This product is most commonly used in nitrocellulose ink dilution applications. | |
| Diluente C Nitro | Ichemco | Diluente C Nitro is an ink thinner. This product is most commonly used as a thinner in Color Ink PP Nitro applications. | |
| Diluente C PAM | Ichemco | Diluente C PAM is a solvent blend for polyamidic printing inks. This product is most commonly used to restore evaporated solvents in old inks. | |
| Diluente C PVC | Ichemco | Diluente C PVC is a blend of methyl ethyl ketone and ethyl acetate. This product is most commonly used to dilute Color Ink PVC products. | |
| Disper AC 8 | Ichemco | Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based p...Vea Mas Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based paint applications. Vea Menos | |
| Fastener C PAM | Ichemco | Fastener C PAM is a solvent additive. This product is compliant with the gas-chromatographic test. Fastener C PAM is most commonly used as an additive to increase the drying speed of Color Ink PP PAM+Add and Color Ink PP PAMC products. |
