| Additive ST 2 | Ichemco | Additive ST 2 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an additive in Color Ink PP PAMC and Color Ink PP PAM+Add applications to improve protection of the printed area in case of ink transfer. | |
| Additive ST 2X | Ichemco | Additive ST 2X is a polycondensed urethane solution in xylene. This product has a total solids content of 11.5-12.5%. Additive ST 2X is most commonly used as an ink additive added before printing onto PP acrylic and solventborne PSA tapes. | |
| Additive ST2/14 | Ichemco | Additive ST2/14 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Additive ST2/14 ECO | Ichemco | Additive ST2/14 ECO is a polycondensed urethane solution in aliphatic solvents. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antiox 2246 | Ichemco | Antiox 2246 is a phenolic antioxidant. This product has a melting range of greater than 125°C. Antiox 2246 is most commonly used as an antioxidant in solvent-based adhesive applications. | |
| Antiox AHM | Ichemco | Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and c...Vea Mas Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. Vea Menos | |
| Antiox AHM-EC Pellets | Ichemco | Antiox AHM-EC Pellets are a blend of four non-staining antioxidants. This product has a total solids content of 98-100%. Antiox AHM-EC Pellets are most commonly used as a UV protector in pressure sensitive adhesive and coating applications. | |
| Antiox LX | Ichemco | Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural r...Vea Mas Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural rubber, SBR, and resin adhesive applications. Vea Menos | |
| Antischiuma FL5 | Ichemco | Antischiuma FL5 is a VOC-free, organic defoamer. This product has a Brookfield viscosity at 25°C of 200-500 mPa.s. Antischiuma FL5 is most commonly used as a defoaming agent in water-based adhesive production applications. | |
| Blendex 31 | Ichemco | Blendex 31 is a solvent-based, heat sealable adhesive. This product has a total solids content of 21-23% and a Brookfield viscosity at 25°C of 400-1000 cPs. Blendex 31 is most commonly used to bond rubber compounds to metal and polymeric substrates. | |
| Blendex 55 F | Ichemco | Blendex 55 F is a solvent-free, one-component moisture curing polyurethane adhesive. This product has a viscosity at 100°C of 750-1000 mPa.s. Blendex 55 F is most commonly used in fabric and film lamination applications. | |
| Blendex 70 A | Ichemco | Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most common...Vea Mas Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most commonly used as a solvent adhesive in coating system applications. Vea Menos | |
| Blendex 75 A | Ichemco | Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most comm...Vea Mas Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most commonly used as a solvent adhesive in coating system applications. Vea Menos | |
| Blendex 81 T | Ichemco | Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in f...Vea Mas Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in film and fabric lamination applications. Vea Menos | |
| Blendex B1 | Ichemco | Blendex B1 is a liquid blend of synthetic polymers and natural resins. This product has a viscosity at 3500-8000 cPa. Blendex B1 is most commonly used in solvent adhesive production applications. | |
| Blendex PVC 10 | Ichemco | Blendex PVC 10 is a heat-sealable, transparent, solvent-based printing lacquer. This product is most commonly used to improve scrubbing and water resistance in paper, PVC, and PET coating applications. | |
| Blendex S 24/20 | Ichemco | Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonl...Vea Mas Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex S 24/25 A | Ichemco | Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly us...Vea Mas Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex S 24/25 MA | Ichemco | Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamina...Vea Mas Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex S 79 | Ichemco | Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applic...Vea Mas Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applications. Vea Menos | |
| Blendex S 79 T | Ichemco | Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transf...Vea Mas Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transfer coating applications. Vea Menos | |
| Blendex S12 20 | Ichemco | Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly...Vea Mas Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly used as a soft heat sealable adhesive in lamination applications. Vea Menos | |
| Blendex Seal 81 DH | Ichemco | Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, fo...Vea Mas Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal 81 DH (V1) | Ichemco | Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 D...Vea Mas Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 DH (V1) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal 81 DH (V2) | Ichemco | Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesi...Vea Mas Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal 81 DH (V3) | Ichemco | Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesi...Vea Mas Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal C6 | Ichemco | Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, f...Vea Mas Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal C6 (V3) | Ichemco | Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,00...Vea Mas Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal C6 (V3) is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 14 | Ichemco | Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile ap...Vea Mas Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile applications. Vea Menos | |
| Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...Vea Mas Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...Vea Mas Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat s...Vea Mas Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat ...Vea Mas Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 M (V2) | Ichemco | Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in f...Vea Mas Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex Seal DH 8 M (V3) | Ichemco | Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in f...Vea Mas Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. Vea Menos | |
| Blendex WUM | Ichemco | Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboa...Vea Mas Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboard applications. Vea Menos | |
| Color Lac N65 | Ichemco | Color Lac N65 is a transparent ink in an ethyl acetate/IPA solvent solution. This product is most commonly used in security tape production applications. | |
| Color Paste S Avana 893 | Ichemco | Color Paste S Avana 893 is a dispersion of iron oxides, titanium dioxide, and inert filler in paraffin oil. This product has a pigment concentration of 67%. Color Paste S Avana 893 is most commonly used as a coloring in solvent and hot-melt packaging tape...Vea Mas Color Paste S Avana 893 is a dispersion of iron oxides, titanium dioxide, and inert filler in paraffin oil. This product has a pigment concentration of 67%. Color Paste S Avana 893 is most commonly used as a coloring in solvent and hot-melt packaging tape adhesive applications. Vea Menos | |
| Color Tape HM Avana 1 | Ichemco | Color Tape HM Avana 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 1 is most commonly used to i...Vea Mas Color Tape HM Avana 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 1 is most commonly used to impart a brown 1 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 10 | Ichemco | Color Tape HM Avana 10 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 10 is most commonly used to...Vea Mas Color Tape HM Avana 10 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 10 is most commonly used to impart a brown 10 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 11 | Ichemco | Color Tape HM Avana 11 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 11 is most commonly used to...Vea Mas Color Tape HM Avana 11 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 11 is most commonly used to impart a brown 11 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 15 | Ichemco | Color Tape HM Avana 15 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 15 is most commonly used to...Vea Mas Color Tape HM Avana 15 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 15 is most commonly used to impart a brown 15 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 19 | Ichemco | Color Tape HM Avana 19 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 19 is most commonly used to...Vea Mas Color Tape HM Avana 19 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 19 is most commonly used to impart a brown 19 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 2 | Ichemco | Color Tape HM Avana 2 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 2 is most commonly used to i...Vea Mas Color Tape HM Avana 2 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 2 is most commonly used to impart a brown 2 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 21 | Ichemco | Color Tape HM Avana 21 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 21 is most commonly used to...Vea Mas Color Tape HM Avana 21 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 21 is most commonly used to impart a brown 21 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 26 | Ichemco | Color Tape HM Avana 26 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 26 is most commonly used to...Vea Mas Color Tape HM Avana 26 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 26 is most commonly used to impart a brown 26 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 40 | Ichemco | Color Tape HM Avana 40 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 40 is most commonly used to...Vea Mas Color Tape HM Avana 40 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 40 is most commonly used to impart a brown 40 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 5 | Ichemco | Color Tape HM Avana 5 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 5 is most commonly used to i...Vea Mas Color Tape HM Avana 5 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 5 is most commonly used to impart a brown 5 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 6 | Ichemco | Color Tape HM Avana 6 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 6 is most commonly used to i...Vea Mas Color Tape HM Avana 6 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 6 is most commonly used to impart a brown 6 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 81 | Ichemco | Color Tape HM Avana 81 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Avana 81 is most commonly used to i...Vea Mas Color Tape HM Avana 81 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Avana 81 is most commonly used to impart a brown 81 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Avana 9 | Ichemco | Color Tape HM Avana 9 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 9 is most commonly used to i...Vea Mas Color Tape HM Avana 9 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 9 is most commonly used to impart a brown 9 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Bianco 20 | Ichemco | Color Tape HM Bianco 20 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20 is most commonly used to...Vea Mas Color Tape HM Bianco 20 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20 is most commonly used to impart a white 20 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Bianco 20/C | Ichemco | Color Tape HM Bianco 20/C is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20/C is most commonly u...Vea Mas Color Tape HM Bianco 20/C is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20/C is most commonly used to impart a white 20/C color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape HM Bianco P74 | Ichemco | Color Tape HM Bianco P74 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Bianco P74 is most commonly used ...Vea Mas Color Tape HM Bianco P74 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Bianco P74 is most commonly used to impart a white P74 color in solvent and hot-melt adhesive mass production applications. Vea Menos | |
| Color Tape W Dry White | Ichemco | Color Tape W Dry White is a white pigment masterbatch in a dust-free bead form. This product has a pigment concentration of 82%. Color Tape W Dry White is most commonly used as a coloring in water-based acrylic adhesive production applications. | |
| Colorant Blue WS 40 | Ichemco | Colorant Blue WS 40 is a blue-colored cationic dye. This product is most commonly used to impart a blue tint in printing ink applications. | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...Vea Mas Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. Vea Menos | |
| Curing Agent ASB | Ichemco | Curing Agent ASB is a metallorganic compound solution. This product has a total solids content of 5.5-6.5%. Curing Agent ASB is most commonly used as a curing and cross-linking agent in solvent-based acrylic adhesive applications. | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...Vea Mas Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...Vea Mas Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent W 9 | Ichemco | Curing Agent W 9 is a liquid polyisocyanate. This product has a total solids content of 79-81%. Curing Agent W 9 is most commonly used as a curing and cross-linking agent in water-based adhesive, varnish, and lacquer applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...Vea Mas Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. Vea Menos | |
| Curing Agent W3 DIL | Ichemco | Curing Agent W3 DIL is a water-dispersable polyisocyanate. This product has a total solids content of 69-71%. Curing Agent W3 DIL is most commonly used as a curing and cross-linking agent in adhesive, paint, and lacquer applications. | |
| Defoamer FL 1 Conc. | Ichemco | Defoamer FL 1 Conc. is a non-siliconic, organic defoamer. This product has a Brookfield viscosity at 25°C of 500-1500 mPa.s. Defoamer FL 1 Conc. is most commonly used as a defoaming agent in water-based paint, plaster, and adhesive emulsion applications. | |
| Defoamer FL 9 | Ichemco | Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive...Vea Mas Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive adhesive applications. Vea Menos | |
| Diluente 70/30 | Ichemco | Diluente 70/30 is a solvent blend of 70% ethyl alcohol and 30% ethyl acetate. This product is most commonly used in nitrocellulose ink dilution applications. | |
| Diluente C Nitro | Ichemco | Diluente C Nitro is an ink thinner. This product is most commonly used as a thinner in Color Ink PP Nitro applications. | |
| Diluente C PAM | Ichemco | Diluente C PAM is a solvent blend for polyamidic printing inks. This product is most commonly used to restore evaporated solvents in old inks. | |
| Diluente C PVC | Ichemco | Diluente C PVC is a blend of methyl ethyl ketone and ethyl acetate. This product is most commonly used to dilute Color Ink PVC products. | |
| Disper AC 8 | Ichemco | Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based p...Vea Mas Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based paint applications. Vea Menos | |
| Fastener C PAM | Ichemco | Fastener C PAM is a solvent additive. This product is compliant with the gas-chromatographic test. Fastener C PAM is most commonly used as an additive to increase the drying speed of Color Ink PP PAM+Add and Color Ink PP PAMC products. | |
| Flameretarder GO | Ichemco | Flameretarder GO is a halogen-based flame retardant water dispersion. This product has a total solids content of 68-71% and a Brookfield viscosity at 25°C of 7000-11,000 cPs. Flameretarder GO is most commonly used as a flame resistant coating in fabric,...Vea Mas Flameretarder GO is a halogen-based flame retardant water dispersion. This product has a total solids content of 68-71% and a Brookfield viscosity at 25°C of 7000-11,000 cPs. Flameretarder GO is most commonly used as a flame resistant coating in fabric, fiber, and non-woven applications. Vea Menos | |
| Flameretarder HWF | Ichemco | Flameretarder HWF is a halogen-free, formadehyde-free, nitrogen-based flame retardant. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 10-50 cPs. Flameretarder HWF is most commonly used as a flame resistant coatin...Vea Mas Flameretarder HWF is a halogen-free, formadehyde-free, nitrogen-based flame retardant. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 10-50 cPs. Flameretarder HWF is most commonly used as a flame resistant coating in natural fiber applications. Vea Menos | |
| Ithane 02 | Ichemco | Ithane 02 is an aromatic thermoplastic polyurethane in a dry granule form. This product has a Brookfield viscosity at 25°C of 460-680 cPs. Ithane 02 is most commonly used in shoe adhesive applications. | |
| Ithane 15/25 | Ichemco | Ithane 15/25 is a solvent-based, heat sealable adhesive. This product has a total solids content of 24-26%. Ithane 15/25 is most commonly used as a soft heat sealable adhesive in lamination applications. | |
| Release FL7 | Ichemco | Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating ap...Vea Mas Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating applications. Vea Menos | |
| Release FR 100 | Ichemco | Release FR 100 is a vegetable oil, release agent, and polyamidic resin-based compound. This product has a total solids content of 98-100%. Release FR 100 is most commonly used in PS adhesive tape and film productions applications. | |
| Release FR 100 V | Ichemco | Release FR 100 V is a release agent. This product has a total solids content of 99-100%. Release FR 100 V is most commonly used in PE and aluminum tape production applications. | |
| Release FR 2 AB | Ichemco | Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape a...Vea Mas Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape and film production applications. Vea Menos | |
| Release FR 5 C | Ichemco | Release FR 5 C is an additive and release agent-based compound in a toluene solution. This product has a total solids content of 4-6%. Release FR 5 C is most commonly used as a release agent in PS adhesive tape and film production applications. | |
| Release K 100 D | Ichemco | Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating ...Vea Mas Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 D DIL.2 | Ichemco | Release K 100 D DIL.2 is a polyvinylcarbonate release agent in a toluene solvent solution. This product has a total solids content of 1.8-2.2%. Release K 100 D DIL.2 is most commonly used in adhesive tape production applications. | |
| Release K 100 DI | Ichemco | Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coatin...Vea Mas Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 DI DIL. 1 ECO | Ichemco | Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive...Vea Mas Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive tape production applications. Vea Menos | |
| Release K 100 DI DIL. 1.5 ECO | Ichemco | Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhe...Vea Mas Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhesive tape production applications. Vea Menos | |
| Release K 100 DM | Ichemco | Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as...Vea Mas Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 E | Ichemco | Release K 100 E is a release agent . This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 E is most commonly used as a release agent in PE and PP film coating applications. | |
| Release K 100 ES | Ichemco | Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating a...Vea Mas Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 H | Ichemco | Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating ap...Vea Mas Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 Q | Ichemco | Release K 100 Q is a synthetic resin blend. This product has a total solids content of 99-100%. Release K 100 Q is most commonly used as a release agent in polyolephinic self-adhesive tape applications. | |
| Release Master K20 E PP | Ichemco | Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applicati...Vea Mas Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. Vea Menos | |
| Release PP 100 | Ichemco | Release PP 100 is a synthetic polymer. This product has a total solids content of 98-100% and a melting point of 83-93°C. Release PP 100 is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release PP 25 | Ichemco | Release PP 25 is a synthetic polymer in a solvent solution. This product has a total solids content of 22-24% and a melting range of 90-115°C. Release PP 25 is most commonly used as a release agent in adhesive tape printing applications. | |
| Release PP 25 DIL | Ichemco | Release PP 25 DIL is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.41-0.51%. Release PP 25 DIL is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.35 | Ichemco | Release PP 25 DIL. 0.35 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.3-0.4%. Release PP 25 DIL. 0.35 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. |
