| Barifine® BF-26 | Kowa American Corporation | Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-40 | Kowa American Corporation | Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encap...voir plus Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| BASONAT® F 200 WD | BASF Dispersions & Resins | Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins | |
| BellPearl® C2000 | Kowa American Corporation | BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low ...voir plus BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® C800 | Kowa American Corporation | BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low v...voir plus BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® R100 | Kowa American Corporation | BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R200 | Kowa American Corporation | BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R800 | Kowa American Corporation | BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® S190 | Kowa American Corporation | BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S290 | Kowa American Corporation | BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S830 | Kowa American Corporation | BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S870 | Kowa American Corporation | BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S890 | Kowa American Corporation | BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S895 | Kowa American Corporation | BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| Benzyl Acrylate (BZA, V-160) | Kowa American Corporation | Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. | Request Sample |
| Benzyl Methacrylate (BZMA) | Kowa American Corporation | Benzyl Methacrylate (BZMA) is a clear water white liquid. When shipped, it is packed in 200Kg (441lb) chemical drums. | Request Sample |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...voir plus CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...voir plus CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...voir plus CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. voir moins | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...voir plus CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-180 | Kowa American Corporation | Chemisnow® MX-180 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-2000 | Kowa American Corporation | Chemisnow® MX-2000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-300 | Kowa American Corporation | Chemisnow® MX-300 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-3000 | Kowa American Corporation | Chemisnow® MX-3000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-500 | Kowa American Corporation | Chemisnow® MX-500 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MZ-10HN | Kowa American Corporation | Chemisnow® MZ-10HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-12H | Kowa American Corporation | Chemisnow® MZ-12H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-16H | Kowa American Corporation | Chemisnow® MZ-16H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-20HN | Kowa American Corporation | Chemisnow® MZ-20HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-30H | Kowa American Corporation | Chemisnow® MZ-30H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® SGP-150C | Kowa American Corporation | Chemisnow® SGP-150C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SGP-70C | Kowa American Corporation | Chemisnow® SGP-70C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SX-130H | Kowa American Corporation | Chemisnow® SX-130H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-350H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-500H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Cyclohexyl Acrylate (CHA, V-155) | Kowa American Corporation | Cyclohexyl Acrylate (CHA, V-155) is a clear water white liquid. When shipped, it is packed in 180 Kg (397lb) steel drums. | Request Sample |
| Cyclohexyl Methacrylate (CHMA) | Kowa American Corporation | Cyclohexyl Methacrylate (CHMA) is a clear water white liquid. It is insoluble in water. | Request Sample |
| Dimethyl Acrylamide (DMAA) | Kowa American Corporation | Dimethyl Acrylamide (DMAA) is a clear, colorless liquid with slight odor. This product is completely soluble in water. | Request Sample |
| Dimethylamino Propyl Methacrylamide (DMAPMA) | Kowa American Corporation | Dimethylamino Propyl Methacrylamide (DMAPMA) is a light, yellow clear liquid. It is used in flocculants and water soluble polymers. | Request Sample |
| Dimethylaminoethyl Methacrylate (DMMA) | Kowa American Corporation | Dimethylaminoethyl Methacrylate (DMMA) is a Mitsubishi Rayon methacrylate functional monomer. | Request Sample |
| DPMP | Kowa American Corporation | DPMP is a polythiols in coating form for use in epoxy curing agents. Polythiols, when added in a curing agent, will contribute well to its adhesiveness. | Request Sample |
| DURANOL™ G3450J | Kowa American Corporation | DURANOL™ G3450J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts good abrasion resistance, lower crystallinity, and lower viscosity. This product is recommended for UV-cure coatings and adhesive applications. | Request Sample |
| DURANOL™ G3452 | Kowa American Corporation | DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyuret...voir plus DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. voir moins | Request Sample |
| DURANOL™ G4672 | Kowa American Corporation | DURANOL™ G4672 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4671 | Kowa American Corporation | DURANOL™ T4671 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4691 | Kowa American Corporation | DURANOL™ T4691 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4692 | Kowa American Corporation | DURANOL™ T4692 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
| DURANOL™ T5650E | Kowa American Corporation | DURANOL™ T5650E is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and adhesives. | Request Sample |
| DURANOL™ T5650J | Kowa American Corporation | DURANOL™ T5650J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and for adhesives agents. | Request Sample |
| Duranol™ T5651 Soft Polycarbonatediol (PCD) | Kowa American Corporation | Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a...voir plus Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a softer feel as a binder in soft feel coatings. Duranol™ T5651 is easy to handle and exhibits good solvent solubility. It is amorphous and possesses stress at a low strain smaller than that of solid type PCD. Duranol™ T5651 is designed for various coating and other similar applications. voir moins | Request Sample |
| DURANOL™ T5652 | Kowa American Corporation | DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyureth...voir plus DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. voir moins | Request Sample |
| DURANOL™ T6001 | Kowa American Corporation | DURANOL™ T6001 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane elastomers and dispersions. | Request Sample |
| DURANOL™ T6002 | Kowa American Corporation | DURANOL™ T6002 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane resins for artificial leather and polyurethane dispersions. | Request Sample |
| Ethylene Glycol Dimethacrylate (EDMA) | Kowa American Corporation | Ethylene Glycol Dimethacrylate (EDMA) is a clear water white liquid. It is 0.18% soluble in water and 0.70% in water in EDMA. | Request Sample |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...voir plus Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. voir moins | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...voir plus Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. voir moins | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...voir plus Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. voir moins | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...voir plus Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. voir moins | |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...voir plus GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...voir plus GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins |
