| Acetyl Tributyl Citrate (ATBC) | Chemceed | Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics...voir plus Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics products such as aerosol hair sprays and nail polishes. In addition, ATBC can be used for pharmaceutical coatings (USP grade available), lubricants, and inks. voir moins | |
| ACRESIN® A 204 UV | BASF Dispersions & Resins | acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, w...voir plus acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® UV 3532 | BASF Dispersions & Resins | acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weight...voir plus acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. voir moins | |
| ACRONAL® 3630 | BASF Dispersions & Resins | Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, t...voir plus Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. voir moins | |
| ACRONAL® 3633 | BASF Dispersions & Resins | Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...voir plus Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. voir moins | |
| ACRONAL® 3636 X | BASF Dispersions & Resins | Acronal® 3636 X is an APEO-free, aqueous adhesive dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® 4 D | BASF Dispersions & Resins | Acronal® 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles. | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4034 | BASF Dispersions & Resins | Acronal® 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes. | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending. | |
| ACRONAL® 4510 | BASF Dispersions & Resins | Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also di...voir plus Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of Acronal® 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. voir moins | |
| ACRONAL® A 110 | BASF Dispersions & Resins | Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins | |
| ACRONAL® A 145 | BASF Dispersions & Resins | Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® A 240 NA | BASF Dispersions & Resins | Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 245 | BASF Dispersions & Resins | Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® DS 3502 | BASF Dispersions & Resins | Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins | |
| ACRONAL® DS 3598 NA | BASF Dispersions & Resins | Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® LA 449 S | BASF Dispersions & Resins | Acronal® LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles. | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2278 X | BASF Dispersions & Resins | Acronal® NX 2278 is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® NX 4021 | BASF Dispersions & Resins | Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability. | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins | |
| ACRONAL® NX 5818 | BASF Dispersions & Resins | Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins | |
| ACRONAL® S 504 NA | BASF Dispersions & Resins | Acronal® S 504 na is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications. | |
| ACRONAL® V 210 NA | BASF Dispersions & Resins | Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| BASONAT® F 200 WD | BASF Dispersions & Resins | Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins | |
| Benzotriazole | Chemceed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...voir plus Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. voir moins | |
| Benzyl Alcohol USP | Chemceed | Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due...voir plus Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due to its bacteriostatic and antipruritic properties. voir moins | |
| Benzyl Benzoate, USP | Chemceed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| Butyl Benzyl Phthalate (BBP) | Chemceed | Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP...voir plus Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP also finds use in many coatings, inks, adhesives, and caulks. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Decabromodiphenyl Oxide | Chemceed | Decabromodiphenyl Oxide is used as a flame retardant for elastomers, wire & cable, textile coatings, electrical & electronic equipment, automotive parts, and construction materials. | |
| Denatonium Benzoate, 20% in EG | Chemceed | Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint ...voir plus Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint stripper and toilet cleaner. voir moins | |
| Dibutyl Maleate (DBM) | Chemceed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...voir plus Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. voir moins | |
| Dibutyl Phthalate (DBP) | Chemceed | Dibutyl phthalate (DBP) is a plasticizer used in applications such as adhesives, lacquers and printing inks. Dibutyl phthalate can be used as a secondary plasticizer with other phthalates for highly concentrated PVC compounds. | |
| Dibutyl Sebacate (DBS) | Chemceed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...voir plus Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. voir moins | |
| Diisodecyl Adipate (DIDA) | Chemceed | Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl ...voir plus Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl butyral. In inks and coatings, DIDA can soften binders to improve flexibility. DIDA can also be used in used in adhesives, caulk, sealants, and paint to improve properties. voir moins | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...voir plus Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. voir moins | |
| Diisononyl Phthalate (DINP) | Chemceed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...voir plus Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. voir moins | |
| Dimethyl Sebacate (DMS) | Chemceed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...voir plus Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. voir moins | |
| Dioctyl Adipate (DOA) | Chemceed | Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipat...voir plus Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipate can be used as a plasticizer in food contact polymers and rubbers. voir moins | |
| Dioctyl Phthalate (DOP) | Chemceed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...voir plus Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. voir moins | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...voir plus Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. voir moins | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...voir plus Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. voir moins | |
| Disodium Sebacate (DSS) | Chemceed | Disodium Sebacate is a castor oil derivative which can be used in cosmetics, detergents, and as a corrosion inhibitor lubricants. | |
| Epoxidized Soybean Oil (ESO) | Chemceed | Epoxidized Soybean Oil (ESO) is used as a co-plasticizer for flexible PVC applications, as well as a secondary heat and light stabilizer. In addition, ESO acts as an acid scavenger for soy-based inks, agricultural chemicals, and insecticides. ESO can be u...voir plus Epoxidized Soybean Oil (ESO) is used as a co-plasticizer for flexible PVC applications, as well as a secondary heat and light stabilizer. In addition, ESO acts as an acid scavenger for soy-based inks, agricultural chemicals, and insecticides. ESO can be used as a pigment dispersion agent, chemical intermediate, and in lubricants and cutting oils. voir moins | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...voir plus Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. voir moins | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...voir plus Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. voir moins | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...voir plus Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. voir moins | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...voir plus Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. voir moins | |
| IRGASTAB® UV 22 | BASF Dispersions & Resins | Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins | |
| Isocryl® C-70 | Estron Chemical, Inc. | Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford co...voir plus Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford coatings or adhesives with excellent chemical resistance, flexibility, outdoor durability, green strength, modulus and impact resistance. Because of its relatively high acid value, Isocryl® C-70 may provide enhanced adhesion to certain substrates and may be a good pigment dispersing resin. voir moins | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...voir plus JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| L911P Plasticizer | Chemceed | Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in a...voir plus Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in anti- fogging coatings, automotive sealants, and shoe polish. voir moins | |
| Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...voir plus Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. voir moins | |
| LUPHEN® D 207 E | BASF Dispersions & Resins | Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack...voir plus Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. voir moins | |
| LUPHEN® D 259 U | BASF Dispersions & Resins | Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins |
