| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Ethyl Acrylate | Henan Harvest Chem Co., LTD. | Ethyl Acrylate is a clear, colorless liquid with a pungent odor. This product has a molecular weight of 100.13. Ethyl Acrylate is used in the production of coatings, elastomers, adhesives, thickeners, superabsorbents, acrylic esters, and fiber sizing. | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...voir plus Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. voir moins | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...voir plus Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. voir moins | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...voir plus Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. voir moins | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...voir plus Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. voir moins | |
| KOMERATE A0010 | Green Chemical Co., Ltd. | KOMERATE A0010 is an aliphatic monofunctional acrylate monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A0010M | Green Chemical Co., Ltd. | KOMERATE A0010M is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and excellent solvency. | |
| KOMERATE A0016 | Green Chemical Co., Ltd. | KOMERATE A0016 is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and good compatibility. | |
| KOMERATE A0016M | Green Chemical Co., Ltd. | KOMERATE A0016M is a monofunctional monomer. It is characterized by good adhesion and high Tg. | |
| KOMERATE A0017 | Green Chemical Co., Ltd. | KOMERATE A0017 is an aliphatic, monofunctional tertiobutyl cyclohexanol acrylate. Fast reactivity, low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A0017M | Green Chemical Co., Ltd. | KOMERATE A0017M is an aliphatic, monofunctional tertiobutyl cyclohexanol methacrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A002 | Green Chemical Co., Ltd. | KOMERATE A002 is a monofunctional monomer. It is characterized by good solvency and good adhesion on metal and plastics. | |
| KOMERATE A003 | Green Chemical Co., Ltd. | KOMERATE A003 is a monofunctional monomer. It has high refractive index and low volatility. | |
| KOMERATE A003M | Green Chemical Co., Ltd. | KOMERATE A003M is a monofunctional monomer. It is used to make polymers of high refractive index. | |
| KOMERATE A005 | Green Chemical Co., Ltd. | KOMERATE A005 is tetrahydrofurfuryl acrylate. It is a low viscosity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A005M | Green Chemical Co., Ltd. | KOMERATE A005M is a monofunctional monomer. It is characterized by excellent adhesion and good chemical resistance. | |
| KOMERATE A007 | Green Chemical Co., Ltd. | KOMERATE A007 is ethoxy ethoxy ethyl acrylate. It is a low viscosity monomer that offers good adhesion, flexibility, and low shrinkage properties. | |
| KOMERATE A008 | Green Chemical Co., Ltd. | KOMERATE A008 is a monofunctional monomer. It is characterized by high refractive index and good adhesion. | |
| KOMERATE A011 | Green Chemical Co., Ltd. | KOMERATE A011 is an ethoxylated o-phenylphenol acrylate monomer. It has high refractive index, low shrinkage, and good adhesion product. | |
| KOMERATE A014 | Green Chemical Co., Ltd. | KOMERATE A014 is phenol (EO) acrylate. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A014M | Green Chemical Co., Ltd. | KOMERATE A014M is a monofunctional methacrylate monomer. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A015 | Green Chemical Co., Ltd. | KOMERATE A015 is tetrahydrofurfuryl acrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015M | Green Chemical Co., Ltd. | KOMERATE A015M is mono-functional methacrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015P | Green Chemical Co., Ltd. | KOMERATE A015P is a monofunctional monomer. It is characterized by low skin irritation, and good adhesion. | |
| KOMERATE A021 | Green Chemical Co., Ltd. | KOMERATE A021 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A024 | Green Chemical Co., Ltd. | KOMERATE A024 is phenol (EO)2 acrylate. It is a low volatility mono-functional, aromatic monomer that is good viscosity reducer. | |
| KOMERATE A026 | Green Chemical Co., Ltd. | KOMERATE A026 is a monofunctional monomer. It is characterized by low odor, low shrinkage, and low skin irritation. | |
| KOMERATE A030 | Green Chemical Co., Ltd. | KOMERATE A030 is mono-functional monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A030M | Green Chemical Co., Ltd. | KOMERATE A030M is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A031 | Green Chemical Co., Ltd. | KOMERATE A031 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A040 | Green Chemical Co., Ltd. | KOMERATE A040 is a methoxy PEG400 acrylate monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040M | Green Chemical Co., Ltd. | KOMERATE A040M is a monofunctional methaacrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040TT | Green Chemical Co., Ltd. | KOMERATE A040TT is a methoxy PEG400 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A044 | Green Chemical Co., Ltd. | KOMERATE A044 is mono-functional acrylate monomer. Offers low volatility, low shrinkage and good adhesion. | |
| KOMERATE A046 | Green Chemical Co., Ltd. | KOMERATE A046 is a monofunctional monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A050 | Green Chemical Co., Ltd. | KOMERATE A050 is a methoxy PEG500 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A050M | Green Chemical Co., Ltd. | KOMERATE A050M is a monofunctional monomer. It is characterized by good water solubility, low shrinkage, and excellent wetting. | |
| KOMERATE A060 | Green Chemical Co., Ltd. | KOMERATE A060 is a mono-functional acrylate monomer. It features water solubility, excellent wetting, and low Tg. | |
| KOMERATE A060M | Green Chemical Co., Ltd. | KOMERATE A060M is a mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A086 | Green Chemical Co., Ltd. | KOMERATE A086 is a monofunctional acrylate monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A089 | Green Chemical Co., Ltd. | KOMERATE A089 is a monofunctional monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A099 | Green Chemical Co., Ltd. | KOMERATE A099 is a reactive diluent that polymerizes when exposed to sources of free radicals. | |
| KOMERATE A100 | Green Chemical Co., Ltd. | KOMERATE A100 is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A100M | Green Chemical Co., Ltd. | KOMERATE A100M is methoxy polyethylene glycol monomethacrylate. It features water solubility, and excellent wetting. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A109 | Green Chemical Co., Ltd. | KOMERATE A109 is a monofunctional monomer with long chain. It is characterized by good adhesion, low shrinkage and flexibility. | |
| KOMERATE A109M | Green Chemical Co., Ltd. | KOMERATE A109M is a monofunctional monomer. It is characterized by good flexibility, and good adhesion. | |
| KOMERATE A129 | Green Chemical Co., Ltd. | KOMERATE A129 is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A1290 | Green Chemical Co., Ltd. | KOMERATE A1290 is lauryl acrylate forms homopolymers and copolymers. It has a low viscosity and low toxicity monomer. | |
| KOMERATE A1290M | Green Chemical Co., Ltd. | KOMERATE A1290M is a monofunctional monomer. It is characterized by long chain hydrophobic group. It offers adhesion, flexibility, and low skin irritation. | |
| KOMERATE A1291 | Green Chemical Co., Ltd. | KOMERATE A1291 is Lauryl Acrylate 1214 (LA 1214), which is a low viscosity, low toxicity monomer with a long pendant aliphatic chain and the high reactivity of acrylates. | |
| KOMERATE A1291M | Green Chemical Co., Ltd. | KOMERATE A1291M is Lauryl methacrylate 1214 (LMA 1214) is a low viscosity, low toxicity monomer with a long pendant aliphatic chain and the high reactivity of acrylates. It is characterized by good adhesion, low shrinkage and flexibility. | |
| KOMERATE A129M | Green Chemical Co., Ltd. | KOMERATE A129M is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A149 | Green Chemical Co., Ltd. | KOMERATE A149 is tetradecyl acrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A149M | Green Chemical Co., Ltd. | KOMERATE A149M is a monofunctional monomer. It is characterized by good adhesion and good flexibility. | |
| KOMERATE A169 | Green Chemical Co., Ltd. | KOMERATE A169 is a monofunctional monomer. It is characterized by good flexibility, low shrinkage, and good adhesion. | |
| KOMERATE A1691 | Green Chemical Co., Ltd. | KOMERATE A1691 iscetyl acrylate. It is a monomer with a long chain hydrophobic backbone. It is used for manufacturing polymers and for use as a feed stock for syntheses. | |
| KOMERATE A169M | Green Chemical Co., Ltd. | KOMERATE A169M is a monofunctional methacrylate monomer. It is characterized by good flexibility, low shrinkage, and good water resistance. | |
| KOMERATE A189 | Green Chemical Co., Ltd. | KOMERATE A189 is stearyl acrylate or octadecyl acrylate. It is a monomer with a long chain hydrophobic backbone. It may act as a bubble breaker. | |
| KOMERATE A1891 | Green Chemical Co., Ltd. | KOMERATE A1891 is monofunctional acrylate monomer. It is a monomer with a long chain hydrophobic backbone. | |
| KOMERATE A189M | Green Chemical Co., Ltd. | KOMERATE A189M is stearyl methacrylate or octadecyl metha. It is a monomer with a long chain hydrophobic backbone. | |
| KOMERATE A2013 | Green Chemical Co., Ltd. | KOMERATE A2013 is monofunctional acrylate monomer. It has a water soluble, flexible, and low shrinkage. | |
| KOMERATE A209 | Green Chemical Co., Ltd. | KOMERATE A209 is a monofunctional monomer. It is characterized by low shrinkage, and good adhesion. | |
| KOMERATE A2091 | Green Chemical Co., Ltd. | KOMERATE A2091 is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A229 | Green Chemical Co., Ltd. | KOMERATE A229 is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A2291 | Green Chemical Co., Ltd. | KOMERATE A2291 is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A2291M | Green Chemical Co., Ltd. | KOMERATE A2291M is a monofunctional methacrylate monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A229M | Green Chemical Co., Ltd. | KOMERATE A229M is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A4013 | Green Chemical Co., Ltd. | KOMERATE A4013 is an Ethoxylated Allyl Acrylate that provides good water solubility and excellent wetting. | |
| KOMERATE C002 | Green Chemical Co., Ltd. | KOMERATE C002 is in the class of carboxylic monomers of the acrylic or methaclic acid type. More compatible with other monomers, thus reducing aqueous phase polymerization and producing more uniform copolymers. | |
| KOMERATE C021 | Green Chemical Co., Ltd. | KOMERATE C021 is caprolactone acrylate monomer. It offers low odor, low Tg and low skin irritation. | |
| KOMERATE D0013 | Green Chemical Co., Ltd. | KOMERATE D0013 is difunctional acrylate monomer. It possesses fast cure and low shrinkage. | |
| KOMERATE D002 | Green Chemical Co., Ltd. | KOMERATE D002 is di-functional acrylate monomer. It possesses low volatility, a hydrophobic backbone, good solvency, and fast curing. | |
| KOMERATE D002M | Green Chemical Co., Ltd. | KOMERATE D002M is a difunctional monomer. It is characterized by good solvency, hardness, and reforming. |
