| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...voir plus Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...voir plus Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. voir moins | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...voir plus Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. voir moins | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...voir plus Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. voir moins | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...voir plus Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. voir moins | |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...voir plus Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...voir plus Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...voir plus Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...voir plus Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...voir plus Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...voir plus Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...voir plus Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...voir plus Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1582E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1595E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1616E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1619E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1655E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1662A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1666A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 140-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1682E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1694A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1709A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1796A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1841E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1939E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 190-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2132E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 110-140°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2275E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to ble...voir plus Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to blend with other copolyesters to provide flame retardant properties. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2315E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2338E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2427E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2490A | EMS-CHEMIE AG (PRIMID) | Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2500E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® ES 500 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 500 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 500 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-200 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 501 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 501 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 501 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 160-180 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 502 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 502 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 502 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 503 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 503 is a hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissi...voir plus Griltex® ES 503 is a hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 180-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 504 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 504 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 504 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 505 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 505 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 505 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 180-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 700 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 700 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 700 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 130-170 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 701 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 701 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 701 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 130-160 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 702 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 702 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 702 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 160-190 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 703 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 703 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 703 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210°C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| Griltex® ES 704 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 704 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...voir plus Griltex® ES 704 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-190 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins |
