| BYK®-012 | BYK | BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants. | |
| BYK®-016 | BYK | BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants. | |
| BYK®-022 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-023 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-024 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-025 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-028 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-035 | BYK | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | |
| BYK®-037 | BYK | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | |
| BYK®-038 | BYK | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins | |
| BYK®-077 | BYK | BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...voir plus BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. voir moins | |
| BYK®-085 | BYK | Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...voir plus Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists. voir moins | |
| BYK®-088 | BYK | Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems. | |
| BYK®-093 | BYK | High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty. | |
| BYK®-1610 | BYK | BYK®-1610 is a defoamer for emulsion-based adhesives and sealants. | |
| BYK®-1615 | BYK | BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-3400 | BYK | BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-3410 | BYK | BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-345 | BYK | BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...voir plus BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. voir moins | |
| BYK®-346 | BYK | BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...voir plus BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. voir moins | |
| BYK®-347 | BYK | BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...voir plus BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. voir moins | |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...voir plus BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. voir moins | |
| BYK®-349 | BYK | BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...voir plus BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. voir moins | |
| BYK®-9076 | BYK | BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black. | |
| BYK®-9077 | BYK | BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mil...voir plus BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers. voir moins | |
| BYK®-A 530 | BYK | Air release agent and defoamer for solvent-based and solvent-free epoxy systems. | |
| BYK®-A 535 | BYK | Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants. | |
| BYK®-A 550 | BYK | BYK®-A 550 shows a strong air release effect without creating a strong haziness effect. | |
| BYK®-A 555 | BYK | BYK®-A 555 shows the highest efficiency in various adhesive applications. | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting. | |
| BYK®-W 940 | BYK | BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used. | |
| BYK®-W 961 | BYK | BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation. | |
| BYK®-W 966 | BYK | BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentati...voir plus BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation. voir moins | |
| BYK®-W 969 | BYK | BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants. | |
| BYK®-W 980 | BYK | BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation. | |
| BYK®-W 985 | BYK | BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedim...voir plus BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation. voir moins | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...voir plus CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. voir moins | |
| CLAYTONE® 40 | BYK | CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...voir plus CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. voir moins | |
| CLAYTONE® AF | BYK | CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a hig...voir plus CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels. voir moins | |
| CLAYTONE® APA | BYK | CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and ...voir plus CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. voir moins | |
| CLAYTONE® HT | BYK | CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...voir plus CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. voir moins | |
| CLAYTONE® HY | BYK | CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...voir plus CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. voir moins | |
| CLAYTONE-3 | BYK | CLAYTONE-3 is an cconomy rheological additive suitable for use in diesel, clean mineral oil and synthetic olefin-based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | |
| CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...voir plus CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. voir moins | |
| CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-VP V | BYK | CLAYTONE-VP V is a powdered rheology additive based on an organophilic phyllosilicate for non-polar to medium-polar systems to produce a thixotropic flow behavior. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DISPERBYK®-118 | BYK | DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...voir plus DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. voir moins | |
| DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DISPERBYK®-180 | BYK | Wetting and dispersing additive for aqueous, solvent-based and solvent-free adhesives and sealants. | |
| DISPERBYK®-190 | BYK | Wetting and dispersing additive for aqueous adhesives and sealants. | |
| DISPERBYK®-191 | BYK | Wetting and dispersing additive for aqueous adhesives and sealants. | |
| DISPERBYK®-192 | BYK | Wetting and dispersing additive for aqueous adhesives and sealants. | |
| DISPERBYK®-2018 | BYK | DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates. | |
| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...voir plus Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. voir moins | |
| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...voir plus Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. voir moins | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...voir plus Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. voir moins | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...voir plus Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. voir moins | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...voir plus Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. voir moins | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...voir plus Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. voir moins | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...voir plus DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient ...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| Dynasylan® SIVO 202 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 202 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® SIVO 203 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...voir plus Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMOEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, meta...voir plus Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning mainly as an efficient adhesion promoter and/or surface modifier. Dynasylan® VTMOEO is a colorless, low-viscosity liquid with a typical aromatic odor. voir moins | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins |
