| Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
| B-Tough™ A1 | Cargill Industrial Specialties | B-Tough™ A1 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ A2 | Cargill Industrial Specialties | B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low ...voir plus B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). voir moins | |
| B-Tough™ A3 | Cargill Industrial Specialties | B-Tough™ A3 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ C2r | Cargill Industrial Specialties | B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface ma...voir plus B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface marring for optimal protection. Furthermore, B-Tough™ C2r offers improved flexibility whilst maintaining hardness and enhanced durability to extend product lifetime. voir moins | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...voir plus FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. voir moins | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...voir plus Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. voir moins | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...voir plus Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. voir moins | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...voir plus Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. voir moins | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...voir plus Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. voir moins | |
| HP series™ HM080 | Polygroup Inc. | HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| NOVACOM-P™ HFS2100P | Polygroup Inc. | NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EV...voir plus NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EVOH, Nylon and other materials. Primarily markets for these materials are plastics compounding and mixed plastic recycle industries as compatibilizer. voir moins | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| Priamine™ 1071 | Cargill Industrial Specialties | Priamine™ 1071 is an amine functional building block that lends itself to use as a curative in epoxy systems for marine and off-shore coatings, heavy-duty industrial coatings, adhesives, and protective coatings for concrete flooring. | |
| Priamine 1073 | Cargill Industrial Specialties | Priamine 1073 is a low viscous dimer diamine building block for use in polyamides offering high flexibility, moisture repellency and adhesion to plastic. | |
| Priamine™ 1074 - Dimer Diamine | Cargill Industrial Specialties | Priamine™ 1074 is a low viscous dimer diamine building block for use in polyamides and polyurethane coatings and adhesives. It offers high flexibility, moisture repellency and adhesion. | |
| Priamine™ 1075 | Cargill Industrial Specialties | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
| Priplast™ 1837 | Cargill Industrial Specialties | Priplast™ 1837 is a di-functional polyester polyol for high-performing PU adhesives, sealants, and elastomers. It provides strong hydrophobicity and high flexibility also at very low temperatures for soft elastomers and adhesives. It brings good compatibi...voir plus Priplast™ 1837 is a di-functional polyester polyol for high-performing PU adhesives, sealants, and elastomers. It provides strong hydrophobicity and high flexibility also at very low temperatures for soft elastomers and adhesives. It brings good compatibility to low-polar components. In PU systems this polyol brings good adhesion to a variety of substrates and is therefore suitable for lightweight, laminate, and construction applications. voir moins | |
| Priplast 1838 | Cargill Industrial Specialties | Priplast 1838 is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plasti...voir plus Priplast 1838 is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plastics. voir moins | |
| Priplast™ 3162 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3162 is a semi crystalline polyester polyol building block for use in polyurethane dispersions. It offers good surface hardness combined with flexibility and good adhesion and offers excellent wetting of substrates. | |
| Priplast™ 3172 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3172 is a semi crystalline polyester polyol building block for use in polyurethane dispersions for very flexible substrates and reactive hotmelt polyurethane adhesives. It offers superior hydrolytic resistance and mechanical properties. | |
| Priplast 3186 | Cargill Industrial Specialties | Priplast 3186 is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. | |
| Priplast 3187 | Cargill Industrial Specialties | Priplast 3187 is a dimer fatty acid based polyester polyols building block for PU adhesives, sealants and elastomers; provides high flexibility at very low temperatures, and good compatibility to low polar components. | |
| Priplast™ 3190 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3190 is a semi crystalline polyester polyol building block for use in polyurethane coatings and adhesives. It offers good compatibility with polyether and polyester polyols. | |
| Priplast™ 3192 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3192 is a semi crystalline polyester polyol building block for use in polyurethane dispersions for use in both rigid and flexible substrates. It offers superior hydrolytic resistance and mechanical properties. | |
| Priplast 3196 | Cargill Industrial Specialties | Priplast 3196 is a diimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatibility for polymer blends. Possible use in soft touch applications...voir plus Priplast 3196 is a diimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatibility for polymer blends. Possible use in soft touch applications. voir moins | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...voir plus Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. voir moins | |
| Priplast™ 3237 | Cargill Industrial Specialties | Priplast™ 3237 provides low-viscosity liquid polyol and the proven flexibility of dimer-based technology. It can be used alone or as a co-polyol in PU resin applications, such as high solids 2K adhesive sealants, elastomers and coatings, to enhance proper...voir plus Priplast™ 3237 provides low-viscosity liquid polyol and the proven flexibility of dimer-based technology. It can be used alone or as a co-polyol in PU resin applications, such as high solids 2K adhesive sealants, elastomers and coatings, to enhance properties like chemical resistance and hydrophobicity. voir moins | |
| Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) | Cargill Industrial Specialties | Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and tempe...voir plus Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. voir moins | |
| Priplast™ 3294 | Cargill Industrial Specialties | Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with ...voir plus Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with a molecular weight of 2000. voir moins | |
| Pripol 1006 | Cargill Industrial Specialties | Pripol 1006 is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good color, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemi...voir plus Pripol 1006 is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good color, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. voir moins | |
| PRIPOL™ 1009 | Cargill Industrial Specialties | High purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility, thermo-oxidative stability and...voir plus High purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. voir moins | |
| Pripol 1010 VEG | Cargill Industrial Specialties | Pripol 1010 VEG is a lower viscosity dimer acid that provides your polyester and polyamide coatings with good color, water repellency and flexibility. It is also perfect for use in adhesives, engineering plastics and elastomers. Other benefits include the...voir plus Pripol 1010 VEG is a lower viscosity dimer acid that provides your polyester and polyamide coatings with good color, water repellency and flexibility. It is also perfect for use in adhesives, engineering plastics and elastomers. Other benefits include thermo-oxidative stability and excellent hydrolysis and chemical resistance. Pripol 1010 VEG is a high purity, di-functional, distilled and hydrogenated dimer acid building block. voir moins | |
| Pripol™ 1012 - Dimer Acid (Distilled) | Cargill Industrial Specialties | Pripol™ 1012 is a distilled dimer acid building block for use in polyester, polyamide and epoxy systems. It offers gives high toughness to polymers due to its high purity. | |
| Pripol™ 1013 - Dimer Acid (Distilled) | Cargill Industrial Specialties | Pripol™ 1013 is a distilled dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility and allows for higher molecular weight resins. | |
| Pripol™ 1017 - Dimer Acid | Cargill Industrial Specialties | Pripol™ 1017 is a dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility, pigment wetting and compatibility. | |
| Pripol™ 1022 VEG - Dimer Acid | Cargill Industrial Specialties | Pripol™ 1022 VEG is a dimer acid building block for use in polyester, polyamide and epoxy systems. It has low viscosity and offers flexibility, pigment wetting and compatibility. | |
| Pripol™ 1025 | Cargill Industrial Specialties | Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resist...voir plus Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. voir moins | |
| Pripol™ 1040 | Cargill Industrial Specialties | Pripol™ 1040 is a trimer acid building block for polyamide and epoxy modification. It is used for resin modification that brings extreme water repellency, corrosion inhibition, improved flexibility, hydrolytic stability, good flow and wetting properties, ...voir plus Pripol™ 1040 is a trimer acid building block for polyamide and epoxy modification. It is used for resin modification that brings extreme water repellency, corrosion inhibition, improved flexibility, hydrolytic stability, good flow and wetting properties, as well as good compatibility with other low polarity materials. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. voir moins | |
| Pripol 2030 Dimerdiol | Cargill Industrial Specialties | Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical re...voir plus Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical resistance. voir moins | |
| Pripol™ 2033 - Polyester Polyol (Amorphous) | Cargill Industrial Specialties | Pripol™ 2033 is a fully amorphous dimer diol for polyurethanes and polyesters. It offers extremely high chemical and hydrolysis resistance. | |
| Pripol™ 2043 | Cargill Industrial Specialties | Pripol™ 2043 is a 100% bio-based dimer diol with increased functionality (f.: 2.2) for adhesives with improved crosslinking and adhesion, particularly on PA, steel, and aluminum. In addition, the tensile strength of the adhesive increases with limited eff...voir plus Pripol™ 2043 is a 100% bio-based dimer diol with increased functionality (f.: 2.2) for adhesives with improved crosslinking and adhesion, particularly on PA, steel, and aluminum. In addition, the tensile strength of the adhesive increases with limited effect on elongation. voir moins | |
| Prisorine 3501 | Cargill Industrial Specialties | Prisorine 3501 s a liquid, long-chain hydrocarbon with excellent color and thermo-oxidative stability for automotive and industrial coatings. | |
| PROPOLDER™ MPP2010 | Polygroup Inc. | PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2020 | Polygroup Inc. | PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2040 | Polygroup Inc. | PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins |
