UL Prospector

成功!

成功保存搜索结果
Request Sample ADDITOL® P 791 Allnex 固体脂肪族聚酸酐固化剂,结合含缩水甘油基的固体丙烯酸树脂制备粉末涂料。基料比例与所采用缩水甘油基树脂的当量有关。适合丙烯酸应用
AQUACER® 507 BYK 毕克 基于氧化聚乙烯蜡(HDPE)的阴离子水性乳液,提高水性车用涂料体系的表面性能。
Accelerator 2950 Huntsman Advanced Materials 亨斯迈先进材料 当与多胺、聚酰胺及其加成物共用时,Accelerator 2950 固化剂是一种有效的促进剂和共反应固化剂。它可用于固化液体环氧树脂,例如用于无溶剂涂料及地坪体系中的 Araldite® GY 9708-3 树脂、Araldite® PY 302-2 树脂。它也可以用于固化固体环氧树脂或溶剂型固体环氧,如用于船舶维护的溶剂型 Araldite® GZ 7071 X 75 树脂。当其在主剂中用量为1-3%时,Accelerator 2950固化剂也是聚氨酯体系有效的促进剂及共反应固化剂。
Aradur® 340 Waterborne Epoxy Hardener Huntsman Advanced Materials 亨斯迈先进材料 Aradur®340水性环氧固化剂乳化液体环氧树脂,无需预乳化,即可制备水性高固含,常温固化涂料,适用于各种工业应用。另外,也可以结合Aradur®340水性环氧固化剂和环氧树脂乳液使用。
Aradur® 450 Hardener Huntsman Advanced Materials 亨斯迈先进材料 爱牢固® 450 固化剂是一种低粘度固化剂,专为高湿度或湿环境应用而设计。爱牢固 450 固化剂可与液态双酚A和/或双酚F环氧树脂配合使用,能够为湿混凝土基材提供最佳性能。
Ara®Cool 1034 XW 90 Huntsman Advanced Materials 亨斯迈先进材料 Ara®Cool 1034 XW 90是改性曼尼期碱类固化剂。它在低温下有极其长的可操作时间,以及显著的反应活性。它有非常低的VOC(<10%溶剂)。在0-5℃的低温下,漆膜硬度增长显著。在喷砂钢板上具有优异的柔韧性,附着力和防腐性。无需熟化即可消除漆膜泛白。与Accelerator 2950配合使用时,可获得显著的催化效果。
Ara®Cool 1047 W80 Huntsman Advanced Materials 亨斯迈先进材料 Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. T...展开 Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. This product imparts good hardness, outstanding surface appearance, recoatability, flexibility, and adhesion. 收起
Ara®Cool 3077 Huntsman Advanced Materials 亨斯迈先进材料 AraCool 3077是一种不含壬基酚和苯甲醇的胺类快速固化剂。可单独使用,或与其它Aradur固化剂配合使用。可用于替换Aradur 3369和Aradur 14(含SVHC:被高度关注的物质)。配制的涂料有以下特点:较好的机械性能;很高的反应活性;在低温下具有好的漆膜外观;不含双酚A,不含苯酚,不含壬基酚或烷基酚;不含苯甲醇(低排放固化剂)。
Request Sample BECKOCURE™ EH 2100w/44WA Allnex BECKOCURE® EH 2100W/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...展开 BECKOCURE® EH 2100W/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. 收起
Request Sample BECKOCURE™ EH 2260w/41WA Allnex Beckocure® EH 2260w/41WA是一种疏水性胺类固化剂,推荐用于水性金属涂料配方,不含挥发性碱性胺和溶剂。结合环氧乳液,可配制具有出色的防腐性及非常好的不流挂性能的快干底漆和单涂。该产品具有出色的施工性能和非常强大的性能,即使在前处理不良的表面上也一样。
Request Sample BECKOPOX™ EH 2189w/50WA Allnex Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...展开 Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. 收起
Request Sample BECKOPOX™ EH 623w/80WA Allnex 水性溶剂,无醋酸多胺环氧固化剂
Request Sample BECKOPOX™ EH 694 Allnex BECKOPOX® EH 694是一种酸酐固化剂,可结合固体环氧树脂,OH-官能团聚酯或作为环氧/聚酯混合体系附加的交联剂,用于制备粉末涂料。基于BECKOPOX® EH 694的配方具有良好的耐化学品和耐过烘烤性能。
Request Sample BECKOPOX™ VEH 2188w/55WA Allnex 高度憎水胺固化剂,尤其适用于无挥发性胺的水性金属涂料配方
Request Sample BECKOPOX™ VEH 2849w/80WA Allnex 水性无醋酸脂肪族多胺加合物,是一种高反应活性固化剂,可用于矿物金属基材水稀释涂料,其中快速固化和水释放性能相当重要
Barium Sulphate BS-419 Briture Co., Ltd. Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展开 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起
Bisomer® LMA 97SP GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® LMA 97SP 是一款疏水,低玻璃态转化温度(Tg)的单功能丙烯酸甲酯单体。作为聚合型塑化剂使用时,展现出很好的可塑性。使用Bisomer® LMA 97SP的配方可以减少不同批次产品在粘度、颜料润湿性、抗化学品性、附着力、硬度、剪切强度、粘性等性能上的差异性。 该产品是合成应用于工业涂料、印刷油墨、压敏胶等领域的高质量丙烯酸树脂的核心原料。
CERAFLOUR® 920 For Powder BYK 毕克 一种用在UV光固化粉末涂料中提高涂膜表面硬度的助剂。
CERETAN MXD 3920 Munzing Chemie CERETAN MXD 3920 is a white powder that is a micronized wax preparation, with a coating which provides diamond-like hardness. It has excellent surface hardness and scratch resistance. It is commonly used in industrial coatings, powder coatings, wood coati...展开 CERETAN MXD 3920 is a white powder that is a micronized wax preparation, with a coating which provides diamond-like hardness. It has excellent surface hardness and scratch resistance. It is commonly used in industrial coatings, powder coatings, wood coatings, can and coil coating. 收起
CM31 Zhejiang Changming Chemical Products Co., Ltd. CM31 is a low temperature quick hardener in the form of a pale yellow crystal. It increases mechanical properties and chemical resistance, and provides higher surface gloss. This product can be used in powder coating applications, and is also applicable t...展开 CM31 is a low temperature quick hardener in the form of a pale yellow crystal. It increases mechanical properties and chemical resistance, and provides higher surface gloss. This product can be used in powder coating applications, and is also applicable to epoxy-polyester powders. 收起
DYHARD® MIA5 AlzChem AG DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起
DYHARD® PI AlzChem AG DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed.
DYHARD® PI-FF AlzChem AG DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed.
Desmodur® N 3900 Covestro (formerly Bayer MaterialScience) 科思创 脂肪族多异氰酸酯,作为耐候性聚氨酯涂料体系的固化剂组份。
Desmodur® XP 2714 Covestro (formerly Bayer MaterialScience) 科思创 硅烷官能团脂肪族多异氰酸酯,基于六亚甲基二异氰酸酯,可作为耐光耐候涂料体系的固化剂组份
Desmodur® XP 2731 Covestro (formerly Bayer MaterialScience) 科思创 不含溶剂、耐光、耐刮擦的聚氨酯涂料体系的固化剂组份
Docure KC-305H Kukdo Chemical Co., Ltd. Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...展开 Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. 收起
Docure KC-335H Kukdo Chemical Co., Ltd. Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...展开 Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. 收起
Docure KH-505 Kukdo Chemical Co., Ltd. Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives.
Docure KH-506 Kukdo Chemical Co., Ltd. Docure KH-506 is an aliphatic amine modified mannich based hardener. KH-506 has good water spot resistance in the area of floorings. It is well suited for the production of solvent free coatings that are curable at low temperatures.
Docure KH-531 Kukdo Chemical Co., Ltd. Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the lam...展开 Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the laminating industries. 收起
Docure KH-550 Kukdo Chemical Co., Ltd. Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in ...展开 Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in injection systems and the production of solvent free coatings. 收起
Docure KH-602 Kukdo Chemical Co., Ltd. Docure KH-602 is an aliphatic amine modified hardener. KH-602 can be used as solvent free system due to low viscosity. It can be used for Injection systems and resin mortars. In addition it is well suited for use as an accelerator for other curing agents.
Docure KH-620 Kukdo Chemical Co., Ltd. Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemica...展开 Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemical processing equipment, tank linings and maintenance coatings. 收起
Domide GX-328B75 Kukdo Chemical Co., Ltd. Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curi...展开 Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. 收起
Domide GX-328K Kukdo Chemical Co., Ltd. Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...展开 Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. 收起
Domide GX-422 Kukdo Chemical Co., Ltd. Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...展开 Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. 收起
Domide GX-450TI60 Kukdo Chemical Co., Ltd. Domide GX-450TI60 is a Polyamide / Epoxy adduct dissolved in Toluene/Iso-propanol for reaction with solid Epoxy Resins. GX-450TI60 is useful in maintenance coatings and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin.
Domide GX-450XB70 Kukdo Chemical Co., Ltd. Domide GX-450XB70 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-450XB70 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin.
Domide GX-460 Kukdo Chemical Co., Ltd. Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...展开 Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. 收起
Domide GX-483 Kukdo Chemical Co., Ltd. Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...展开 Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. 收起
Domide GX-533 Kukdo Chemical Co., Ltd. Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings.
Easaqua™ M 501 Vencorex Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起
Easaqua™ M 502 Vencorex Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起
Easaqua™ WAT-3 Vencorex Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起
Easaqua™ WAT-4 Vencorex Easaqua™ WAT-4是一种以脂质聚异氰酸酯(HDI均聚物)为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂,根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂,用于汽车、家居装饰用品,配套皮革用品以及3D层压应用等汽车和家具行业。
Easaqua™ X D 401 Vencorex Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起
Easaqua™ X D 803 Vencorex Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起
Epoxy Hardener G-91 Worlée-Chemie G.m.b.H. 新型环氧固化剂,用于制备环氧粉末涂料,具有出色的机械性能和良好的颜色稳定性
Eutomer 288 (MDSA) Eutec Chemical Co., Ltd. Eutomer 288 (MDSA) is a white to light tan crystalline powdered form of 5,5’-Methylenedisalicylic Acid. It can be used as a hardener for powder coatings and thermosetting resins.
Eutomer B-31 Eutec Chemical Co., Ltd. Eutomer B-31 is a white to pale yellow flaked 2-Phenyl Imidazoline. This product is used as a hardener for highly reactive epoxy resin powder coatings.
Eutomer B-55 Eutec Chemical Co., Ltd. Eutomer B-55 is a white to off-white very fine powdered 1,2,4,5-Benzenetetracarboxylic acid, compound with 4,5-dihydro-2-phenyl-1H-imidazole (1:2). This product is used as a matting hardner for pure epoxy or epoxy/polyester resins powder coatings.
Eutomer B-68 Eutec Chemical Co., Ltd. Eutomer B-68 is a white to off-white very fine powdered 1,2,4,5-Benzenetetracarboxylic acid, compound with 4,5-dihydro-2-phenyl-1H-imidazole (1:1). It is used as a matting hardener for pure epoxy or epoxy/polyester resins powder coatings.
Fujicure FXD-821 Sanho Chemical Co., Ltd. Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起
Fujicure FXK-832 Sanho Chemical Co., Ltd. Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications.
Grilonit® H 81016 EMS-CHEMIE AG (PRIMID) Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins.
Grilonit® H 82044 EMS-CHEMIE AG (PRIMID) Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins.
Grilonit® H 82062 EMS-CHEMIE AG (PRIMID) Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins.
Grilonit® H 84024 EMS-CHEMIE AG (PRIMID) Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...展开 Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. 收起
Grilonit® H 84026 EMS-CHEMIE AG (PRIMID) Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...展开 Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. 收起
Grilonit® H 84043 EMS-CHEMIE AG (PRIMID) Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars.
HAA Hardener RC552 Hangzhou Right Chemical Co., Ltd. HAA Hardener RC552 is a tetra-functional group containing β-hydroxyalkylamide. This product appears as a white powder. It is designed to be a substitute for TGIC and can be used to provide exterior-durable powder coatings free from TGIC.
HAA Hardener RC559 Hangzhou Right Chemical Co., Ltd. HAA Hardener RC559 is a hydroxyalkyl amide hardener. This product appears as a white granular solid. It can be used to cure carboxyl-functional polyester for powder coating applications.
HARDENER X 60 Pidilite Industries Ltd. - Resins Division 芳香族异氰酸酯溶液,用作双组分聚氨酯涂料的固化剂
HS2266 Tianyi Chemical Engineering Material Co., Ltd. HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. Th...展开 HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. This product has a pH value between 8.0 and 9.0. It has a density between 1.08 and 1.12 g/cm3. 收起
HS2288 Tianyi Chemical Engineering Material Co., Ltd. HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...展开 HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. 收起
Hardener Accelerator JG803A Ningbo South Sea Chemical Co., Ltd. Hardener Accelerator JG803A is a yellowish-white grain or powder used as a hardener in high reactive epoxy resin powder coatings, and as an accelerator in dicyandiamide or hybrid powder coatings.
Hardener RC-31 Hangzhou Right Chemical Co., Ltd. Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelera...展开 Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelerator for dicyandiamide and epoxy polyester powder coatings. 收起
Hardener RC2844 Hangzhou Right Chemical Co., Ltd. Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatin...展开 Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatings. 收起
Hydrorene 10 S.A.P.I.C.I. SpA Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance.
Request Sample ITAMID B DKSH ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...展开 ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. 收起
Request Sample ITAMID C DKSH ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...展开 ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起
Request Sample ITAMID C/F DKSH ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...展开 ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起
Request Sample ITAMID D DKSH ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...展开 ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. 收起
Request Sample ITAMID FL 560 DKSH ITAMID FL 560 is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete and Very good handling.
Request Sample ITAMID FL 560S DKSH ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good h...展开 ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good handling. 收起
Request Sample ITAMID FL300 DKSH ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...展开 ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. 收起
Request Sample ITAMID FL31 DKSH ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起
Request Sample ITAMID FL32 DKSH ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起
Request Sample ITAMID FL328 DKSH ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...展开 ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. 收起
Request Sample ITAMID FL40/S DKSH ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...展开 ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. 收起
Request Sample ITAMID FL41W3 DKSH ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...展开 ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. 收起
Request Sample ITAMID FL540 DKSH ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water.
Request Sample ITAMINE CA165 DKSH ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure te...展开 ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure temperatures. ITAMINE CA 165 has good resistance to water spotting and also features good blush resistance. 收起
Request Sample ITAMINE CA30 DKSH ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for applica...展开 ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems): ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. 收起
Request Sample ITAMINE CA30LA DKSH ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for app...展开 ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems). 收起
Request Sample ITAMINE CA80 DKSH ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for applica...展开 ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems) The main properties of this hardener are the following: COMPLETE CURING EVEN AT LOW TEMPERATURE (0°C), ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. 收起
Request Sample ITAMINE FL43 DKSH ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Com...展开 ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, such as polyaminoamide resins, ITAMINE FL43 exhibits greater reactivity, resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures. Finally, comparing the classical amine hardeners, which are normally classified as “corrosive” substances, ITAMINE FL43 exhibits lower hazard (it is actually classified only as an “irritating” substance). 收起
Request Sample Incozol EH Incorez Ltd. Incozol是一种用于 1 K聚氨酯涂料、胶粘剂、密封剂和弹性体的聚氨酯双恶唑烷潜伏性固化剂。与低NCO的氨酯预聚物结合使用,该固化剂可以通过水分触发机制加速预聚物的处理,以负担1 K聚氨酯的交联效应。
Jietonda® SA2068 Luan Jietonda Chemical Co., Ltd. Jietonda® SA2068 is a very fine pale yellow powdered matting hardener that is to be used with TGIC as a co-reactant, and it provides a low gloss of ca.10% (60°). This product provides protection against impact and has excellent flow properties for exterio...展开 Jietonda® SA2068 is a very fine pale yellow powdered matting hardener that is to be used with TGIC as a co-reactant, and it provides a low gloss of ca.10% (60°). This product provides protection against impact and has excellent flow properties for exterior PEST/TGIC powder coatings. It can also be used in epoxy and epoxy/polyester hybrid powder coatings with a low-gloss finish. To achieve acceptable flow properties, it is required to cure this product at 200℃(metal temperature). 收起
Jietonda® SA31 Luan Jietonda Chemical Co., Ltd. Jietonda® SA31 is 2-phenyl imidazoline, white to yellow colored crystal, which can be used as a hardener for epoxy powder coatings. The system can achieve a full cross-linkage at low temperatures or accelerate curing conditions to around 140℃/30min or 240...展开 Jietonda® SA31 is 2-phenyl imidazoline, white to yellow colored crystal, which can be used as a hardener for epoxy powder coatings. The system can achieve a full cross-linkage at low temperatures or accelerate curing conditions to around 140℃/30min or 240℃/30s. When utilized as an accelerator, in can reduce the curing temperature or shorten the curing time of epoxy powder coatings. 收起
Kalama® Benzoic Acid Technical Chips Emerald Performance Materials Kalama® Benzoic Acid Technical Chips is a white flake benzoic acid used in paints and coatings to improve gloss, adhesion, hardness and chemical resistance of the final product.
Kingcure 2040-MS Sanho Chemical Co., Ltd. Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起
Kingcure I-934 Sanho Chemical Co., Ltd. Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起
Kingcure K-863A Sanho Chemical Co., Ltd. Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起
Kingcure M-510 Sanho Chemical Co., Ltd. Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...展开 Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. 收起
Kingcure X-2001 Sanho Chemical Co., Ltd. Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起
Request Sample Luna-cure PACM DKSH Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents ...展开 Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America. 收起
Request Sample Luna-mer 1174 DKSH Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is avai...展开 Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is available in Europe, Asia and North America. 收起
Request Sample Luna-mer B-31 DKSH Luna-mer B-31 is a hardener for highly reactive epoxy powder coatings, pure epoxy and accelerator for DICY or epoxy-polyester powder coatings. This product is available in Europe, Asia and North America.