| A-C 400 | DKSH | A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appl...展开 A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400A | DKSH | A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing ap...展开 A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405M | DKSH | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405T | DKSH | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...展开 A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...展开 A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| AB-1020 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-1020, in the form of a milky liquid, is a unique blend of additives and polyurethane (base coat) for automotive leathers. It has good embossing, good milling, aesthetic properties, abrasion resistance, flexibility, cold crack resistance, and water resi...展开 AB-1020, in the form of a milky liquid, is a unique blend of additives and polyurethane (base coat) for automotive leathers. It has good embossing, good milling, aesthetic properties, abrasion resistance, flexibility, cold crack resistance, and water resistance. AB-1020 is applicable for all types of leathers. 收起 | |
| AB-1211 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-1211, in the form of a milky liquid, is a unique blend of polyurethane acrylic resins embossable base coat for automotive leathers. It has good physical properties, good hydrolytic exposure flexibility resistance, abrasion resistance, cold crack resist...展开 AB-1211, in the form of a milky liquid, is a unique blend of polyurethane acrylic resins embossable base coat for automotive leathers. It has good physical properties, good hydrolytic exposure flexibility resistance, abrasion resistance, cold crack resistance, and water resistance. 收起 | |
| AB-1277 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-1277, in the form of a milky liquid, is a unique blend of acrylic polymers and polyurethane (base coat) for all types of leather finishes. It has good abrasion resistance, flexibility, cold crack resistance, water resistance, and more. | |
| AB-30F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, ...展开 AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. 收起 | |
| AB-687 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-687, in the form of a milky liquid/anionic/nonionic, is an acrylic resin binder (acrylic polymer). It has good adhesion and ultra-fine particle size imparts tighter break to corrected and full grain leathers. AB-687 is also used as tough, soft, emulsio...展开 AB-687, in the form of a milky liquid/anionic/nonionic, is an acrylic resin binder (acrylic polymer). It has good adhesion and ultra-fine particle size imparts tighter break to corrected and full grain leathers. AB-687 is also used as tough, soft, emulsion for base coat application suitable for finishing all types of leather. 收起 | |
| AB-70F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more. | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-90F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-90F, in the form of a clear anionic liquid, is aqueous polyurethane polymer dispersion with good stain and abrasion resistance. It is appropriate for a variety of coating applications such as, furniture, automotive, leather goods, and shoe leather. AB-...展开 AB-90F, in the form of a clear anionic liquid, is aqueous polyurethane polymer dispersion with good stain and abrasion resistance. It is appropriate for a variety of coating applications such as, furniture, automotive, leather goods, and shoe leather. AB-90F has good compatibility with hard polyurethane binders and acrylic resins. 收起 | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...展开 Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| AR-1263 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AR-1263, in the form of a milky liquid, is an acrylic resin binder (acrylic polymer). It has good light fastness, flexibility, wear resistance, and when combined with polyurethane resins emboss-able base coats with good print retention and coverage can be...展开 AR-1263, in the form of a milky liquid, is an acrylic resin binder (acrylic polymer). It has good light fastness, flexibility, wear resistance, and when combined with polyurethane resins emboss-able base coats with good print retention and coverage can be formulated. It can be used alone or in combination with polyurethane resins in base or topcoat applications for automotive leathers. 收起 | |
| CO2PURE AIR PURIFIER | DKSH | CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for pai...展开 CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia. 收起 | Request Sample |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...展开 DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DM-1010 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-1010, in the form of a clear anionic liquid, is a medium hard NMP free high performance aliphatic polyether polyurethane dispersion. This product has good coverage and filling characteristics. It can be used in combination with polyurethane or acrylic ...展开 DM-1010, in the form of a clear anionic liquid, is a medium hard NMP free high performance aliphatic polyether polyurethane dispersion. This product has good coverage and filling characteristics. It can be used in combination with polyurethane or acrylic resins or alone and is appropriate for all types of leather. 收起 | |
| DM-1114 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-1114, in the form of a milky anionic liquid, is a medium soft, inherently dull NMP free high performance aliphatic polyurethane dispersion. It is for use in intermediate coats for leather and leather topcoat applications where good flexibility, embossi...展开 DM-1114, in the form of a milky anionic liquid, is a medium soft, inherently dull NMP free high performance aliphatic polyurethane dispersion. It is for use in intermediate coats for leather and leather topcoat applications where good flexibility, embossing print retention and abrasion resistance is required. 收起 | |
| DM-831 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applicat...展开 DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applications where good flexibility, soft hand feel and lower gloss properties are required. 收起 | |
| DT-1169 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical ...展开 DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical properties and good flow. 收起 | |
| DT-1308 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce...展开 DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce gloss levels to meet OEM specifications. 收起 | |
| GMA | DKSH | Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy funct...展开 Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| GMA 97 | DKSH | Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy fu...展开 Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| IPDA | DKSH | IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in...展开 IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in all typical reactions of this kind of amine functional chemicals. It is widely miscible with a full range of alifatic, aromatic and halogenated solvents of different polarity. Chemical description: 3-aminomethyl-3,5,5-trimethylcyclohexylamine. This product is available in Europe and Korea. 收起 | Request Sample |
| ITAMID B | DKSH | ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...展开 ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID C | DKSH | ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...展开 ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID C/F | DKSH | ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...展开 ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID D | DKSH | ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...展开 ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. 收起 | Request Sample |
| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...展开 ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...展开 ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. 收起 | Request Sample |
| ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...展开 ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. 收起 | Request Sample |
| ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...展开 ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. 收起 | Request Sample |
| ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
| ITAMID M30P | DKSH | ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bondin...展开 ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bonding of PVC. 收起 | Request Sample |
| JK-230F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-230F, in the form of a clear anionic liquid, is NMP free aqueous polyurethane polymer dispersion with good abrasion and adhesion resistance. It can be used as a primary binder to formulate flexible and tough topcoats with high melting points and is app...展开 JK-230F, in the form of a clear anionic liquid, is NMP free aqueous polyurethane polymer dispersion with good abrasion and adhesion resistance. It can be used as a primary binder to formulate flexible and tough topcoats with high melting points and is applicable for all types of leather finishes. 收起 | |
| JK-233F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-233F, in the form of a clear anionic liquid, is NMP free aliphatic polyurethane binder that can be used in topcoat and base coat applications for high quality shoe leathers and upholstery. It creates tough coatings with great physical properties and so...展开 JK-233F, in the form of a clear anionic liquid, is NMP free aliphatic polyurethane binder that can be used in topcoat and base coat applications for high quality shoe leathers and upholstery. It creates tough coatings with great physical properties and soft feel that conveys flexible and soft finish with good water resistance and abrasion properties. JK-233 can normally be used in topcoats as an additive binder or in combination with acrylics to improve scuff resistance and emboss-ability. 收起 | |
| JK-535F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-535F, in the form of a clear anionic liquid, is a tough NMP free water-based polyurethane binder that conveys good physical properties such as, scuff resistance, water resistance, light fastness, elongation, and toughness. It can be used in topcoats an...展开 JK-535F, in the form of a clear anionic liquid, is a tough NMP free water-based polyurethane binder that conveys good physical properties such as, scuff resistance, water resistance, light fastness, elongation, and toughness. It can be used in topcoats and base coats for all types of leather finishes. 收起 | |
| JK-691FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-691FD, in the form of a clear anionic liquid, is a NMP free aqueous aliphatic lightfast polyurethane polymer with good stain resistance, abrasion resistance, high gloss, and tensile strength. It is applicable for use in topcoats and base coats for all ...展开 JK-691FD, in the form of a clear anionic liquid, is a NMP free aqueous aliphatic lightfast polyurethane polymer with good stain resistance, abrasion resistance, high gloss, and tensile strength. It is applicable for use in topcoats and base coats for all types of leather finishes. 收起 | |
| JK-702F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-702F, in the form of a hazy anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane dispersion resin. It has good block resistance, UV exposure resistance, and water resistance. It is an all-purpose polyurethane resin for leather app...展开 JK-702F, in the form of a hazy anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane dispersion resin. It has good block resistance, UV exposure resistance, and water resistance. It is an all-purpose polyurethane resin for leather applications where good flexibility, abrasion resistance and embossing properties are required. 收起 | |
| Luna ESBO A | DKSH | Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility...展开 Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility and to bring high functionality. Moderate cure speed, with low odor and skin irritancy. Good compatibility with non polar substrates. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-add RC961 | DKSH | Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This produ...展开 Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 550 | DKSH | Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be ...展开 Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be produced by using Luna-cryl 550 in conjunction with polyesters having acid values between 30-35 mg KOH/g. Standard polyester resins used for TGIC, HAA, GMA or Araldite PT-910 powder coatings are well suited for use with Lunacryl 550. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 700 | DKSH | Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 710 | DKSH | Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). Luna-cryl 710 offers improved flexibility as compared to its predecessor, Luna-cryl 700. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-pal A81 | DKSH | Luna-pal A81 is a polyaldehyde resin produced by condensation of urea aliphatic aldehydes. It is ideal for use in Pigment pastes and Industrial coatings. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal A81 K | DKSH | Luna-pal A81 K is a polyaldehyde resin with wide solubility and compatibility. It is ideal for use in pigment pastes and industrial coatings. Luna-pal A81 K has a softening range of 80-100ºC. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal A91 K | DKSH | Luna-pal A91 K is a polyaldehyde resin with wide solubility and compatibility. It is ideal for use in pigment pastes and industrial coatings. Luna-pal A91 K has a softening range of 90-100ºC. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal KY-A81-C (Benzene Free) | DKSH | Luna-pal KY-A81-C (Benzene Free) is a polyaldehyde resin for pigment dispersions, or to optimize pigment dispersion in inks and coatings. It shows excellent compatibility with many coating/printing raw materials. It is soluble in most organic solvents and...展开 Luna-pal KY-A81-C (Benzene Free) is a polyaldehyde resin for pigment dispersions, or to optimize pigment dispersion in inks and coatings. It shows excellent compatibility with many coating/printing raw materials. It is soluble in most organic solvents and has very good wetting and dispersion properties. It is a multifunctional additive used also to improve the adhesion, gloss, hardness, and solid content. It can also be used in universal pigment pastes. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-tex RC3940F | DKSH | Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is availab...展开 Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-tribo K T405 | DKSH | Luna-tribo K T405 is a masterbatch of an additive in a carboxylated polyester to enhance tribochargeability in powder coatings. Active content: 5% of a hindered tertiary amine. | Request Sample |
| Luna-vin UM 40/50 | DKSH | Luna-vin UM40/50 is a medium molecular weight co-polymer of vinyl chloride and vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-vin VAGD-W | DKSH | Luna-vin VAGD-W is a high molecular weight, with hydroxyl functional group, partially hydrolyzed vinyl chloride/vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-vin VAGH-W | DKSH | Luna-vin VAGH-W is a high molecular weight, with hydroxyl functional group, partially hydrolyzed vinyl chloride/vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-vin VMCC/A-W-N17 | DKSH | Luna-vin VMCC/A-W-N17 is a high molecular weight, with carboxyl functional group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North Amer...展开 Luna-vin VMCC/A-W-N17 is a high molecular weight, with carboxyl functional group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-vin VMCH-W | DKSH | Luna-vin VMCH-W is a high molecular weight, with carboxyl fuctional group, group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Maleic Acid Terpolymer resin. This product is available in Europe, A...展开 Luna-vin VMCH-W is a high molecular weight, with carboxyl fuctional group, group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Maleic Acid Terpolymer resin. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-vin VYHH-W (UM55) | DKSH | Luna-vin VYHH-W (UM55) is a high molecular weight copolymer of vinyl chloride and vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Copolymer. This product is available in Europe, Asia and North America. | Request Sample |
| MH-1991 | Quaker Color (a Division of McAdoo & Allen, Inc.) | MH-1991 is an Aliphatic urethane dispersion. Inherently low gloss (0.7-1.0). It is velvety soft with excellent household cleaners resistance, high hydrolytic and UV resistance. Automotive interior coatings could be formulated without the addition of fla...展开 MH-1991 is an Aliphatic urethane dispersion. Inherently low gloss (0.7-1.0). It is velvety soft with excellent household cleaners resistance, high hydrolytic and UV resistance. Automotive interior coatings could be formulated without the addition of flattening or feel additives. MH-1991 has high flexibility which makes it suitable for thermoforming coatings and hydroxyl functionality for isocyanate crosslinking. It is for use automotive interior, electronics, wood and plastic toys. 收起 | |
| MH-245 | Quaker Color (a Division of McAdoo & Allen, Inc.) | MH-245 is a high performance, low VOC aliphatic polyurethane dispersion designed for concrete coatings. MH-245 has hot tire pick up resistance when formulated as a one component coating. It can also be crosslinked with carbodiimines or isocyanate. | |
| MKC Silicate (Methyl Silicate Origomer) | DKSH | MKC Silicate is a self-cleaning additive for Paints (exterior deco, coil). It is made up of oligomers formed by the partial hydrolysis of tetramethoxysilane. By the hydrolysis of alcoxysilanes, silanol groups are generated and make the coating surface hyd...展开 MKC Silicate is a self-cleaning additive for Paints (exterior deco, coil). It is made up of oligomers formed by the partial hydrolysis of tetramethoxysilane. By the hydrolysis of alcoxysilanes, silanol groups are generated and make the coating surface hydrophilic. In the rain, the hydrophilic surface enhances dirt removal with a self-cleaning effect. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| ML4000R | Quaker Color (a Division of McAdoo & Allen, Inc.) | ML4000R, in the form of a white liquid, is a pre-base binder formulated for roll coating as an additive to repair and fill damaged leather grain surfaces with unwanted scars and open scratches. It promotes maximum shrinkage after drying, maximum adhesion,...展开 ML4000R, in the form of a white liquid, is a pre-base binder formulated for roll coating as an additive to repair and fill damaged leather grain surfaces with unwanted scars and open scratches. It promotes maximum shrinkage after drying, maximum adhesion, and finish flexibility. ML4000R can also be used as a base coat additive to encourage additional grain uniformity and coverage while upholding a fine finish break. 收起 | |
| NE-721FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | NE-721FD, in the form of a clear anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane polymer with good stain resistance, tensile strength, abrasion resistance, toughness. It is applicable in topcoats and base coats for all types of ...展开 NE-721FD, in the form of a clear anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane polymer with good stain resistance, tensile strength, abrasion resistance, toughness. It is applicable in topcoats and base coats for all types of leather finishes. 收起 | |
| PR-1238 | Quaker Color (a Division of McAdoo & Allen, Inc.) | PR-1238, in the form of a clear anionic liquid, is a soft NMP free aliphatic polyurethane resin with good bally flex properties and hydrolysis resistance. It is applicable in embossable leather base coats, Intermediate coats and some leather topcoat appli...展开 PR-1238, in the form of a clear anionic liquid, is a soft NMP free aliphatic polyurethane resin with good bally flex properties and hydrolysis resistance. It is applicable in embossable leather base coats, Intermediate coats and some leather topcoat applications where extreme flexibility is required. 收起 | |
| PR-1245 | Quaker Color (a Division of McAdoo & Allen, Inc.) | PR-1245, in the form of a hazy anionic liquid, is a medium hard, NMP free, high performance aliphatic polyurethane resin. It is for use in topcoats and intermediate coats for leather applications where exceptional hydrolytic stability, flexibility, and ab...展开 PR-1245, in the form of a hazy anionic liquid, is a medium hard, NMP free, high performance aliphatic polyurethane resin. It is for use in topcoats and intermediate coats for leather applications where exceptional hydrolytic stability, flexibility, and abrasion resistance is required. 收起 | |
| ROPOL PC-21 | DKSH | ROPOL PC-21 is Polycarbonated based on 1,5 Pentanediol and 1,6 Hexanediol, which enables it to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available in Europe and Asia. | Request Sample |
| ROPOL PC-22 | DKSH | ROPOL PC-22 is Polycarbonated based on 1,5 Pentanediol and 1,6 Hexanediol, which enables it to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available in Europe and Asia. | Request Sample |
| ST-844 | Quaker Color (a Division of McAdoo & Allen, Inc.) | ST-844 is a solvent free, inherently dull, soft feel aliphatic urethane dispersion. ST-844 has a unique combination between soft feel, flexibility and toughness. It can be used in conjunction with isocyanate crosslinker or as is. | |
| TK-1181 | Quaker Color (a Division of McAdoo & Allen, Inc.) | TK-1181 is a soft, water based, aromatic polyurethane dispersion use to promote adhesion and penetration in all types of leather base coats. It is used at levels between 5-20% in all types of leather base coats to promote adhesion and penetration. | |
| UM-1200 | Quaker Color (a Division of McAdoo & Allen, Inc.) | UM-1200, in the form of a whitish liquid, is a unique, solvent free, inherently dull polyurethane resin with exceptionally low gloss. UM-1200 can be used as the main component in leather topcoat formulations to produce very low gloss systems with exceptio...展开 UM-1200, in the form of a whitish liquid, is a unique, solvent free, inherently dull polyurethane resin with exceptionally low gloss. UM-1200 can be used as the main component in leather topcoat formulations to produce very low gloss systems with exceptional physical properties and soft touch hand feel. 收起 | |
| UVP-1300 (Unsaturated Polyester Acrylate Resin) | DKSH | UVP-1300 (Unsaturated Polyester Acrylate Resin) is a Solid resin for UV cured powder coatings. This product is available in Europe, Asia Pacific. | Request Sample |
| VYLON 103 | DKSH | VYLON 103 is a high molecular weight copolyester with medium Tg. VYLON 103 has very good adhesion properties on PVC, PET and other plastics. VYLON 103 is compliant with FDA 175.105 and EC 10/2011. This product is available in Europe, USA and India. | Request Sample |
| VYLON 200 | DKSH | VYLON 200 is a high molecular weight copolyester, with high Tg. VYLON 200 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON 200 is suitable for inks, primers, coating and adhesion, heat seal lacquers for fle...展开 VYLON 200 is a high molecular weight copolyester, with high Tg. VYLON 200 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON 200 is suitable for inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON 200 has an excellent flexibility, bending performance, workability, corrosion resistance, durability, heat-resistance, solvent solubility, pigment dispersibility and flame resistance. VYLON 200 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011. This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLON 600 | DKSH | VYLON 600 is a high molecular weight copolyester with medium Tg. VYLON 600 has excellent adhesion strength on metal, PET and PVC. Particularly recommended on coil coating and TTR. VYLON 600 is compliant with FDA 175.105 (only for non alcoholic food and...展开 VYLON 600 is a high molecular weight copolyester with medium Tg. VYLON 600 has excellent adhesion strength on metal, PET and PVC. Particularly recommended on coil coating and TTR. VYLON 600 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011. This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLON 630 | DKSH | VYLON 630 is a high molecular weight copolyester with low Tg. VYLON 630 has excellent flexibility and good general adhesion strength. VYLON 630 is recommended for adhesion on PET, PVC, metals, coil and can coatings. VYLON 630 is compliant with FDA 175....展开 VYLON 630 is a high molecular weight copolyester with low Tg. VYLON 630 has excellent flexibility and good general adhesion strength. VYLON 630 is recommended for adhesion on PET, PVC, metals, coil and can coatings. VYLON 630 is compliant with FDA 175.105 (only for non alcoholic food and beverage). This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLON 670 | DKSH | VYLON 670 is a high molecular weight copolyester with low Tg. VYLON 670 has excellent adhesion on metal and PET. VYLON 670 is recommended for heat seal application and coil coating. VYLON 670 is compliant with FDA 175.105 (only for non alcoholic food a...展开 VYLON 670 is a high molecular weight copolyester with low Tg. VYLON 670 has excellent adhesion on metal and PET. VYLON 670 is recommended for heat seal application and coil coating. VYLON 670 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011 This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLON GK-255 | DKSH | VYLON GK-255 is a high molecular weight copolyester, with high Tg. VYLON GK-255 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON GK-255 is suitable for inks, primers, coating and adhesion, heat seal lacquer...展开 VYLON GK-255 is a high molecular weight copolyester, with high Tg. VYLON GK-255 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON GK-255 is suitable for inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON GK-255 has an excellent flexibility, solvent solubility with high acid value. VYLON GK-255 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011. This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLON GK-360 | DKSH | VYLON GK-360 is a high molecular weight copolyester, with high Tg. VYLON GK-360 has an excellent weather resistance compare to other grades, and has good adhesion to PET and metal substrates. VYLON GK-360 is suitable for can and coil coatings, screen pr...展开 VYLON GK-360 is a high molecular weight copolyester, with high Tg. VYLON GK-360 has an excellent weather resistance compare to other grades, and has good adhesion to PET and metal substrates. VYLON GK-360 is suitable for can and coil coatings, screen printing inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON GK-360 is compliant with FDA 175.105. This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLON GK-888 | DKSH | VYLON GK-888 is a high molecular weight copolyester, with high Tg. VYLON GK-888 has an excellent chemical resistance due to its high Tg. VYLON GK-888 is suitable for can and coil coatings. VYLON GK-888 is compliant with FDA 175.105 and EC 10/2011. Thi...展开 VYLON GK-888 is a high molecular weight copolyester, with high Tg. VYLON GK-888 has an excellent chemical resistance due to its high Tg. VYLON GK-888 is suitable for can and coil coatings. VYLON GK-888 is compliant with FDA 175.105 and EC 10/2011. This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLONAL MD-1480 | DKSH | VYLONAL MD-1480 is a waterbased, high molecular weight copolyester. VYLONAL MD-1480 series have a Low Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-1480 series are compliant with FDA 175.105 and EC 10/2011 This product ...展开 VYLONAL MD-1480 is a waterbased, high molecular weight copolyester. VYLONAL MD-1480 series have a Low Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-1480 series are compliant with FDA 175.105 and EC 10/2011 This product is available in Europe, USA and India. 收起 | Request Sample |
| VYLONAL MD-2000 | DKSH | VYLONAL MD-2000 is a waterbased, high molecular weight copolyester. VYLONAL MD-2000 series have a high Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-2000 series are compliant with FDA 175.105 and EC 10/2011. This produc...展开 VYLONAL MD-2000 is a waterbased, high molecular weight copolyester. VYLONAL MD-2000 series have a high Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-2000 series are compliant with FDA 175.105 and EC 10/2011. This product is available in Europe, USA and India. 收起 | Request Sample |
| Wannate IPDI | DKSH | Wannate IPDI is a cycloaliphatic diisocyanate and as such a prefered raw material for the the synthesis of lightstable and water-risistant polyurethanes. It is a low-viscosity liquid with a week but specific odour. This product is available in Germany, Sw...展开 Wannate IPDI is a cycloaliphatic diisocyanate and as such a prefered raw material for the the synthesis of lightstable and water-risistant polyurethanes. It is a low-viscosity liquid with a week but specific odour. This product is available in Germany, Switzerland, Austria, Benelux, UK and Korea. 收起 | Request Sample |
| ZY-133 | Quaker Color (a Division of McAdoo & Allen, Inc.) | ZY-133 is NMP free oil modified aliphatic urethane suitable in coatings for light industrial direct to metal coatings with fast water resistance development requirement. It is also applicable for wood coatings, industrial coatings, and more. | |
| ZY-154D | Quaker Color (a Division of McAdoo & Allen, Inc.) | ZY-154D is NMP free oil modified urethane, soy-tung oil based, for coatings with good stain resistance and tannin blocking properties. It is highly suitable for formulating matte finishes, gloss, and semi-gloss finishes. |
