Amorphic™ A450 | Bunge Amorphic Solutions, LLC. | Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. 收起 | |
Amorphic™ A950 | Bunge Amorphic Solutions, LLC. | Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...展开 Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. 收起 | |
Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
Amorphic™ I700 | Bunge Amorphic Solutions, LLC. | Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...展开 Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. 收起 | |
BENTOBRITE® 770 | American Colloid Company | BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and othe...展开 BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and other industrial applications. 收起 | |
BENTOBRITE® KB-325 | American Colloid Company | BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used ...展开 BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used as a suspending agent, gellant, and binder for use in household products, automotive products and paints, aerosols, enamels and other industrial specialty applications where high solid levels and low viscosity are desired. 收起 | |
FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...展开 FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. 收起 | |
FY-F501 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or wa...展开 FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or water-based coatings and ink applications. 收起 | |
FY-F502 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F502 Fluoride Surfactant appears as a dark yellow transparent liquid. This product is used to reduce the surface tension of liquids and to increase foaming abilities. In particular, it can be used in solvent-based and water-based coatings and inks. | |
HECTABRITE® DP | American Colloid Company | HECTABRITE® DP is a highly purified white sodium hectorite that is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It exhibits a high degree of shear thinning a...展开 HECTABRITE® DP is a highly purified white sodium hectorite that is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It exhibits a high degree of shear thinning and can be used as a binder and plasticizer to ease extrusion and increase green strength in paints, ceramic glazes, and in other applications where a high degree of anti-settling and anti-sag are required. 收起 | |
HECTALITE® 200 | American Colloid Company | HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheolo...展开 HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheology and stability, and is typically used in architectural paints, ceramics, and adhesives. 收起 | |
JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
MAGNABRITE® T | American Colloid Company | MAGNABRITE® T is a highly-purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. This product is used whenever an inorganic, thixotropic material is desired to disperse pigments, retard settling, impart body or stabi...展开 MAGNABRITE® T is a highly-purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. This product is used whenever an inorganic, thixotropic material is desired to disperse pigments, retard settling, impart body or stabilize emulsions. It is a nonmigrating binder which delivers high yield values that enable the successful suspension of high-density pigments and particles. It can find applications in paints and ceramics. 收起 | |
MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
POLARGEL® | American Colloid Company | POLARGEL® is a specially processed, water-washed product that is a selectively-mined sodium montmorillonite clay, supplied as a white micro fine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer for a variety of indus...展开 POLARGEL® is a specially processed, water-washed product that is a selectively-mined sodium montmorillonite clay, supplied as a white micro fine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer for a variety of industrial products where low grit, light color, and high purity are required. 收起 | |
POLARGEL® CA | American Colloid Company | POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a bin...展开 POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a binder and plasticizer to ease extrusion and increase green strength with minimal viscosity increase. 收起 | |
POLARGEL® T | American Colloid Company | POLARGEL® T is a specially processed, water-washed product that is a selectively- mined sodium montmorillonite clay, supplied as a white microfine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer used in coatings. It...展开 POLARGEL® T is a specially processed, water-washed product that is a selectively- mined sodium montmorillonite clay, supplied as a white microfine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer used in coatings. It is used whenever a white, inorganic, thixotropic material is desired for formulations. 收起 | |
SI-TUFF™ SB-050G | Advanced Composite Materials, LLC | SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resista...展开 SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. 收起 | |
SI-TUFF™ SB-300G | Advanced Composite Materials, LLC | SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductiv...展开 SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. 收起 | |
SI-TUFF™ SC-050 | Advanced Composite Materials, LLC | SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tem...展开 SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
SI-TUFF™ SC-110 | Advanced Composite Materials, LLC | SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...展开 SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
SI-TUFF™ SC-210 | Advanced Composite Materials, LLC | SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...展开 SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
SI-TUFF™ SC-300 | Advanced Composite Materials, LLC | SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tempera...展开 SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. 收起 | |
VOLCLAY® 325 Mesh | American Colloid Company | VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial app...展开 VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial applications where low grit and a small, dry particle size are required. It can be applied in ceramics, porcelain and glaze applications. 收起 | |
VOLCLAY® GPG 30 | American Colloid Company | VOLCLAY® GPG 30 is a granular sodium bentonite with an average particle size ranging between 20 and 70 mesh. This product is a multi-purpose product noted for rapid dispersion in water. It is employed in a wide variety of industrial applications. | |
VOLCLAY® HPM-20 | American Colloid Company | VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, ...展开 VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in adhesives and industrial applications. 收起 | |
VOLCLAY® HPM-75 | American Colloid Company | VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion sta...展开 VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer for adhesives, coatings, and other industrial applications. 收起 | |
VOLCLAY® Rheospan | American Colloid Company | VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabi...展开 VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in a variety of industrial applications. 收起 | |
VOLCLAY® SPV 200 | American Colloid Company | VOLCLAY® SPV 200 is a selectively-mined and processed, high-quality sodium bentonite. This product is a multi-purpose suspending, emulsifying, and binding agent used in industrial products where a dry 200 mesh particle size is required. |