| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展开 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| 3-(Trimethoxysilyl)propyl Glycidyl Ether | Penpet Petrochemical Trading GmbH | 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled...展开 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled or glass-reinforced thermosets and thermoplastics. 收起 | |
| Acetone | Penpet Petrochemical Trading GmbH | Acetone, in the form of a colourless, clear liquid, is a basic raw material in the chemical industry that can be used in paint thinner. This product is soluble in water and is usually used as a laboratory solvent. | |
| Adipic Acid | Penpet Petrochemical Trading GmbH | Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...展开 Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. 收起 | |
| Alusil® ET | PQ Corporation - PQ公司 | Alusil® ET是一种水合无定形合成铝硅酸钠。它是作为一种二氧化钛增量剂应用于乳胶漆中。ALUMINASOL™是一种细而轻的粉末，应注意避免吸入。操作中应带上面罩，如果排气通风应开启。这种材料既不会导致矽肺，也不属于急性毒性，但安全方面要求它存储在干燥的地方，并合理地操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| Dioctylphthalate (DOTP) | Penpet Petrochemical Trading GmbH | Dioctylphthalate (DOTP), in the form of a colorless, odourless fluid, is a phthalate and an organic chemical compound. This product can be used in solvents and varnish. It is normally used as a plasticizer. | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展开 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Fumaric Acid | Penpet Petrochemical Trading GmbH | Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated pol...展开 Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated polyester resins, and in lubricants. 收起 | |
| Gasil® 114 | PQ Corporation - PQ公司 | GASIL®114是一种合成的无定形二氧化硅。它被用作硅土消光剂用于卷钢和罐头涂料，辐射固化涂料，和高固含量的涂料系统中用于控制光泽。它也可以用于直链低密度聚乙烯膜中作为高效防粘连剂。 GASIL®114是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 200DF | PQ Corporation - PQ公司 | GASIL® 200DF是一种合成的无定形二氧化硅。它具有良好的颗粒尺寸控制，可用于制备平滑的绘制涂料。它提供了出色的'齿'，用于增加铅笔接受度，高耐腐蚀剂抛光性和耐重影性，适用于对金属打标。它也被用作照相纸的背面涂料，用于增加铅笔和吸墨接受度和铝涂料中的水清除性。GASIL® 200DF是一种细而轻的粉末。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 23D (Industrial Use) | PQ Corporation - PQ公司 | GASIL® 23D是一种合成的无定形二氧化硅。它可以作为消光剂用于印刷油墨、罩印清漆、皮革和木器涂料。它也可以作为增稠剂、粘度调节剂和抗粘连剂，用于高透度聚丙烯和聚氯乙烯薄膜。GASIL® 23D是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 23F | PQ Corporation - PQ公司 | GASIL® 23F是一种合成的无定形二氧化硅。它可作为通用型微粉化二氧化硅用于消光水性体系，包括皮革涂饰剂、增稠剂、承载和抗结块。它也可以作为油墨吸附颜料用于喷墨油墨。 GASIL® 23F是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 35M W | PQ Corporation - PQ公司 | Gasil® 35M W is a synthetic amorphous silica. It is used as a general purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers, and drafting film. It is also used as ...展开 Gasil® 35M W is a synthetic amorphous silica. It is used as a general purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers, and drafting film. It is also used as an anti-plate-out additive for calendered PVC and as an ink adsorbing pigment for inkjet. Gasil® 35M W is a fine, light powder and care should be taken to avoid inhaling it. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. 收起 | Request Sample |
| Gasil® 937 | PQ Corporation - PQ公司 | GASIL ® 937是一种合成的无定形二氧化硅。它可作为一种通用型消光剂，可理想的用于高浓度消光膏。它广泛适用于工业和装饰木器涂料和金属涂料。GASIL® 937是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® EBN | PQ Corporation - PQ公司 | GASIL ® EBN是一种合成无定形二氧化硅。它是专为辐射固化涂料、塑料溶胶和高膜厚涂料设计的消光粉。GASIL® EBN是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® GM2 | PQ Corporation - PQ公司 | GASIL ® GM2是一种合成无定形二氧化硅。它经特别设计，结合了消光剂和抗结块剂功能，可用于粉末涂料。其结构和颗粒大小使它非常适合于承受混合/干混带来的机械破坏力，流变流出的影响最小。它被用作抛光助剂，但是，它也适合于食品应用。 GASIL® GM2是一种细而轻的粉末。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP210 | PQ Corporation - PQ公司 | GASIL ® HP210是一种合成的无定形二氧化硅。这是一个高效的蜡处理消光剂，可搅拌加入。本产品的中等粒径意味着它是一个非常通用的消光剂适合许多表面涂料。GASIL® HP210是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP220 | PQ Corporation - PQ公司 | Gasil® HP220 is a synthetic amorphous silica. It is a high efficiency, easy dispersible matting agent with controlled particle size. It is suitable for matting of both clear and pigmented coatings including wood finishes, alkyd paints and varnishes, and c...展开 Gasil® HP220 is a synthetic amorphous silica. It is a high efficiency, easy dispersible matting agent with controlled particle size. It is suitable for matting of both clear and pigmented coatings including wood finishes, alkyd paints and varnishes, and coil and can coatings. Gasil® HP220 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. 收起 | Request Sample |
| Gasil® HP230 | PQ Corporation - PQ公司 | GASIL ® HP230是一种合成的无定形二氧化硅。它作为消光剂用于薄涂工业涂料、油墨和高透明度的水性涂料。 GASIL® HP230是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP240 | PQ Corporation - PQ公司 | GASIL ® HP240是一种合成的无定形二氧化硅。它是一种通用型消光剂，适用于光滑木器漆、卷材和罐头涂料，以及辐射固化体系。GASIL® HP240是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP255 | PQ Corporation - PQ公司 | GASIL ® HP255是一种合成的无定形二氧化硅。本产品粒径小，具有高消光效率，适合硅涂卷材涂料和油墨配方。GASIL® HP255是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP260 | PQ Corporation - PQ公司 | GASIL ® HP260是一种合成的无定形二氧化硅。本品是一种高效，通用的，易分散的消光剂。它适用于多种溶剂型体系，包括金属涂料、木器漆和织物涂料。GASIL® HP260是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP270 | PQ Corporation - PQ公司 | GASIL ® HP270是一种合成的无定形二氧化硅。本品是一种高效，易分散的消光剂，具有良好的粒度控制。它适合用于高固含体系，以及卷材和罐头涂料。它也可以用来作为油墨吸附颜料用于喷墨涂层。GASIL® HP270是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP280 | PQ Corporation - PQ公司 | GASIL ® HP280是一种合成的无定形二氧化硅。本品是一种高效，易分散的消光剂，它提供了一个低光泽比。它适合用于高固含和酸催化的卷材体系的消光。它也可以作为油墨吸附颜料用于喷墨涂层。GASIL® HP280是一种细而轻的粉末，应注意避免吸入。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP290 | PQ Corporation - PQ公司 | GASIL ® HP290是一种合成的无定形二氧化硅。它是一种高效，易分散的消光剂，它提供了一个低光泽比。它适合用于高固含和酸催化的卷材体系的消光。它也可以作为油墨吸附颜料的喷墨涂层。GASIL® HP290是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP335 | PQ Corporation - PQ公司 | Gasil® HP335 features a small particle size that is carefully controlled combined with a high internal pore volume. In addition Gasil® HP335 has high purity and specially designed organic surface treatment that makes it the product of choice for many appl...展开 Gasil® HP335 features a small particle size that is carefully controlled combined with a high internal pore volume. In addition Gasil® HP335 has high purity and specially designed organic surface treatment that makes it the product of choice for many applications. 收起 | Request Sample |
| Gasil® HP33C | PQ Corporation - PQ公司 | Gasil® HP33C features a very small particle size that is carefully controlled combined with a high internal pore volume and high purity. Gasil® HP33C with its high matting efficiency and transparency is the product of choice for the formulation of inks an...展开 Gasil® HP33C features a very small particle size that is carefully controlled combined with a high internal pore volume and high purity. Gasil® HP33C with its high matting efficiency and transparency is the product of choice for the formulation of inks and overprint varnishes. 收起 | Request Sample |
| Gasil® HP340M | PQ Corporation - PQ公司 | GASIL ® HP340M是一种合成的无定形二氧化硅。本品是一种高效的蜡处理消光剂，具有优良的分散性和悬浮性能。虽然它在工业木器涂料中特别适用，它也是一个非常好的通用型消光剂。 GASIL® HP340M是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP380 | PQ Corporation - PQ公司 | Gasil® HP380是一种人工合成的非定晶硅。它在标准（紫外线，高固体含量，水基）涂料中作为经处理氧化硅的消光剂。它主要的特点包括消光率高，透明且具有耐磨性。 | Request Sample |
| Gasil® HP39 | PQ Corporation - PQ公司 | GASIL ® HP39是一种合成的无定形二氧化硅。它是一个大粒径的消光剂，设计用于无溶剂辐射固化涂料、高固含系统以及厚膜涂料。它也可以作为油墨吸附颜料用于喷墨涂层。 GASIL® HP39是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP395 | PQ Corporation - PQ公司 | GASIL ® HP395是一种合成的无定形二氧化硅。本产品是一种容易润湿/分散的大粒径的消光剂，可用于水性和溶剂型体系。它是作为壁纸超级涂料、屋顶瓦乳液涂料、百叶窗涂料的消光。它也被用于乳胶漆的光泽控制，作为一种有效的防滑剂，用于涂料，以及作为墨水吸附颜料用于喷墨涂层。GASIL® HP395既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP560 | PQ Corporation - PQ公司 | GASIL ® HP560是一种合成的无定形二氧化硅。本品适合用于木器涂料，提供高消光效率和出色的透明性和分散性。GASIL® HP560是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP576 | PQ Corporation - PQ公司 | Gasil® HP576 is a very high efficiency wax treated silica matting agent for UV curable coatings. | Request Sample |
| Gasil® HP710 | PQ Corporation - PQ公司 | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | Request Sample |
| Gasil® HP860 | PQ Corporation - PQ公司 | GASIL ® HP860是一种合成的无定形二氧化硅。本品适合用于光滑的木器漆消光。它具有出色的手感和分散性。其有机处理极其耐溶剂剥离。 GASIL® HP860是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP880 | PQ Corporation - PQ公司 | GASIL ® HP880是一种合成的无定形二氧化硅。它是一种高效，易分散的消光剂，具有良好的粒度控制。它同时适用于清漆和色漆，包括装饰涂料、木器漆，以及卷材和罐头涂料。用于100％固含UV固化涂料也具有良好的性能。 GASIL® HP880是一种细而轻的粉末，应注意避免吸入。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HS104 | PQ Corporation - PQ公司 | Gasil® HS104 is a synthetic amorphous silica. This fine particle size silica is used as a matting agent for leather finishes, as well as a high-efficiency matting agent for water-based and solvent-based wood lacquers. Gasil® HS104 combines excellent weigh...展开 Gasil® HS104 is a synthetic amorphous silica. This fine particle size silica is used as a matting agent for leather finishes, as well as a high-efficiency matting agent for water-based and solvent-based wood lacquers. Gasil® HS104 combines excellent weight effectiveness with good dispersibility in most applications. 收起 | Request Sample |
| Gasil® HS106 | PQ Corporation - PQ公司 | Gasil® HS106 is a synthetic amorphous silica. It is a general purpose silica matting agent for use in industrial coatings, and is highly efficient in coil coatings and wood lacquers. Gasil® HS106 combines excellent weight effectiveness with good dispersib...展开 Gasil® HS106 is a synthetic amorphous silica. It is a general purpose silica matting agent for use in industrial coatings, and is highly efficient in coil coatings and wood lacquers. Gasil® HS106 combines excellent weight effectiveness with good dispersibility in most applications. 收起 | Request Sample |
| Gasil® HS110 | PQ Corporation - PQ公司 | Gasil® HS110 is a synthetic amorphous silica product. It is a high efficiency silica matting agent for use in decorative paints, general industrial coatings, and coil coatings. | Request Sample |
| Gasil® HY500 | PQ Corporation - PQ公司 | Gasil® HY500 is a fine particle size silica matting agent for use in Industrial Coatings. High Efficiency in Waterborne formulations. | Request Sample |
| Gasil® HY600 | PQ Corporation - PQ公司 | Gasil® HY600 is a silica matting agent for use in Industrial Coatings. High Efficiency in Waterborne formulations. | Request Sample |
| Gasil® IJ37 | PQ Corporation - PQ公司 | Gasil® IJ37是一种有机处理的硅胶，在水基木地板和辐射固化涂料中用作有效的消光剂。它提供出色的消光效率，并将对透明度和力学薄膜性质的影响最小化。 | Request Sample |
| Gasil® P-10W | PQ Corporation - PQ公司 | GASIL ®P -10W是一种合成的无定形二氧化硅。它是一种大粒度的消光剂，设计用于水性漆。它也可以作为油墨吸附颜料用于喷墨涂层。 GASIL® P- 10W是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® P-28 | PQ Corporation - PQ公司 | Gasil® P-28 is a synthetic amorphous silica. It is used as a synthetic silica for use in coatings for thermal paper. Gasil® P-28 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust v...展开 Gasil® P-28 is a synthetic amorphous silica. It is used as a synthetic silica for use in coatings for thermal paper. Gasil® P-28 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. 收起 | Request Sample |
| Gasil® UV55C | PQ Corporation - PQ公司 | GASIL ® UV55C是一种合成的无定形二氧化硅。本品是一种消光剂，可用于UV固化涂料。它广泛适用于UV固化木器涂料、包装涂料和工业涂料。它可理想的应用于需要低粘度的场合。GASIL® UV55C是一种细而轻的粉末，应注意避免吸入。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® UV70C | PQ Corporation - PQ公司 | GASIL ® UV70C是一种合成的无定形二氧化硅。这是一个高效蜡处理消光剂。中等粒径，表面经处理，易于分散，可通用于UV固化体系。GASIL® UV70C是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® WP100 | PQ Corporation - PQ公司 | Gasil® WP100 is a high performance Silica Hydrogel designed to provide increased scrub and burnishing resistance in water based paints. Gasil® WP100 - helps to increase water resistance of latex and silicate coatings. Also used to increase the ratio in Al...展开 Gasil® WP100 is a high performance Silica Hydrogel designed to provide increased scrub and burnishing resistance in water based paints. Gasil® WP100 - helps to increase water resistance of latex and silicate coatings. Also used to increase the ratio in Alkali Silicate Zinc Rich Primers. 收起 | Request Sample |
| Gasil® XE3100 | PQ Corporation - PQ公司 | Gasil® XE3100 is a synthetic amorphous silica. It is used as an ultra high efficient silica matting agent. This product is suitable for wood, coil, and general industrial coatings. It performs well in waterbased formulations. | Request Sample |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| Isobutanol | Penpet Petrochemical Trading GmbH | Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation...展开 Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation of oil residue. Isobutanol can also be used as a solvent in paint and varnish removers. 收起 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展开 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isophthalic Acid | Penpet Petrochemical Trading GmbH | Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166....展开 Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166.14 and its melting point starts between 345 and 348°C. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展开 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Kasil® 1 | PQ Corporation - PQ公司 | Kasil® 1 is a potassium silicate that provides good adhesion, good binding power, and corrosion inhibition. | Request Sample |
| Kasil® 6 | PQ Corporation - PQ公司 | Kasil® 6 is a potassium silicate that provides good adhesion, good binding power, and corrosion inhibition. | Request Sample |
| Maleic Anhydride, Briquets | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boil...展开 Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Flakes | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boilin...展开 Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Liquid | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point i...展开 Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Pastilles | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boi...展开 Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Methylhexahydrophthalic Anhydride | Penpet Petrochemical Trading GmbH | Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also k...展开 Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also known as hexahydromethylphthalic anhydride. 收起 | |
| n-Butanol | Penpet Petrochemical Trading GmbH | N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbo...展开 N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbon linear hydrocarbon with a hydroxy group at position 1. It is miscible in common solvents but is only slightly soluble in water. 收起 | |
| Neopentyl Glycol (NPG), Flakes | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Flakes, in the form of a clear flake, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Neopentyl Glycol (NPG), Solution | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Solution, in the form of a 90% solution, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Pentaerythritol | Penpet Petrochemical Trading GmbH | Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a densi...展开 Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a density of 1.396 g/cm3. Its melting point is defined at 260.5°C and its boiling point is at 276°C. 收起 | |
| Phthalic Anhydride (PA) | Penpet Petrochemical Trading GmbH | Phthalic Anhydride (PA) in the form of a colourless flake, is an organic compound that can be used in surface coatings. This product is an important raw material that can often serve as a plasticizer in plastics, dyestuffs, and synthetic resins. | |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...展开 Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 收起 | |
| Picassian® AC-111 | Stahl Polymers | Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起 | |
| Picassian® AC-122 | Stahl Polymers | Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...展开 Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-126 | Stahl Polymers | Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...展开 Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. 收起 | |
| Picassian® AC-169 | Stahl Polymers | Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...展开 Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...展开 Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 收起 | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...展开 Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 收起 | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...展开 Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. 收起 | |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...展开 Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. 收起 | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起 | |
| Picassian® AC-222 | Stahl Polymers | Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This pro...展开 Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This product has good pigment wetting attributes, high pigment loading capacity attributes, is quick to sand, and is quick to dry. 收起 | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...展开 Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 收起 | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...展开 Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. 收起 | |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...展开 Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. 收起 | |
| Picassian® PU-508 | Stahl Polymers | Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility ...展开 Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility properties, has good heat seal resistance properties, and has good adhesion on aluminium foil. 收起 | |
| Picassian® PU-518 | Stahl Polymers | Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...展开 Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. 收起 | |
| Picassian® PU-546 | Stahl Polymers | Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol ri...展开 Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol rich mixtures, and has solvent retention values that are lower than those of conventional inks. 收起 | |
| Picassian® PU-548 | Stahl Polymers | Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...展开 Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. 收起 | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...展开 Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. 收起 | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...展开 Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. 收起 | |
| Picassian® PU-635 | Stahl Polymers | Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility prop...展开 Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility properties, is crosslinkable at room temperature, and is highly compatible with other binders. 收起 | |
| Picassian® PU-648 | Stahl Polymers | Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good co...展开 Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good coverage properties, good filling properties, and maintains flexibility at negative 30 degrees Celsius. 收起 | |
| Picassian® XL-701 | Stahl Polymers | Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...展开 Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. 收起 | |
| Picassian® XL-702 | Stahl Polymers | Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formula...展开 Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. 收起 | |
| Picassian® XL-725 | Stahl Polymers | Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...展开 Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起 | |
| Picassian® XL-732 | Stahl Polymers | Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...展开 Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起 | |
| Relca® HY-460 | Stahl Polymers | Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This produ...展开 Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This product has fast drying properties, good adhesion properties, good shear stability properties, good pigment wetting properties, and is solvent free. 收起 | |
| Relca® HY-625 | Stahl Polymers | Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resi...展开 Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resistance properties, good hydrolysis resistance properties, high hardness properties, and good adhesion properties with wood. 收起 | |
| Relca® PU-406 | Stahl Polymers | Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties,...展开 Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties, good chemical resistance properties, good UV resistance properties, good heat resistance properties, and good adhesion properties. 收起 | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...展开 Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. 收起 | |
| Relca® PU-476 | Stahl Polymers | Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, go...展开 Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, good adhesion properties, good chemical resistance properties, good pigment wetting properties, good scratch resistance properties, and good black heel mar resistance properties. 收起 | |
| Relca® PU-477 | Stahl Polymers | Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resi...展开 Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resistance properties, good chemical resistance properties, good UV resistance properties, good hydrolysis resistance properties, and good adhesion properties with PVC, PUR, and pretreated TPO. 收起 |
