| A-25 Anatase Pigment | CPM Industries, Inc. | A-25 Anatase Pigment is an anatase titanium dioxide pigment that is easily dispersed in aqueous applications and available in powder or granular form. This product is ideal for application in chalking paints, concrete curing compounds, and electro-ceramic...展开 A-25 Anatase Pigment is an anatase titanium dioxide pigment that is easily dispersed in aqueous applications and available in powder or granular form. This product is ideal for application in chalking paints, concrete curing compounds, and electro-ceramics. It has a purity of 98% min. and a mean particle size in the range of 0.25 to 0.30 microns. 收起 | |
| A-300F Anatase | CPM Industries, Inc. | A-300F Anatase is ideal for application in polyamide, polyester, and cellulose-viscose fibers. This product has a purity of 98% min. and a particle size distribution around an average of 0.3 microns specifically designed for use in synthetic fiber deluste...展开 A-300F Anatase is ideal for application in polyamide, polyester, and cellulose-viscose fibers. This product has a purity of 98% min. and a particle size distribution around an average of 0.3 microns specifically designed for use in synthetic fiber delustering. 收起 | |
| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Aspanger ASPOLIT F100 | Aspanger | Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...展开 Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F100 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F100 has a Spec. surface (m²/g) of 4.5, an a oil absorption (g/100 g) of 21, and a loose bulk density (g/l) of 630. 收起 | |
| Aspanger ASPOLIT F30 | Aspanger | Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...展开 Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F30 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F30 has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 400. 收起 | |
| Aspanger ASPOLIT F40 | Aspanger | Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...展开 Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F40 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F40 has a Spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 35, and a loose bulk density (g/l) of 450. 收起 | |
| Aspanger ASPOLIT F70 | Aspanger | Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...展开 Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F70 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F70 has a Spec. surface (m²/g) of 6, an a oil absorption (g/100 g) of 27, and a loose bulk density (g/l) of 540. 收起 | |
| Aspanger ASPOLIT G200 | Aspanger | Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...展开 Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G200 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G200 has a Spec. surface (m²/g) of 3, an a oil absorption (g/100 g) of 16, and a loose bulk density (g/l) of 740. 收起 | |
| Aspanger ASPOLIT G400 | Aspanger | Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...展开 Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G400 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G400 has a spec. surface (m²/g) of 1-2, an a oil absorption (g/100 g) of 12, and a loose bulk density (g/l) of 885. 收起 | |
| Aspanger Mica 900 | Aspanger | Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves ma...展开 Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica 900 has a loose bulk density (g/l) of 350. 收起 | |
| Aspanger Mica F | Aspanger | Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F impro...展开 Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica F has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 34, and a loose bulk density (g/l) of 440. 收起 | |
| Aspanger Mica G | Aspanger | Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G impro...展开 Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica G has a spec. surface (m²/g) of 8, an a oil absorption (g/100 g) of 28, and a loose bulk density (g/l) of 490. 收起 | |
| Aspanger Mica N | Aspanger | Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N impro...展开 Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica N has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 31, and a loose bulk density (g/l) of 460. 收起 | |
| Aspanger Mica SFG20 | Aspanger | Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG2...展开 Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG20 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG20 has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 41, and a loose bulk density (g/l) of 370. 收起 | |
| Aspanger Mica SFG40 | Aspanger | Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...展开 Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG40 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG40 has a spec. surface (m²/g) of 17, an a oil absorption (g/100 g) of 42, and a loose bulk density (g/l) of 290. 收起 | |
| Aspanger Mica SFG70 | Aspanger | Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...展开 Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG70 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG70 has a spec. surface (m²/g) of 21, an a oil absorption (g/100 g) of 43, and a loose bulk density (g/l) of 200. 收起 | |
| Aspanger Mica SG | Aspanger | Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG imp...展开 Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SG has a spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 25, and a loose bulk density (g/l) of 500. 收起 | |
| Aspanger Mica TF | Aspanger | Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves mate...展开 Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TF has a Spec. surface (m²/g) of 9.5, an a oil absorption (g/100 g) of 52, and a loose bulk density (g/l) of 370. 收起 | |
| Aspanger Mica TG | Aspanger | Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves mate...展开 Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TG has a spec. surface (m²/g) of 4.0, an a oil absorption (g/100 g) of 46, and a loose bulk density (g/l) of 350. 收起 | |
| Aspanger Mica TM | Aspanger | Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves mate...展开 Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TM has a spec. surface (m²/g) of 5.5, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 360. 收起 | |
| Aspanger Mica TX | Aspanger | Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves mate...展开 Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TX has a spec. surface (m²/g) of 1.2 and a loose bulk density (g/l) of 320. 收起 | |
| Aspanger Mica TXL | Aspanger | Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves ma...展开 Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TXL has a spec. surface (m²/g) of 3.3 and a loose bulk density (g/l) of 330. 收起 | |
| CA-106 TiO2 | Boom Industry (SH) Co., Ltd. | CA-106 TiO2 is an uncoated anatase titanium dioxide pigment derived from a sulfuric acid process. This product has a blue hue that shows more after pigmentation, additional brightness, high chromatic of heavy metal, and good water dispersion. It can be ap...展开 CA-106 TiO2 is an uncoated anatase titanium dioxide pigment derived from a sulfuric acid process. This product has a blue hue that shows more after pigmentation, additional brightness, high chromatic of heavy metal, and good water dispersion. It can be applied to carpentry, signpost and indoor metope latex paint. 收起 | |
| CR-330 TiO2 | Boom Industry (SH) Co., Ltd. | CR-330 TiO2 is a rutile titanium dioxide pigment absent of organic surface processed coating treatment. This product is noted for good hiding power, dispersion and stability, and it can be used in coatings. | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Iron Oxide Black | Tongling Rely Technology Co., Ltd. | Iron Oxide Black is an iron oxide pigment that contains saturated blue light black ink with high hiding power, tinting strength, alkali resistance and lightfastness. This product is often used in paint applications. | |
| Iron Oxide Blue | Tongling Rely Technology Co., Ltd. | Iron Oxide Blue is a dark and light blue pigment powder that has an oil absorption of 15-30% and a moisture content of 1%. This product is used for strong and bright coloring in paint and ink applications. | |
| Iron Oxide Brown | Tongling Rely Technology Co., Ltd. | Iron Oxide Brown is an iron oxide pigment with strong adaptability to other iron oxide pigments. This product is used for coloring in paint applications. | |
| Iron Oxide Green | Tongling Rely Technology Co., Ltd. | Iron Oxide Green is a green iron oxide organic pigment made by coupling a variety of additives composite pigments. This product provides strong and bright coloring to colored paint applications. | |
| Iron Oxide Red | Tongling Rely Technology Co., Ltd. | Iron Oxide Red is a red iron oxide and inorganic color pigment that contains high hiding power, strong tinting strength, good dispersibility, light resistance and weather resistance. This product is commonly used in paint applications. | |
| Iron Oxide Yellow | Tongling Rely Technology Co., Ltd. | Iron Oxide Yellow is an iron oxide pigment of relatively stable chemical properties of alkaline oxides. This product provides a pure and bright yellow color of iron with good weather resistance and hiding power. It is commonly used in ink applications. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| R-1 Rutile Powder | CPM Industries, Inc. | R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceram...展开 R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceramics, specialty glass, fiberglass, engineered ceramics, and coated welding rods. 收起 | |
| R-500 Rutile Pigment | CPM Industries, Inc. | R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, ...展开 R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, and powder coatings. It is a multipurpose pigment with a 98% minimum TiO2 content and no surface treatment. 收起 | |
| R-501 Rutile Pigment | CPM Industries, Inc. | R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment t...展开 R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in solvent based systems. 收起 | |
| R-502 Rutile Pigment | CPM Industries, Inc. | R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface ...展开 R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in water based systems. 收起 | |
| R-601 Rutile Pigment | CPM Industries, Inc. | R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorgani...展开 R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorganic and amphiphilic organic surface treatments. 收起 | |
| R-602 Rutile Pigment | CPM Industries, Inc. | R-602 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in water based paints. This product contains 93% minimum TiO2 with silica and alumina inorganic and hydrophilic organic surface treatments. | |
| R-606 Rutile Universal Pigment | CPM Industries, Inc. | R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for s...展开 R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for superior durability and stability, high gloss and opacity, and excellent dispersibility. 收起 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展开 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 |
