| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Hauthane HD-2101 | Hauthaway | Hauthane HD-2101 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2101 can be used as a sole vehicle or blended with harder polyuretha...展开 Hauthane HD-2101 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2101 can be used as a sole vehicle or blended with harder polyurethane dispersions or acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2107 | Hauthaway | Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2107 ca...展开 Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2107 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2113 | Hauthaway | Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without t...展开 Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend. HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod. 收起 | |
| Hauthane HD-2117 | Hauthaway | Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concret...展开 Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. HD-2117 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2120 | Hauthaway | Hauthane HD-2120 is a very hard, aliphatic, polyester polyurethane dispersion. It was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-compon...展开 Hauthane HD-2120 is a very hard, aliphatic, polyester polyurethane dispersion. It was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. HD-2120 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2125 | Hauthaway | Hauthane HD-2125 is a hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, meta...展开 Hauthane HD-2125 is a hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. HD-2125 may be used as a sole vehicle or blended with acrylic emulsions for spray or brush applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2139 | Hauthaway | Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating du...展开 Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods. 收起 | |
| Hauthane HD-2142 | Hauthaway | Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant fi...展开 Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. HD-2142 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods. 收起 | |
| Hauthane HD-2209 | Hauthaway | Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates...展开 Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. HD-2209 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-2334 | Hauthaway | Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...展开 Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. 收起 | |
| Hauthane HD-2501 | Hauthaway | Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for...展开 Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane HD-2503 | Hauthaway | Hauthane HD-2503 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradati...展开 Hauthane HD-2503 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. HD-2503 is ideally suited for exterior applications where film durability and longevity are important considerations. HD-2503 may be formulated into coatings applied by spray, brush or pad applicator. It can be used as a sole vehicle or blended with acrylic emulsions. The rheology may be modified with associative thickeners. 收起 | |
| Hauthane HD-2504 | Hauthaway | Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited ...展开 Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited for exterior applications where film durability and longevity are important considerations. HD-2504 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application viscosity. 收起 | |
| Hauthane HD-2602 | Hauthaway | Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silic...展开 Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-3011 | Hauthaway | Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prev...展开 Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-4664 | Hauthaway | Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart grea...展开 Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. HD-4664 can be used as a sole vehicle or blended with acrylic emulsions for spray or pad bath applications. Solids can be reduced with water to optimize dry coating weight. This product may also be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane HD-4669 | Hauthaway | Hauthane HD-4669 is a hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4669 can be used as a sole vehicle or blende...展开 Hauthane HD-4669 is a hard, co-solvent free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4669 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-4675 | Hauthaway | Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended wi...展开 Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane HD-5002 | Hauthaway | Hauthane HD-5002 is a cost effective, aliphatic polyurethane/acrylic hybrid dispersion with an exceptional balance of properties. It was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyren...展开 Hauthane HD-5002 is a cost effective, aliphatic polyurethane/acrylic hybrid dispersion with an exceptional balance of properties. It was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyrene where abrasion and chemical resistance properties are required. HD-5002 can be used as a sole vehicle for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane HD-6000 | Hauthaway | Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The pr...展开 Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6000 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane HD-6002 | Hauthaway | Hauthane HD-6002 is a polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The prod...展开 Hauthane HD-6002 is a polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6002 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane L-2020 | Hauthaway | Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point propert...展开 Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. L-2020 may be spray or pad bathed as supplied. It may be thickened for knife- over-roll or similar methods. 收起 | |
| Hauthane L-2357 | Hauthaway | Hauthane L-2357 is a branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. It was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but t...展开 Hauthane L-2357 is a branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. It was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable. L-2357 can be used as supplied or blended with acrylic emulsions for spray or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-2728 | Hauthaway | Hauthane L-2728 is an experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion. It was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO mak...展开 Hauthane L-2728 is an experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion. It was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO makes it the ideal candidate for sheet goods used in upholstered furniture, canopies, signs and other fabricated articles. L-2728 may be formulated for spray or rotogravure applications. Viscosity modifications may be made with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-2857 | Hauthaway | Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugiti...展开 Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. L-2857 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2875 | Hauthaway | Hauthane L-2875 is a hard, NMP-free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2875 can be used as supplied or blended with acryli...展开 Hauthane L-2875 is a hard, NMP-free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2875 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-2877 | Hauthaway | Hauthane L-2877 is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, pla...展开 Hauthane L-2877 is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2877 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2882 | Hauthaway | Hauthane L-2882 is a very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. It was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2...展开 Hauthane L-2882 is a very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion. It was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components. L-2882 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2883 | Hauthaway | Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X ...展开 Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D 401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. L-2883 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane L-2892 | Hauthaway | Hauthane L-2892 is extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, ...展开 Hauthane L-2892 is extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. L-2892 can be used as a sole resin vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2896 | Hauthaway | Hauthane L-2896 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradatio...展开 Hauthane L-2896 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-2896 is ideally suited for exterior applications where film durability and longevity are important considerations. L-2896 may be formulated into coatings applied by spray, brush or pad applicator. It can be used as a sole vehicle or blended with acrylic emulsions. The rheology may be modified with associative thickeners. 收起 | |
| Hauthane L-2897 | Hauthaway | Hauthane L-2897 is a hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topco...展开 Hauthane L-2897 is a hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics. L-2897 may be used as a sole vehicle or blended with acrylic emulsions for spray or brush applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2942 | Hauthaway | Hauthane L-2942 is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-,...展开 Hauthane L-2942 is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. L-2942 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods. 收起 | |
| Hauthane L-2969 | Hauthaway | Hauthane L-2969 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dis...展开 Hauthane L-2969 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dispersions to impart flexibility without adversely effecting chemical resistance. L-2969 can be used as a sole vehicle or blended with harder polyurethane dispersions or acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-2996 | Hauthaway | Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, ch...展开 Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. L-2996 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. 收起 | |
| Hauthane L-3033 | Hauthaway | Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as wel...展开 Hauthane L-3033 is a formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry). It is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces. L-3033 does not have defoamer or wetting agent, allowing the formulator flexibility of selection for his specific application. May be applied by rotogravure, wire wound rod and spray. 收起 | |
| Hauthane L-3040 | Hauthaway | Hauthane L-3040 is an NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible ...展开 Hauthane L-3040 is an NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance. L-3040 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3101 | Hauthaway | Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 ...展开 Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 is ideally suited for exterior applications where film durability and longevity are important considerations. L-3101 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application rheology. 收起 | |
| Hauthane L-3121 | Hauthaway | Hauthane L-3121 is a soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-3121 can be used as a sole vehicle or blended with acrylic emuls...展开 Hauthane L-3121 is a soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-3121 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-3155 | Hauthaway | Hauthane L-3155 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-...展开 Hauthane L-3155 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. L-3155 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3225 | Hauthaway | Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. ...展开 Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3225 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. 收起 | |
| Hauthane L-3310 | Hauthaway | Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrat...展开 Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrates, including concrete, metal, plastic and wood. L-3310 is ideal for use in applications where excellent flow and leveling properties, and high levels of water- and chemical-resistance are required. L-3310 can be used as a sole vehicle or blended with acrylic emulsions for spray, brush or roller applications. Rheology modifications can be made with associative thickeners. 收起 | |
| Hauthane L-3369 | Hauthaway | Hauthane L-3369 is a partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, inclu...展开 Hauthane L-3369 is a partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products. L-3369 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3385 | Hauthaway | Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-...展开 Hauthane L-3385 is a self-crosslinking, aliphatic, water-based polyurethane dispersion designed for use in high performance concrete and wood floor coatings. It employs a unique air-dry, self-crosslinking mechanism to impart chemical-resistance, abrasion-resistance and mar-resistance properties which equal or exceed those of two-component, water-based floor coating systems currently used in the market. L-3385 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Hauthane L-3415 | Hauthaway | Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include auto...展开 Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. L-3415 may be applied by spray or gravure methods. Films must be dried completely before UV energy cure. 收起 | |
| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...展开 Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. |
