| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Basic Zinc Chromate 233 | WPC Technologies, Inc. | Basic Zinc Chromate 233 is a yellow-colored anti-corrosive pigment in a powder form. This product has an oil absorption of 22-38 lbs/100lbs and a specific gravity of 3.85. It is most commonly used in solvent and water-based epoxy formulation applications. | |
| BENTOBRITE® 770 | American Colloid Company | BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and othe...展开 BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and other industrial applications. 收起 | |
| BENTOBRITE® KB-325 | American Colloid Company | BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used ...展开 BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used as a suspending agent, gellant, and binder for use in household products, automotive products and paints, aerosols, enamels and other industrial specialty applications where high solid levels and low viscosity are desired. 收起 | |
| Calcium Chromate 015 | WPC Technologies, Inc. | Calcium Chromate 015 is a yellow-colored anti-corrosive pigment in a free-flowing powder form. This product has an oil absorption of 14-21 lbs/100lbs and a specific gravity of 2.94. It is most commonly used in solvent-based primer applications. | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| Corrosperse 176A-100 70% | WPC Technologies, Inc. | Corrosperse 176A-100 70% is a 70% yellow-colored paste dispersion of Strontium Chromate in Aromatic 100. This product has a total solids content of 71-76% and a specific gravity of 1.8-2.1 g/cm3. It is most commonly used as a pigment in solvent-borne prim...展开 Corrosperse 176A-100 70% is a 70% yellow-colored paste dispersion of Strontium Chromate in Aromatic 100. This product has a total solids content of 71-76% and a specific gravity of 1.8-2.1 g/cm3. It is most commonly used as a pigment in solvent-borne primer applications. 收起 | |
| Corrosperse 176C | WPC Technologies, Inc. | Corrosperse 176C is a yellow-colored paste that is a 75% dispersion of Strontium Chromate in cyclohexanone. This product has a total solids content of 76-80% and a specific gravity of 2.0-2.2 g/cm3. It is most commonly used as a pigment in solvent-borne c...展开 Corrosperse 176C is a yellow-colored paste that is a 75% dispersion of Strontium Chromate in cyclohexanone. This product has a total solids content of 76-80% and a specific gravity of 2.0-2.2 g/cm3. It is most commonly used as a pigment in solvent-borne coating applications. 收起 | |
| Corrosperse 176E | WPC Technologies, Inc. | Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-bor...展开 Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-borne primer applications. 收起 | |
| Corrosperse 176M | WPC Technologies, Inc. | Corrosperse 176M is a yellow paste that is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. This product has a total solids content of 69-74% and a specific gravity of 1.85-1.95 g/cm3. It is most commonly used as a pigment in solvent-borne pr...展开 Corrosperse 176M is a yellow paste that is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. This product has a total solids content of 69-74% and a specific gravity of 1.85-1.95 g/cm3. It is most commonly used as a pigment in solvent-borne primer applications. 收起 | |
| Corrostain® 228 | WPC Technologies, Inc. | Corrostain® 228 is a corrosion and tannin stain inhibiting pigment that is in a white powder form. This product has an oil absorption of 22-31 lbs/100lbs and a specific gravity of 3.10. It is most commonly used to provide good stability and performance in...展开 Corrostain® 228 is a corrosion and tannin stain inhibiting pigment that is in a white powder form. This product has an oil absorption of 22-31 lbs/100lbs and a specific gravity of 3.10. It is most commonly used to provide good stability and performance in solvent and water-based coating systems. 收起 | |
| ECOPOL-518P | Economy Polymers & Chemicals | ECOPOL-518P is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP18S | Economy Polymers & Chemicals | ECOPOL-PP18S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP400S | Economy Polymers & Chemicals | ECOPOL-PP400S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP518S | Economy Polymers & Chemicals | ECOPOL-PP518S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| HECTABRITE® DP | American Colloid Company | HECTABRITE® DP is a highly purified white sodium hectorite that is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It exhibits a high degree of shear thinning a...展开 HECTABRITE® DP is a highly purified white sodium hectorite that is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It exhibits a high degree of shear thinning and can be used as a binder and plasticizer to ease extrusion and increase green strength in paints, ceramic glazes, and in other applications where a high degree of anti-settling and anti-sag are required. 收起 | |
| HECTALITE® 200 | American Colloid Company | HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheolo...展开 HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheology and stability, and is typically used in architectural paints, ceramics, and adhesives. 收起 | |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| Hybricor™ 204 | WPC Technologies, Inc. | Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment that is in a pale yellow powder form. This product has an oil absorption of 25-35 lbs/100lbs and a specific gravity of 2.55-2.70 g/cm3. It is most commonly used in aerospace primer ...展开 Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment that is in a pale yellow powder form. This product has an oil absorption of 25-35 lbs/100lbs and a specific gravity of 2.55-2.70 g/cm3. It is most commonly used in aerospace primer applications. 收起 | |
| Hybricor™ 204S | WPC Technologies, Inc. | Hybricor™ 204S is a pigment-grade hybrid corrosion inhibitor that is in a pale yellow powder form. This product has an oil absorption of 25-36 lbs/100lbs and a specific gravity of 2.4-2.7 g/cm3. It is most commonly used in cast and structural aluminum pro...展开 Hybricor™ 204S is a pigment-grade hybrid corrosion inhibitor that is in a pale yellow powder form. This product has an oil absorption of 25-36 lbs/100lbs and a specific gravity of 2.4-2.7 g/cm3. It is most commonly used in cast and structural aluminum protection primer applications. 收起 | |
| Hybricor™ 206 | WPC Technologies, Inc. | Hybricor™ 206 is an organic/inorganic anti-corrosive pigment that is in a white powder form. This product has an oil absorption maximum of 65 lbs/100lbs and a specific gravity of 2.25-2.35 g/cm3. It is most commonly used in solvent and water-based coatin...展开 Hybricor™ 206 is an organic/inorganic anti-corrosive pigment that is in a white powder form. This product has an oil absorption maximum of 65 lbs/100lbs and a specific gravity of 2.25-2.35 g/cm3. It is most commonly used in solvent and water-based coating systems. 收起 | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| MAGNABRITE® T | American Colloid Company | MAGNABRITE® T is a highly-purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. This product is used whenever an inorganic, thixotropic material is desired to disperse pigments, retard settling, impart body or stabi...展开 MAGNABRITE® T is a highly-purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. This product is used whenever an inorganic, thixotropic material is desired to disperse pigments, retard settling, impart body or stabilize emulsions. It is a nonmigrating binder which delivers high yield values that enable the successful suspension of high-density pigments and particles. It can find applications in paints and ceramics. 收起 | |
| Maleic Anhydride | Yixing Qiancheng Bio-Engineering Co., Ltd. | Maleic Anhydride is a white flaky crystalline granule with a heavy irritant odor that is soluble in alcohol, ether, acetone, water and maelic acid. This product is designed for use in the production of unsaturated polyester resins, coatings, pharmaceutics...展开 Maleic Anhydride is a white flaky crystalline granule with a heavy irritant odor that is soluble in alcohol, ether, acetone, water and maelic acid. This product is designed for use in the production of unsaturated polyester resins, coatings, pharmaceutics, agricultural insecticide, oil products, plastics and surfacants. Maleic Anhydride has a crystallization point of ≥52.4℃ and a molecular weight of 98.058. 收起 | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| ONEX MB 1000RE | Glonatech S.A. | ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications o...展开 ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications of this product include adhesives, marine coatings, and resin-based parts. 收起 | |
| ONEX MW 1000C1 | Glonatech S.A. | ONEX MW 1000C1 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥94.0% and is ...展开 ONEX MW 1000C1 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥94.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C2 | Glonatech S.A. | ONEX MW 1000C2 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0% and is ...展开 ONEX MW 1000C2 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C3 | Glonatech S.A. | ONEX MW 1000C3 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥98.0% and is ...展开 ONEX MW 1000C3 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥98.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C4 | Glonatech S.A. | ONEX MW 1000C4 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0-98.0% an...展开 ONEX MW 1000C4 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0-98.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1001 | Glonatech S.A. | ONEX MW 1001 is a carboxyl functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coa...展开 ONEX MW 1001 is a carboxyl functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| ONEX MW 1002 | Glonatech S.A. | ONEX MW 1002 is a phenol functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coati...展开 ONEX MW 1002 is a phenol functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| ONEX MW 1003 | Glonatech S.A. | ONEX MW 1003 is a amino functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatin...展开 ONEX MW 1003 is a amino functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| POLARGEL® | American Colloid Company | POLARGEL® is a specially processed, water-washed product that is a selectively-mined sodium montmorillonite clay, supplied as a white micro fine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer for a variety of indus...展开 POLARGEL® is a specially processed, water-washed product that is a selectively-mined sodium montmorillonite clay, supplied as a white micro fine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer for a variety of industrial products where low grit, light color, and high purity are required. 收起 | |
| POLARGEL® CA | American Colloid Company | POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a bin...展开 POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a binder and plasticizer to ease extrusion and increase green strength with minimal viscosity increase. 收起 | |
| POLARGEL® T | American Colloid Company | POLARGEL® T is a specially processed, water-washed product that is a selectively- mined sodium montmorillonite clay, supplied as a white microfine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer used in coatings. It...展开 POLARGEL® T is a specially processed, water-washed product that is a selectively- mined sodium montmorillonite clay, supplied as a white microfine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer used in coatings. It is used whenever a white, inorganic, thixotropic material is desired for formulations. 收起 | |
| Sodium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Sodium Stearate is a white powder that has a sodium content of 7.5%. This product is often used in paints, coatings and inks. | |
| Stainban® 180 | WPC Technologies, Inc. | Stainban® 180 is a zinc-free, aqueous, tannin stain inhibitor pre-treatment in a clear liquid form. This product has a total solids content of 35-38% and a specific gravity of 1.25-1.35 g/cm3. It is most commonly used in wood coating and water-based coati...展开 Stainban® 180 is a zinc-free, aqueous, tannin stain inhibitor pre-treatment in a clear liquid form. This product has a total solids content of 35-38% and a specific gravity of 1.25-1.35 g/cm3. It is most commonly used in wood coating and water-based coating applications. 收起 | |
| Stainban® 185 | WPC Technologies, Inc. | Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for w...展开 Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. 收起 | |
| Stainban® 186 | WPC Technologies, Inc. | Stainban® 186 is a zinc-free, odorless, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 41-43% and a specific gravity of 1.5-1.6 g/cm3. It is most commonly used in water-based primer applications. | |
| Stainban® 187 | WPC Technologies, Inc. | Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended...展开 Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. 收起 | |
| Stainban® 208 | WPC Technologies, Inc. | Stainban® 208 is a white, non-refractive pigment that is in a white powder form. This product has an oil absorption of 24-31 lbs/100lbs and a specific gravity of 2.95 g/cm3. It is most commonly used as a tannin stain inhibitor in wood coating applications...展开 Stainban® 208 is a white, non-refractive pigment that is in a white powder form. This product has an oil absorption of 24-31 lbs/100lbs and a specific gravity of 2.95 g/cm3. It is most commonly used as a tannin stain inhibitor in wood coating applications. 收起 | |
| Strontium Chromate 176 | WPC Technologies, Inc. | Strontium Chromate 176 is a yellow-colored, low dust, low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 18-25 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in aqueous and so...展开 Strontium Chromate 176 is a yellow-colored, low dust, low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 18-25 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in aqueous and solvent-borne paint systems and coil primers. 收起 | |
| Strontium Chromate 177 | WPC Technologies, Inc. | Strontium Chromate 177 is a yellow-colored, low dust, very low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 11-20 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in high-soli...展开 Strontium Chromate 177 is a yellow-colored, low dust, very low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 11-20 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in high-solids primer applications. 收起 | |
| VOLCLAY® 325 Mesh | American Colloid Company | VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial app...展开 VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial applications where low grit and a small, dry particle size are required. It can be applied in ceramics, porcelain and glaze applications. 收起 | |
| VOLCLAY® GPG 30 | American Colloid Company | VOLCLAY® GPG 30 is a granular sodium bentonite with an average particle size ranging between 20 and 70 mesh. This product is a multi-purpose product noted for rapid dispersion in water. It is employed in a wide variety of industrial applications. | |
| VOLCLAY® HPM-20 | American Colloid Company | VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, ...展开 VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in adhesives and industrial applications. 收起 | |
| VOLCLAY® HPM-75 | American Colloid Company | VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion sta...展开 VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer for adhesives, coatings, and other industrial applications. 收起 | |
| VOLCLAY® Premium Gel | American Colloid Company | VOLCLAY® Premium Gel is a general purpose filler for use when mild thixotropic properties are desirable. This product is a 200 mesh rheology enhancer, and it is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial product...展开 VOLCLAY® Premium Gel is a general purpose filler for use when mild thixotropic properties are desirable. This product is a 200 mesh rheology enhancer, and it is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial products where a dry 200 mesh particle size and medium viscosity is required. 收起 | |
| VOLCLAY® Rheospan | American Colloid Company | VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabi...展开 VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in a variety of industrial applications. 收起 | |
| VOLCLAY® SPV 200 | American Colloid Company | VOLCLAY® SPV 200 is a selectively-mined and processed, high-quality sodium bentonite. This product is a multi-purpose suspending, emulsifying, and binding agent used in industrial products where a dry 200 mesh particle size is required. | |
| Wayncor® 205 | WPC Technologies, Inc. | Wayncor® 205 is an anti-corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. This product has an oil absorption maximum of 60 lbs/100lbs and a specific gravity of 2.44 g/cm3. It is most commonly used in thin f...展开 Wayncor® 205 is an anti-corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. This product has an oil absorption maximum of 60 lbs/100lbs and a specific gravity of 2.44 g/cm3. It is most commonly used in thin film and coil coating applications. 收起 | |
| Wayncor® 211 | WPC Technologies, Inc. | Wayncor® 211 is an anti-corrosion pigment in a white powder form. This product has an oil absorption of 16-31 lbs/100lbs and a specific gravity of 2.98 g/cm3. It is most commonly used in solvent and water-based epoxy primer applications. | |
| Wayncor® 213 | WPC Technologies, Inc. | Wayncor® 213 is a general purpose anti-corrosion pigment in a white powder form. This product has an oil absorption of 38-52 lbs/100lbs and a specific gravity of 2.70 g/cm3. It is most commonly used in solvent and water-based coating system and baking ena...展开 Wayncor® 213 is a general purpose anti-corrosion pigment in a white powder form. This product has an oil absorption of 38-52 lbs/100lbs and a specific gravity of 2.70 g/cm3. It is most commonly used in solvent and water-based coating system and baking enamel applications. 收起 | |
| Wayncor® 214 | WPC Technologies, Inc. | Wayncor® 214 is an anti-corrosion pigment in a white powder form. This product has an oil absorption of 20-32 lbs/100lbs and a specific gravity of 2.65 g/cm3. It is most commonly used in solvent and water-based coating systems. | |
| Wayncor® 222 | WPC Technologies, Inc. | Wayncor® 222 is a white, non-refractive, anti-corrosive pigment in a powder form. This product has an oil absorption of 17-30 lbs/100lbs and a specific gravity of 3.25 g/cm3. It is most commonly used in protective coating applications. | |
| Wayncor® 226 | WPC Technologies, Inc. | Wayncor® 226 is a multi-component corrosion inhibitor pigment in a white powder form. This product has an oil absorption of 22-30 lbs/100lbs and a specific gravity of 2.90 g/cm3. It is most commonly used in water-based acrylic primer applications. |
