| A-C 400 | DKSH | A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appl...展开 A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 400A | DKSH | A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing ap...展开 A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405M | DKSH | A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 405T | DKSH | A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available...展开 A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...展开 A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...展开 A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. 收起 | Request Sample |
| Acrylic Resin GA-003 | DKSH | Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...展开 Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| CO2PURE AIR PURIFIER | DKSH | CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for pai...展开 CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia. 收起 | Request Sample |
| DENSURF HR 700A | DKSH | DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North Ame...展开 DENSURF HR 700A is ambient curing silicon resin used in heat and corrosion resistant coatings. Thermal stability up to 600-650 °C and corrosion protection are achieved in combination with the suitable formulations. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 800 | DKSH | DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 800 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| DENSURF HR 900 | DKSH | DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as alu...展开 DENSURF HR 900 is an air-drying silicon resin used in heat resistant coatings. It is compatible with organic resins such as alkyd resin. It gives thermal stability up to 650°C when formulated with suitable thermally stable pigments and fillers such as aluminum and iron oxide pigments. This product is available for North America and for Japan, India, South Korea, Taiwan and China in Asia (all other countries are excluded). 收起 | Request Sample |
| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...展开 Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. 收起 | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...展开 Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. 收起 | |
| Dynasylan® 9896 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9896 is an oligomeric short-chain alkylfunctional silane. It is soluble in common organic solvents. | |
| Dynasylan® AR | Evonik Operations GmbH, BL Silanes | Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic ca...展开 Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primers). In zinc rich paints with a zinc content above 95% Dynasylan® AR binds the zinc and allows the formation of hard coatings with an effective galvanic protection. 收起 | |
| Dynasylan® F 8263 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8263 acts as an oleophobic agent to modify carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). | |
| Dynasylan® HMDS | Evonik Operations GmbH, BL Silanes | Dynasylan® HMDS is a hydrophobizing agent for surface modification. It can also be used to modify polymers. | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...展开 Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. 收起 | |
| Dynasylan® HYDROSIL 2775 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2775 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| Dynasylan® HYDROSIL 2909 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | 一种甲基丙酸烯官能硅烷，可用作粘胶促进剂、表面改性剂、高分子合成共聚单体，并可作为交联剂。 | |
| Dynasylan® MKS | Evonik Operations GmbH, BL Silanes | Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence o...展开 Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence of moisture. Dynasylan® MKS is a binder with superior anti-settling properties. Paints formulated with Dynasylan® MKS can easily be stirred-up even after longer storage times. After processing, the coating will cure in the presence of atmospheric moisture. Overcoating with conventional topcoat systems is facile. Zinc dust paints based on Dynasylan® MKS provide effective protection of steel against corrosion in aggressive industrial and coastal environments at elevated temperatures (up to 420 °C) in the presence of chemicals. 收起 | |
| Dynasylan® OCTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® OCTMO is commonly used as a hydrophobic surface modifier for fillers and pigments. | |
| Dynasylan® SILBOND® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperatu...展开 Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 40-HF | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high tempe...展开 Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 50 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temper...展开 Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® Condensed | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder fo...展开 Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SILBOND® H-6c | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be use...展开 Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be used for investment casting applications. 收起 | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...展开 Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. 收起 | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...展开 Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. 收起 | |
| Dynasylan® SILBOND® PURE | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol...展开 Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SIVO 110 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 110 is a multifunctional, basically VOC-free, water-borne sol-gel hybrid binder cured at elevated temperatures. It is composed of organofunctional silanes and functionalized SiO2 particles. | |
| Dynasylan® SIVO 121 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 121 is a multifunctional, nearly VOC-free, water-borne silane system. It can act most prominently as a hydrophobizing or olephobizing agent for plain wood surfaces or weathered, originally painted treated wood surfaces. | |
| Dynasylan® SIVO 140 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations bas...展开 Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations based on Dynasylan® SIVO 140 cure at room temperature. 收起 | |
| Dynasylan® SIVO 160 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major b...展开 Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major breakthrough for water-borne sol-gel systems. 收起 | |
| Dynasylan® SIVO 214 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 214 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂、增粘剂和/或表面改性剂。 | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂, 增粘剂和/或表面改性剂。 | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| GMA | DKSH | Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy funct...展开 Glycidyl methacrylate (GMA) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| GMA 97 | DKSH | Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy fu...展开 Glycidyl methacrylate (GMA 97) is an ester of methacrylic acid and a common monomer used in the creation of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. Glycidyl methacrylate is produced by several companies worldwide, including Dow Chemical. This product is available in Europe and Asia. 收起 | Request Sample |
| HIGREE™ C5 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HI...展开 HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HIGREE™ C5 Petroleum Resin is primarily used as an additive in PSA, hot melt adhesives, sealants, and thermoplastic road marking paints. 收起 | |
| HIGREE™ C9 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C9 Petroleum Resin is a hydrocarbon resin that is primarily used as an additive in solvent based adhesives, hot melt adhesives, alkyd based paints, and printing inks. | |
| HIGREE™ CL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an ...展开 HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an additive in road marking paint, hot melt adhesive, and PSA. 收起 | |
| HIGREE™ CL1102 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially design...展开 HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially designed as a binder for thermoplastic road marking formulations. 收起 | |
| HIGREE™ GD120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GD130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GL120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily ...展开 HIGREE™ GP100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and paints. 收起 | |
| HIGREE™ GP120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, inks, and industrial paints. 收起 | |
| HIGREE™ GR100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints. 收起 | |
| HIGREE™ GR120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints and solvent adhesives. 收起 | |
| HIGREE™ GV100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints and hot melt adhesives. 收起 | |
| HIGREE™ GV120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and adhesives. 收起 | |
| HIGREE™ GV140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| IPDA | DKSH | IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in...展开 IPDA is a colorless or pale yellow transparent liquid with an amine-like odor at room temperature. It is a mixture of two stero-isomers of 3-aminomethyl-3,5,5-trimethylcyclohe-xylamine. IPDA is a cycloalifatic diamine with special structure and is used in all typical reactions of this kind of amine functional chemicals. It is widely miscible with a full range of alifatic, aromatic and halogenated solvents of different polarity. Chemical description: 3-aminomethyl-3,5,5-trimethylcyclohexylamine. This product is available in Europe and Korea. 收起 | Request Sample |
| ITAMID B | DKSH | ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...展开 ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID C | DKSH | ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...展开 ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID C/F | DKSH | ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...展开 ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. 收起 | Request Sample |
| ITAMID D | DKSH | ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...展开 ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. 收起 | Request Sample |
| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...展开 ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...展开 ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. 收起 | Request Sample |
| ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...展开 ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. 收起 | Request Sample |
| ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...展开 ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. 收起 | Request Sample |
| ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...展开 ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. 收起 | Request Sample |
| ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
| ITAMID M30P | DKSH | ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bondin...展开 ITAMID M30P is a thermoplastic polyamide resin for use in flexographic or gravure lamination inks. The product shows excellent adhesion to many substrates (metal or polyolefin). The product has excellent flexibility and is particularly suitable for bonding of PVC. 收起 | Request Sample |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| Luna ESBO A | DKSH | Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility...展开 Luna ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility and to bring high functionality. Moderate cure speed, with low odor and skin irritancy. Good compatibility with non polar substrates. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-add RC961 | DKSH | Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This produ...展开 Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 550 | DKSH | Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be ...展开 Luna-cryl 550 is a glycidyl-functional acrylic hardener designed to produce low gloss, exterior-durable polyester powder coatings. Benefits include consistent gloss, smooth matte appearance and consistent performance. “One-shot” low gloss coatings can be produced by using Luna-cryl 550 in conjunction with polyesters having acid values between 30-35 mg KOH/g. Standard polyester resins used for TGIC, HAA, GMA or Araldite PT-910 powder coatings are well suited for use with Lunacryl 550. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 700 | DKSH | Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-cryl 710 | DKSH | Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range...展开 Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e., 33) to produce exterior durable powder coatings with dead matte to low gloss finishes (60° gloss range 0–20). Luna-cryl 710 offers improved flexibility as compared to its predecessor, Luna-cryl 700. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-pal A81 | DKSH | Luna-pal A81 is a polyaldehyde resin produced by condensation of urea aliphatic aldehydes. It is ideal for use in Pigment pastes and Industrial coatings. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal A81 K | DKSH | Luna-pal A81 K is a polyaldehyde resin with wide solubility and compatibility. It is ideal for use in pigment pastes and industrial coatings. Luna-pal A81 K has a softening range of 80-100ºC. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal A91 K | DKSH | Luna-pal A91 K is a polyaldehyde resin with wide solubility and compatibility. It is ideal for use in pigment pastes and industrial coatings. Luna-pal A91 K has a softening range of 90-100ºC. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-pal KY-A81-C (Benzene Free) | DKSH | Luna-pal KY-A81-C (Benzene Free) is a polyaldehyde resin for pigment dispersions, or to optimize pigment dispersion in inks and coatings. It shows excellent compatibility with many coating/printing raw materials. It is soluble in most organic solvents and...展开 Luna-pal KY-A81-C (Benzene Free) is a polyaldehyde resin for pigment dispersions, or to optimize pigment dispersion in inks and coatings. It shows excellent compatibility with many coating/printing raw materials. It is soluble in most organic solvents and has very good wetting and dispersion properties. It is a multifunctional additive used also to improve the adhesion, gloss, hardness, and solid content. It can also be used in universal pigment pastes. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-tex RC3940F | DKSH | Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is availab...展开 Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-tribo K T405 | DKSH | Luna-tribo K T405 is a masterbatch of an additive in a carboxylated polyester to enhance tribochargeability in powder coatings. Active content: 5% of a hindered tertiary amine. | Request Sample |
| Luna-vin UM 40/50 | DKSH | Luna-vin UM40/50 is a medium molecular weight co-polymer of vinyl chloride and vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-vin VAGD-W | DKSH | Luna-vin VAGD-W is a high molecular weight, with hydroxyl functional group, partially hydrolyzed vinyl chloride/vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-vin VAGH-W | DKSH | Luna-vin VAGH-W is a high molecular weight, with hydroxyl functional group, partially hydrolyzed vinyl chloride/vinyl acetate resin. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-vin VMCC/A-W-N17 | DKSH | Luna-vin VMCC/A-W-N17 is a high molecular weight, with carboxyl functional group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North Amer...展开 Luna-vin VMCC/A-W-N17 is a high molecular weight, with carboxyl functional group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Terpolymer. This product is available in Europe, Asia and North America. 收起 | Request Sample |
| Luna-vin VMCH-W | DKSH | Luna-vin VMCH-W is a high molecular weight, with carboxyl fuctional group, group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Maleic Acid Terpolymer resin. This product is available in Europe, A...展开 Luna-vin VMCH-W is a high molecular weight, with carboxyl fuctional group, group, comprised of vinyl chloride, vinyl acetate and maleic acid. Chemical name: Vinyl Chloride-Vinyl Acetates Maleic Acid Terpolymer resin. This product is available in Europe, Asia and North America. 收起 | Request Sample |
