| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...展开 R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...展开 R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. 收起 | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...展开 R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 收起 | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起 | |
| R-3975 | NuSil Silicone Technology 1 | R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. ...展开 R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. 收起 | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...展开 R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...展开 R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. 收起 | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...展开 R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. 收起 | |
| R21-2615 | NuSil Silicone Technology 1 | R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for mak...展开 R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for making molded parts. 收起 | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...展开 R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. 收起 | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起 | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...展开 R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...展开 R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. 收起 | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...展开 R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. 收起 | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...展开 R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). 收起 | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...展开 R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. 收起 | |
| R7-3521-11 | NuSil Silicone Technology 1 | R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stop...展开 R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stoppers, and O-rings. It can also be used for applications that require a good solvent resistance. 收起 | |
| RC 8 | CINKARNA | RC 8 is a milled, rutile titanium dioxide pigment. This product has not been micronized, but has been lattice-stabilized with aluminum compounds. It can be used in road-marking paints. | |
| RC 813 | CINKARNA | RC 813 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum compounds. It can be used in industrial and decorative coatings, radiator paints, domestic appliance finishe...展开 RC 813 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum compounds. It can be used in industrial and decorative coatings, radiator paints, domestic appliance finishes, package lacquers, and printing inks. 收起 | |
| RC 82 | CINKARNA | RC 82 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial, decorative and wallpaper coatings, pl...展开 RC 82 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial, decorative and wallpaper coatings, plaster paints, and powder coatings, among other applications. 收起 | |
| RC 823 | CINKARNA | RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacq...展开 RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacquers, and powder coatings, among other applications. 收起 | |
| RC 833 | CINKARNA | RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coa...展开 RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coatings, plaster paints, and printing inks. 收起 | |
| RC 84 | CINKARNA | RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster...展开 RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster and silicon paints. 收起 | |
| RC 86 | CINKARNA | RC 86 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, aqueous and solvent flat paints, paper and wallpa...展开 RC 86 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, aqueous and solvent flat paints, paper and wallpaper coatings, and silicon paints. 收起 | |
| Rubine 4B | Brill International Trade (Tianjin) Co., Ltd. | Rubine 4B is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink. | |
| Rubine 4B341 | Brill International Trade (Tianjin) Co., Ltd. | Rubine 4B341 is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.7, and a heat resistance of 180°C. Its main application is in offset ink. | |
| Rubine 8B | Brill International Trade (Tianjin) Co., Ltd. | Rubine 8B is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink. | |
| Rubine 9B | Brill International Trade (Tianjin) Co., Ltd. | Rubine 9B is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink. | |
| Rubine A6B | Brill International Trade (Tianjin) Co., Ltd. | Rubine A6B is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink. | |
| Rubine BK | Brill International Trade (Tianjin) Co., Ltd. | Rubine BK is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink. | |
| Rubine BK-S | Brill International Trade (Tianjin) Co., Ltd. | Rubine BK-S is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP and PA...展开 Rubine BK-S is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP and PA ink. 收起 | |
| Rubine BK-W | Brill International Trade (Tianjin) Co., Ltd. | Rubine BK-W is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 170°C. Its main application is in water-based ink, although it can also be used in ...展开 Rubine BK-W is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 424.46, a density of 1.8, and a heat resistance of 170°C. Its main application is in water-based ink, although it can also be used in offset ink. 收起 | |
| SCV-2585 | NuSil Silicone Technology 1 | SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards...展开 SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards. It can also perform under a broad temperature range for electronic and space applications. 收起 | |
| SCV-2586 | NuSil Silicone Technology 1 | SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels an...展开 SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels and for applications that require a product with minimal volatility. 收起 | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...展开 SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. 收起 | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...展开 SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. 收起 | |
| SCV-2596 | NuSil Silicone Technology 1 | SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other confi...展开 SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other configurations require a flowable to limited flow material. It features Ultra Low OutgassingTM which helps it perform under extreme operating conditions and helps avoid condensation in sensitive devices. 收起 | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...展开 SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. 收起 | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...展开 SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. 收起 | |
| SCV1-2599 | NuSil Silicone Technology 1 | SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, ...展开 SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, base plates, heat sinks or where grooves require a non-flowable to limited flow material. 收起 | |
| SCV2-2590 | NuSil Silicone Technology 1 | SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of ...展开 SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of electronic components. It will protect against extreme temperatures, humidity, radiation, thermal and mechanical stress. 收起 | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...展开 SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. 收起 | |
| SFM5-2350 | NuSil Silicone Technology 1 | SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibrati...展开 SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibration dampening situations that require a lightweight, flexible foam, and provides excellent thermal insulation and radiation resistance. It is useful where stability at higher and lower temperatures is required. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展开 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 416 | Elkem Silicones | SILCOLAPSE 416 is a compound based on polydimethyl siloxane oil and silica. It has the characteristic of being easy to disperse in most foaming mediums. | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展开 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展开 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展开 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE 7611 | Elkem Silicones | SILCOLEASE 7611 is a kind of tri-component solventless type paper release system:Silcolease 7611 (base polymer)Silcolease crosslinker 321(crosslinker)Silcolease catalyst 91B (catalyst). | |
| SILCOLEASE ADD 107 | Elkem Silicones | SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the relea...展开 SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the release system on PET film both when laminated against adhesives and reeled as coated film. 收起 | |
| SILCOLEASE ADD 382 | Elkem Silicones | SILCOLEASE ADD 382 is a silicone based additive used with a reactive solventless silicone polymer system for POLYESTER (PET) FILM RELEASE COATING applications. | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE CATA 11091 M | Elkem Silicones | SILCOLEASE CATALYST 11091 M is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 12070 | Elkem Silicones | SILCOLEASE CATALYST 12070 is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 340 | Elkem Silicones | SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high...展开 SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high speeds. 收起 | |
| SILCOLEASE CATA 62 A | Elkem Silicones | SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food conta...展开 SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food contact application. 收起 | |
| SILCOLEASE CATA 62 B | Elkem Silicones | SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applicati...展开 SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applications. 收起 | |
| SILCOLEASE CATA 90 B | Elkem Silicones | SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALY...展开 SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALYST 90 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 91 B | Elkem Silicones | SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is use...展开 SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE CATA 93 B | Elkem Silicones | SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B i...展开 SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 94 B | Elkem Silicones | SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in po...展开 SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 70840 | Elkem Silicones | SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin...展开 SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin compound forming an ELASTOMERIC COATING. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 70827 A | Elkem Silicones | SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOL...展开 SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOLEASE EMULSION 70840. It only catalyses polycondensation type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE MRA 385 | Elkem Silicones | SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower do...展开 SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower doses than 1st generation mist reducing products at line speeds up to 1600 m/min. Typical addition levels from 2% to 6% are sufficient for most applications up to about 1000 m/min. 收起 | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-168 | Elkem Silicones | SILCOLEASE PC-168 is a thermally curable silicone emulsion of silanol functional polysiloxane polymers which provide an easy release surface for adhesives or otherwise tacky materials. SILCOLEASE PC-94 tin catalyst is required to make a fully crosslinkabl...展开 SILCOLEASE PC-168 is a thermally curable silicone emulsion of silanol functional polysiloxane polymers which provide an easy release surface for adhesives or otherwise tacky materials. SILCOLEASE PC-94 tin catalyst is required to make a fully crosslinkable coating. Post cure is recommended with tin catalyzed emulsions. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-370 | Elkem Silicones | SILCOLEASE PC-370 is a platinum catalyst compound for use with polyaddition solventless release coatings. The catalyst complex is dispersed in a vinyl terminated siloxane fluid for ease of addition. | |
| SILCOLEASE PC-675 | Elkem Silicones | SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits ...展开 SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits very low polarity and surface tension more akin to high molecular weight di-methyl silicones. When blended at levels of 1-6% into the SILCOLEASE UV POLY 200 UV/EB silicone polymer release coating system, it effectively acts as a low releaseControlledReleaseAdditive (CRA-minus). It also cuts both dynamic (Kd) and static (Ks) coefficients of friction, up to 50% compared with standard UV Premium Release formulations. SILCOLEASE PC-675 modified silicone release chemistries result in smoother coatings with often dramatically reduced release zippiness against very aggressive adhesives. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam irradiation. 收起 | |
| SILCOLEASE PC-850 | Elkem Silicones | SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polye...展开 SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polyester film. A 1% addition to the formulated bath will produce excellent anchorage even under high humidity conditions. SILCOLEASE PC-850 does not require excessive surface treatment of PET thus providing energy savings nor does SILCOLEASE PC-850 slow cure response as compared to other adhesion promoters. For best results, this adhesion promoter ought to be added to the catalyzed silicone release coating as soon as possible before initiating the coating operation. 收起 |
