| 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
| BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...展开 BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. 收起 | |
| Calfax® 10L-45 | Pilot Chemical | Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起 | |
| Calfax® 10LA-75 | Pilot Chemical | Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起 | |
| Calfax® 16L-35 | Pilot Chemical | Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起 | |
| Calfax® 6LA-70 | Pilot Chemical | Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起 | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起 | |
| FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
| FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...展开 FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. 收起 | |
| FY-F501 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or wa...展开 FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or water-based coatings and ink applications. 收起 | |
| FY-F502 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F502 Fluoride Surfactant appears as a dark yellow transparent liquid. This product is used to reduce the surface tension of liquids and to increase foaming abilities. In particular, it can be used in solvent-based and water-based coatings and inks. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hycure 1173 | ChemFine International Co., Ltd. | Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time. | |
| Hycure 184 | ChemFine International Co., Ltd. | Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time. | |
| Hycure 907 | ChemFine International Co., Ltd. | Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time. | |
| Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
| Hycure Benzil | ChemFine International Co., Ltd. | Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide. | |
| Hycure Benzoin | ChemFine International Co., Ltd. | Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry. | |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
| JLS-APP | ChemFine International Co., Ltd. | JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose. | |
| Masurf® UV-350 | Pilot Chemical | Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起 | |
| OIT | ChemFine International Co., Ltd. | OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint. | |
| TGIC | ChemFine International Co., Ltd. | TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...展开 TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. 收起 | |
| THEIC | ChemFine International Co., Ltd. | THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, ...展开 THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, textile, plastics, and photo industries. 收起 |
