| Calfax® 10L-45 | Pilot Chemical | Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起 | |
| Calfax® 10LA-75 | Pilot Chemical | Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起 | |
| Calfax® 16L-35 | Pilot Chemical | Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起 | |
| Calfax® 6LA-70 | Pilot Chemical | Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起 | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起 | |
| FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
| FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...展开 FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. 收起 | |
| FY-F501 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or wa...展开 FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or water-based coatings and ink applications. 收起 | |
| FY-F502 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F502 Fluoride Surfactant appears as a dark yellow transparent liquid. This product is used to reduce the surface tension of liquids and to increase foaming abilities. In particular, it can be used in solvent-based and water-based coatings and inks. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Masurf® UV-350 | Pilot Chemical | Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起 | |
| Surfadol® 331 Pigment Dispersing Agent | ACME 艾克米 | Surfadol 331用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 333 Pigment Dispersing Agent | ACME 艾克米 | Surfadol 333用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 333W Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
| Surfadol® 336 | ACME 艾克米 | Surfadol 336用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 338 | ACME 艾克米 | Surfadol 338用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME 艾克米 | 一种乙氧化润湿剂和分子消泡剂（100%活性液体；HLB：4）。性能类似于Surfadol 541，在水性涂料、油墨和胶粘剂体系中具有改善的操作性 | |
| Surfadol® 440 Surfactant | ACME 艾克米 | 一种乙氧化低起泡润湿剂（100%活性液体；HLB：8）。Surfadol 440表面活性剂可提供低泡沫动态和静态表面张力下降，具有改善的分散性，易添加用于水性涂料、油墨和胶粘剂体系 | |
| Surfadol® 465 Surfactant | ACME 艾克米 | 一种乙氧化低起泡润湿剂（100%活性液体；HLB：13）。Surfadol 465是一种乙氧化炔属二醇，可提供低起泡性，降低表面张力并提高在水性涂料、油墨和胶粘剂体系中的溶解性和相容性 | |
| Surfadol® 485 Surfactant | ACME 艾克米 | Surfadol 485是一种非离子型炔二醇改性表面活性剂。它专门设计用于水基系统，并能够有效降低表面张力。这款产品可以提高各种基材和颜料的润湿性，且非常适合研磨阶段使用。Surfadol 485不含硅，无溶剂，推荐用于打印油墨，柔版和凹版油墨，润版液，压敏粘合剂等。 | |
| Surfadol 485W Surfactant | ACME 艾克米 | Surfadol 485W Surfactant is a nonionic low-foam dynamic wetting agent. It is specifically for water-based systems and improves wetting of various substrates and pigments. | |
| Surfadol® 518 | ACME 艾克米 | Surfadol 518具有出色的控制泡沫性能。不会产生不相容问题。对所应用的产品性能无不良影响。 | |
| Surfadol® 520 | ACME 艾克米 | Surfadol 520是一种澄清黄色特体，用于涂料，粘合剂，乳胶浸渍，染料及颜料合成以及清洁产品 | |
| Surfadol® 532 | ACME 艾克米 | Surfadol 532是一种澄清黄色特体，用于涂料，粘合剂，乳胶浸渍，染料及颜料合成以及清洁产品 | |
| Surfadol® 532B | ACME 艾克米 | Surfadol 532B是一种非离子消泡剂（32%活性成分）。它可以有效的在水基油漆和涂料中打破气泡和微气泡。这款产品不含有机硅和APEO。 | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。100%活性固体 | |
| Surfadol® 541A Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，2-乙基己醇稀释 | |
| Surfadol® 541BC Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，2-丁氧基乙醇稀释 | |
| Surfadol® 541DPM Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，二丙二醇单甲醚稀释 | |
| Surfadol® 541E Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，乙二醇稀释 | |
| Surfadol® 541H Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。75%活性液体，乙二醇稀释 | |
| Surfadol® 541PA Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，异丙醇稀释 | |
| Surfadol® 541PG Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，丙二醇稀释 | |
| Surfadol® 541S Surfactant | ACME 艾克米 | Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other sys...展开 Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other systems. Surfadol® 541S is without APEO and non-toxic. 收起 | |
| Surfadol® 550 | ACME 艾克米 | Surfadol 550是一种炔二醇表面活性剂。它可以有效地打破气泡和微泡，并提供卓越持久的泡沫控制，且对应用程序的性能无不良影响。它可以在水/乙醇系统以及以溶剂为基础的系统中使用。这款产品推荐用于涂料，粘合剂，乳胶浸渍，染料和合成颜料，以及清洁产品中。Surfadol 550的密度为0.925-0.935g/cm^3。 | |
| Surfadol® 550P | ACME 艾克米 | Surfadol 550P是一款50%活性物的非离子消泡剂。它在水基油漆和涂料中提供有效和持久的泡沫控制。这款产品不含有机硅和APEO。 |
