| BT-B100 CMIT | BioTio Group | BT-B100 CMIT is a colorless to amber liquid that has a specific gravity of 1.26-1.32 and a pH value of 1.0-4.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B100 MIT | BioTio Group | BT-B100 MIT is a greenish liquid that has a specific gravity of 1.10-1.20 and a pH value of 2.0-5.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-B102 DBNPA | BioTio Group | BT-B102 DBNPA is a white crystalline powder that has a moisture content of ≤0.5% and a pH value of 4.0-6.0. This product is most commonly used as a biocide and preservative in paint applications. | |
| BT-B103 MIT | BioTio Group | BT-B103 MIT is a colorless to amber liquid that has a specific gravity of ≥1.10 and a pH value of 5.0-7.0. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil-water emulsion applications. | |
| BT-B104 IPBC | BioTio Group | BT-B104 IPBC is a white crystalline powder that has a melting point of 65-68°C and a moisture content of ≤0.10%. This product is most commonly used as a highly effective fungicide in coatings and paint applications. | |
| BT-B105 BIT | BioTio Group | BT-B105 BIT is a white to light yellow powder that has a melting point of 155-158°C and a moisture content of ≤15%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B106 OIT | BioTio Group | BT-B106 OIT is an amber liquid that has a specific gravity of ≤1.1% and a moisture content of <0.5%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B107 DCOIT | BioTio Group | BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold,...展开 BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew and algae. It can be used in antifouling paint and other coatings. 收起 | |
| BT-B110 PCMC | BioTio Group | BT-B110 PCMC is a white to off-white crystalline powder that has a melting point of 114-116°C and a moisture content of <2.0%. This product is most commonly used as an antiseptic or antifungal agent in paint applications. | |
| BT-B112 ZPT | BioTio Group | BT-B112 ZPT is a white to off-white powder that has a pH value of 6.5-8.5 and a content/assay of ≥96%. This product is most commonly used as an antibacterial agent in coatings, paints, and adhesives. | |
| BT-B115 BBIT | BioTio Group | BT-B115 BBIT is a light pink, clear liquid that has a pH value of 6.5-8.0 and a density of 1.17 g/cm3. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B117 DBDCB | BioTio Group | BT-B117 DBDCB is a white crystalline powder that has a melting point of 50.0-54.5°C and a content/assay of ≥99%. This product is most commonly used as a preservative in coatings. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| Calfax® 10L-45 | Pilot Chemical | Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起 | |
| Calfax® 10LA-75 | Pilot Chemical | Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起 | |
| Calfax® 16L-35 | Pilot Chemical | Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起 | |
| Calfax® 6LA-70 | Pilot Chemical | Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起 | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Masurf® UV-350 | Pilot Chemical | Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起 | |
| Nitrocellulose Chips | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, an...展开 Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, and damp-proofing cellophane paper and adhesives. 收起 | |
| Nitrocellulose Cotton | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood fi...展开 Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood finishes, and fast-printing inks. 收起 | |
| Nitrocellulose Solution H Type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. Th...展开 Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| Nitrocellulose solution L type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in la...展开 Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| Non-Leafing Aluminum Paste BT-AP110 | BioTio Group | Non-Leafing Aluminum Paste BT-AP110 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP120 | BioTio Group | Non-Leafing Aluminum Paste BT-AP120 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP130 | BioTio Group | Non-Leafing Aluminum Paste BT-AP130 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 16μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP140 | BioTio Group | Non-Leafing Aluminum Paste BT-AP140 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 7μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Anatase BT-A10 | BioTio Group | Titanium Dioxide Anatase BT-A10 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A101 | BioTio Group | Titanium Dioxide Anatase BT-A101 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A102 | BioTio Group | Titanium Dioxide Anatase BT-A102 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A12 | BioTio Group | Titanium Dioxide Anatase BT-A12 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A125 | BioTio Group | Titanium Dioxide Anatase BT-A125 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A126 | BioTio Group | Titanium Dioxide Anatase BT-A126 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R20 | BioTio Group | Titanium Dioxide Rutile BT-R20 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R201 | BioTio Group | Titanium Dioxide Rutile BT-R201 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R202 | BioTio Group | Titanium Dioxide Rutile BT-R202 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R21 | BioTio Group | Titanium Dioxide Rutile BT-R21 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R213 | BioTio Group | Titanium Dioxide Rutile BT-R213 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R214 | BioTio Group | Titanium Dioxide Rutile BT-R214 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展开 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 |
