| Calfax® 10L-45 | Pilot Chemical | Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起 | |
| Calfax® 10LA-75 | Pilot Chemical | Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起 | |
| Calfax® 16L-35 | Pilot Chemical | Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起 | |
| Calfax® 6LA-70 | Pilot Chemical | Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起 | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Masurf® UV-350 | Pilot Chemical | Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起 | |
| Nitrocellulose Chips | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, an...展开 Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, and damp-proofing cellophane paper and adhesives. 收起 | |
| Nitrocellulose Cotton | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood fi...展开 Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood finishes, and fast-printing inks. 收起 | |
| Nitrocellulose Solution H Type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. Th...展开 Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| Nitrocellulose solution L type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in la...展开 Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| Ti-Pure™ R-706 | Chemours Titanium Technologies | 多用途金红石颜料，赋予涂料以高光泽度和出色的耐久性。通用于建筑、工业和汽车涂装的溶剂型和水性体系。 | |
| Ti-Pure™ R-741 | Chemours Titanium Technologies | 它是Ti-Pure® R-931和水以及分散剂在最优化涂料颜料性能的条件下混合制备的色浆，用于建筑涂料 | |
| Ti-Pure™ R-746 | Chemours Titanium Technologies | Ti-Pure® R-706多用途金红石二氧化钛泥浆，赋予涂料以高光泽度和出色的耐久性。是一种水性体系的通用颜料。具有出色的可分散性、良好的遮盖力和浅蓝色调。 | |
| Ti-Pure™ R-900 | Chemours Titanium Technologies | 金红石二氧化钛颜料，用于一般用途的室内涂料。具有良好的光泽度，高遮盖力和出色的分散性。也可用于电沉积涂布。 | |
| Ti-Pure™ R-902+ | Chemours Titanium Technologies | 一种多用途金红石二氧化钛颜料，通过氯化工艺制造，通用于室内和室外涂料。 | |
| Ti-Pure™ R-960 | Chemours Titanium Technologies | 一种金红石钛白粉颜料，用来满足对抗粉化性、光泽度和色彩保持力有突出要求的应用领域。产品具有出色的室外耐久性、优良的分散性、出色的遮盖力和色彩容忍度。 | |
| Ti-Pure™ Select TS-6300 Titanium Dioxide | Chemours Titanium Technologies | Ti-Pure® Select TS-6300是一款专门为中等或高品质平板（哑光）建筑涂料设计的特殊二氧化钛。它为广泛的平板建筑涂料提供具有更好性能的干性遮盖力和质量一致性，同时保持膜的完整性。TS-6300是一款表面经处理的金红石二氧化钛颜料，它是通过氯化法生产的，可以实现出色的亮度和最大化的遮盖力。TS-6300的耐候性适用于许多外墙建筑涂料，但由于这项性质根据配方会有不同表现，强烈建议先进行检测。 | |
| Ti-Pure™ TS-6200 | Chemours Titanium Technologies | 通过杜邦氯化法制备的金红石型颜料。专门设计用以满足最苛刻的户外耐候性要求。可提供出色的保光率，同时具有独特的分散能力 | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 |
