| Calfax® 10L-45 | Pilot Chemical | Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起 | |
| Calfax® 10LA-75 | Pilot Chemical | Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起 | |
| Calfax® 16L-35 | Pilot Chemical | Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起 | |
| Calfax® 6LA-70 | Pilot Chemical | Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起 | |
| Calfax® DB-45 | Pilot Chemical | Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Masurf® UV-350 | Pilot Chemical | Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起 | |
| Nitrocellulose Chips | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, an...展开 Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, and damp-proofing cellophane paper and adhesives. 收起 | |
| Nitrocellulose Cotton | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood fi...展开 Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood finishes, and fast-printing inks. 收起 | |
| Nitrocellulose Solution H Type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. Th...展开 Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| Nitrocellulose solution L type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in la...展开 Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...展开 SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. 收起 | |
| Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 |
