| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...展开 Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. 收起 | |
| Barium Nitrate | BassTech International | Barium Nitrate is a salt of barium and the nitrate ion, with chemical formula Ba(NO3)2 which appears as a white solid. This product is used in paint, coatings, and inks. | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...展开 Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. 收起 | |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...展开 Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| Fabutit 734 | BassTech International | Fabutit 734 is a modified STPP (Sodium Tripolyphosphate) which acts as a deflocculant in paint, coatings, and inks. This product is three times more effective than standard STPP and is water soluble. | |
| Green Chrome Oxide | BassTech International | Green Chrome Oxide is the inorganic compound of the formula Cr2O3 which is a principal oxide of chromium and is used as a pigment. This product provides opacity, outdoor durability and heat fastness to paint, coatings, and inks. | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Iron Orthophosphate | BassTech International | Iron Orthophosphate is a white phosphate of iron and is non-toxic to pets and wildlife. This product is used in paint, coatings, and inks. Iron Orthophosphate has a very small particle size, which leads to improved absorption. | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展开 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 2 | Axcentive Sarl | Ketjenflex® 2 is ortho-toluenesulfonamide in the form of white to creamy crystals. It is used as a plasticizer in melamine coatings, laminating resins, and thermosetting resins. | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展开 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...展开 Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展开 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展开 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Methyl Ethyl Ketone | BassTech International | Methyl Ethyl Ketone is an organic compound that is a colorless liquid with a sharp, sweet odor reminiscent of butterscotch and acetone. This product is most commonly used as an industrial solvent, but may also be used in paint, coatings, and inks. | |
| Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| PTSC | Axcentive Sarl | PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blockin...展开 PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blocking agent to protect hydroxyl groups during reactions. 收起 | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| Refined Fatty Acid | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram. | |
| Refined Glycerine | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 |
