| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...展开 Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. 收起 | |
| Barium Nitrate | BassTech International | Barium Nitrate is a salt of barium and the nitrate ion, with chemical formula Ba(NO3)2 which appears as a white solid. This product is used in paint, coatings, and inks. | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...展开 Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. 收起 | |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...展开 Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| Fabutit 734 | BassTech International | Fabutit 734 is a modified STPP (Sodium Tripolyphosphate) which acts as a deflocculant in paint, coatings, and inks. This product is three times more effective than standard STPP and is water soluble. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Green Chrome Oxide | BassTech International | Green Chrome Oxide is the inorganic compound of the formula Cr2O3 which is a principal oxide of chromium and is used as a pigment. This product provides opacity, outdoor durability and heat fastness to paint, coatings, and inks. | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Iron Orthophosphate | BassTech International | Iron Orthophosphate is a white phosphate of iron and is non-toxic to pets and wildlife. This product is used in paint, coatings, and inks. Iron Orthophosphate has a very small particle size, which leads to improved absorption. | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展开 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 2 | Axcentive Sarl | Ketjenflex® 2 is ortho-toluenesulfonamide in the form of white to creamy crystals. It is used as a plasticizer in melamine coatings, laminating resins, and thermosetting resins. | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展开 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...展开 Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展开 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展开 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Methyl Ethyl Ketone | BassTech International | Methyl Ethyl Ketone is an organic compound that is a colorless liquid with a sharp, sweet odor reminiscent of butterscotch and acetone. This product is most commonly used as an industrial solvent, but may also be used in paint, coatings, and inks. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PTSC | Axcentive Sarl | PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blockin...展开 PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blocking agent to protect hydroxyl groups during reactions. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| Refined Fatty Acid | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram. | |
| Refined Glycerine | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 |
