| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Amorphic™ A450 | Bunge Amorphic Solutions, LLC. | Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. 收起 | |
| Amorphic™ A950 | Bunge Amorphic Solutions, LLC. | Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...展开 Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. 收起 | |
| Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
| Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
| Amorphic™ I700 | Bunge Amorphic Solutions, LLC. | Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...展开 Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Thermoplastic Road Marking Resin RM-100 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 97-103°C. 收起 | |
| Thermoplastic Road Marking Resin RM-105 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 102-108°C. 收起 | |
| Thermoplastic Road Marking Resin RM-110 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 107-113°C. 收起 | |
| Thermoplastic Road Marking Resin RM-95 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This prod...展开 Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 92-98°C. 收起 | |
| Turpentine Oil 1st | Resin Chemicals Co., Ltd. | Turpentine Oil 1st is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.88. This product is commonly used in the manufacturing of applications such as coating...展开 Turpentine Oil 1st is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.88. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Turpentine Oil Super | Resin Chemicals Co., Ltd. | Turpentine Oil Super is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.87. This product is commonly used in the manufacturing of applications such as coati...展开 Turpentine Oil Super is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.87. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Waterborne Emulsion Rosin Ester WBE138 | Resin Chemicals Co., Ltd. | Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It c...展开 Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It can provide aggressive tack and peel, and give a unique balance of room temperature and low temperature adhesion in pressure sensitive adhesives. 收起 | |
| XOANONS® WE-D210R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D210R is a dispersing agent for titanium white. It is a copolymer solution with acid groups, and a hyperdispersant with AB block structure. It offers excellent viscosity-reduction for titanium dioxide and is suitable for various resin systems....展开 XOANONS® WE-D210R is a dispersing agent for titanium white. It is a copolymer solution with acid groups, and a hyperdispersant with AB block structure. It offers excellent viscosity-reduction for titanium dioxide and is suitable for various resin systems. This product increases covering power, whiteness and gloss of coat film. It also may increase the crosslinking reaction of baking paint for the exist of acid value. Please check the viscosity during the storage. 收起 | |
| XOANONS® WE-D241R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D241R is a dispersing agent for coatings and inks. It is a high molecular weight block style copolymer solution with pigment affinity groups. Better ability of reducing viscosity when dispersing carbon black, bentonite, matting powder, light ...展开 XOANONS® WE-D241R is a dispersing agent for coatings and inks. It is a high molecular weight block style copolymer solution with pigment affinity groups. Better ability of reducing viscosity when dispersing carbon black, bentonite, matting powder, light calcium carbonate, ultrafine zinc phosphate, barium sulfate, mica flour, titanium white and saponite talcum powder in base coating. Reduce addition of diluting agent. This product complies with VOC emission requirements 收起 | |
| XOANONS® WE-D2609R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D2609R is a dispersing agent for coating and ink. It is a polymer solution containing a pigment anchoring group. Dispersing matte powder, glass powder, ultrafine talcum powder has excellent viscosity reduction effect, can be used for high conc...展开 XOANONS® WE-D2609R is a dispersing agent for coating and ink. It is a polymer solution containing a pigment anchoring group. Dispersing matte powder, glass powder, ultrafine talcum powder has excellent viscosity reduction effect, can be used for high concentration matte pulp production. It may occur mild turbidity or crystallization in low temperature. It may become transparent after heating, which does not affect the quality. Storage time and dry speed should be evaluated in 2KPU system. 收起 | |
| XOANONS® WE-D262R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | 高分子润湿分散剂，很好的分散稳定性。分散碳黑具有很好的展色性和光泽。可用于双组份和热固性体系中，不适用于热塑性丙烯酸体系。 | |
| XOANONS® WE-D2645R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | 高分子润湿分散剂,分散中高色素碳黑具有优异的分散效率和降粘能力，不稳泡，显蓝相，储存稳定性优 | |
| XOANONS® WE-D265R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | 高分子润湿分散剂，分散碳黑和有机颜料具有高的展色性和着色力，降粘效果优。可用于热塑性和热固性体系中，不适用于双组分聚氨酯体系。 | |
| XOANONS® WE-D266R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D266R is a dispersing agent for coatings and inks. It is a high molecular weight block style copolymer solution with pigment affinity groups. It is mainly used in automotive refinish systems, and solvent-based coatings, paints, and inks. | |
| XOANONS® WE-D500R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | 信诺®WE-D500 聚醚改性有机硅流平剂，中等程度降低体系的表面张力，降低漆膜表面的摩擦系数，增加滑爽性能、改善抗刮擦能力；增加漆膜的鲜映性和光泽度；优异的清漆相容性；良好的重涂性，对层间附着力影响极小。信诺®WE-D500 是信诺®WE-D501 的低固含产品，用于溶剂型涂料、光固化涂料体系。信诺®WE-D501 可用于溶剂型涂料、光固化涂料、水性涂料体系。 | |
| XOANONS® WE-D5100 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5100 is a polyester siloxane copolymer slip and flow additive. It reduces friction coefficient and improves anti-scratch, slip and gloss. This product is suitable for high temperature baking system, good re-coat and do not influence adhesion ...展开 XOANONS® WE-D5100 is a polyester siloxane copolymer slip and flow additive. It reduces friction coefficient and improves anti-scratch, slip and gloss. This product is suitable for high temperature baking system, good re-coat and do not influence adhesion of coating films. 收起 | |
| XOANONS® WE-D5110 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5110 is a slip and flow additive. It is a polyester siloxane copolymer. It provides stronger surface tension reduction in solvent systems. This product offers excellent anti-cratering ability, reduces the friction coefficient, and improves an...展开 XOANONS® WE-D5110 is a slip and flow additive. It is a polyester siloxane copolymer. It provides stronger surface tension reduction in solvent systems. This product offers excellent anti-cratering ability, reduces the friction coefficient, and improves anti-scratch, slip and gloss. It is suitable for high temperature baking systems, offers good re-coat, and does not influence adhesion of coating films. No foam-stability. Reduce the dosages of defoamers. 收起 | |
| XOANONS® WE-D5405R | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5405R is a polyether siloxane copolymer solution. It has good compatibility in varnish, provides a stronger reduction of the surface tension, and reduces the friction coefficient. This product also improves the scratch resistance, increases s...展开 XOANONS® WE-D5405R is a polyether siloxane copolymer solution. It has good compatibility in varnish, provides a stronger reduction of the surface tension, and reduces the friction coefficient. This product also improves the scratch resistance, increases slip, and has good recoating and minimal influence on adhesion of coating films. It imparts excellent ability of anti-cratering. Normal application like anti-oil agent. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. 收起 | |
| XOANONS® WE-D5410 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5410 is a polyether siloxane copolymer. It offers slip, anti-blocking, and anti-crater effecting, and also improves scrape resistance and defoaming. It is an ideal alternative of oil resistance without side effects on the environment or recoa...展开 XOANONS® WE-D5410 is a polyether siloxane copolymer. It offers slip, anti-blocking, and anti-crater effecting, and also improves scrape resistance and defoaming. It is an ideal alternative of oil resistance without side effects on the environment or recoating. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. 收起 | |
| XOANONS® WE-D5432 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5432 is a slip and anti-blocking additive. It is a polyether siloxane copolymer with excellent compatibility in varnish. It offers excellent substrate wetting ad slip in UV system, as well as flow promotion, anti-crater and defoaming effect. ...展开 XOANONS® WE-D5432 is a slip and anti-blocking additive. It is a polyether siloxane copolymer with excellent compatibility in varnish. It offers excellent substrate wetting ad slip in UV system, as well as flow promotion, anti-crater and defoaming effect. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. 收起 | |
| XOANONS® WE-D5433 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5433 is a polyether siloxane copolymer. It provides stronger reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influenc...展开 XOANONS® WE-D5433 is a polyether siloxane copolymer. It provides stronger reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering and water-soluble properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. 收起 | |
| XOANONS® WE-D5435 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5435 is a polyether siloxane copolymer. It provides a stronger reduction of the surface tension, reduces the friction coefficient, improves anti-scratch, and increases slip performance. It also offers good recoating and minimal influence on a...展开 XOANONS® WE-D5435 is a polyether siloxane copolymer. It provides a stronger reduction of the surface tension, reduces the friction coefficient, improves anti-scratch, and increases slip performance. It also offers good recoating and minimal influence on adhesion of coating films, as well as excellent ability of anti-cratering. This product is normally applied as anti-oil agent. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. 收起 | |
| XOANONS® WE-D545 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | 聚醚改性有机硅流平剂,能有效降低体系的表面张力，具有超级润湿、铺展的能力，在水中添加0.2%，可使水的表面张力值降低至20.5mN/m。信诺®WE-D545 与同类产品比较，不稳泡，具有更优异的消泡性能，帮助提高层间附着力。 | |
| XOANONS® WE-D5450 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5450 is a polyether siloxane copolymer slip and flow additive. It provides stronger reduction of surface tension, promotes flow, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coat...展开 XOANONS® WE-D5450 is a polyether siloxane copolymer slip and flow additive. It provides stronger reduction of surface tension, promotes flow, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering and defoaming properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. 收起 | |
| XOANONS® WE-D5457 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D5457 is a polyether siloxane copolymer with excellent compatibility in varnish. It provides a strong reduction of the surface tension, reduces the friction coefficient, improves anti-scratch and increase slip and anti-blocking. Paste may occu...展开 XOANONS® WE-D5457 is a polyether siloxane copolymer with excellent compatibility in varnish. It provides a strong reduction of the surface tension, reduces the friction coefficient, improves anti-scratch and increase slip and anti-blocking. Paste may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. 收起 |
