UL Prospector

成功!

成功保存搜索结果
Calfax® 10L-45 Pilot Chemical Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorgani...展开 Calfax® 10L-45 is a light amber, water soluble surface active agent that contains no halogenated solvents. It is an aqueous surfactant solution that is compatible with a broad range of high electrolyte solutions such as brine, bleach, caustic and inorganic acids. The high surface activity and the high electrolyte tolerance of Calfax® 10L-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification system under conditions that would not be usable with conventional surface active agents, permitting greater control over latex molecular weight and particle size. 收起
Calfax® 10LA-75 Pilot Chemical Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side cha...展开 Calfax® 10LA-75 is a amber, viscous soluble surface active agent that contains no halogenated solvents. Calfax® 10LA-75 is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 10LA-75 promotes emulsification and solubility in organic solvents. It is recommended that Calfax® 10LA-75 be added to water, if a dilution is needed, as high viscosity occurs when water is added to the Calfax® 10LA-75. The high electrolyte tolerance and surface activity of Calfax® 10LA-75 make it the surfactant of choice for making latex emulsions for adhesives and foam rubber. 收起
Calfax® 16L-35 Pilot Chemical Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as b...展开 Calfax® 16L-35 is an aqueous solution of sodium hexadecyl diphenyl oxide disulfonate, which has a clear light amber appearance and contains no halogenated solvents. Calfax® 16L-35 offers superior solubility and stability in electrolyte solutions such as brine, bleach, caustic and inorganic acids. The long, linear side chain promotes lower critical micelle concentration (CMC), higher surface tension and lower foam stability than the other Calfax® products. Calfax® 16L-35 offers substantially less foam than shorter chain disulfonates. It is an efficient emulsifier for ABS resins and styrene-butadiene latex, among others. 收起
Calfax® 6LA-70 Pilot Chemical Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-...展开 Calfax® 6LA-70 is a clear amber liquid surface active agent that contains no halogenated solvents. It is compatible with a broad range of high electrolyte solutions, such as brine, bleach, caustic and inorganic acids. The linear side chain of Calfax® 6LA-70 promotes emulsification and solubility in organic solvents. This product is effective as a solubilizer, coupler and hydrotrope for use in acid and alkaline cleaners where conventional surfactants don't have enough solubility. It also finds application in glass cleaners, concentrated laundry detergents, kitchen and bath cleaners, pot and pan, hard surface cleaners and concrete cleaners. 收起
Calfax® DB-45 Pilot Chemical Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sod...展开 Calfax® DB-45 is a clear light amber aqueous solution of sodium dodecyl branched dipheny oxide disulfonate. It contains no halogenated solvents and is compatible with a broad range of acids, alkalis, chlorine and peroxide bleaches and builders such as sodium carbonate and sodium metasilicate. The high surface activity and the high electrolyte tolerance of Calfax® DB-45 make it the surfactant of choice for the manufacture of latex emulsions for adhesives and foam rubber. These properties allow the user to operate the emulsification process under conditions that would not be usable with conventional surface active agents, permitting greater control over latex’s molecular weight and particle size. Calfax® DB-45 also aids in improving a latex emulsion’s thermal and mechanical stability. 收起
MASURF® FS-3330 Pilot Chemical MASURF® FS-3330 is characterized as a 100% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330 contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide rang...展开 MASURF® FS-3330 is characterized as a 100% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330 contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide range of systems from wood to stone. This product imparts oil and water repellency, stain resistance and antiblock performance to solvent-based coatings, alkyds, and stains. 收起
MASURF® FS-3330A Pilot Chemical MASURF® FS-3330A is characterized as a 30% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330A contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide ran...展开 MASURF® FS-3330A is characterized as a 30% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution. FS-3330A contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide range of systems from wood to stone. When formulated into aqueous floor finishes and sealers, the simple addition of 25-50ppm active FS-3330A imparts wetting and leveling with demonstrable oil and grease resistance. It imparts protective oil and grease resistance to wood, concrete, stone and tile surfaces used as building materials, including kitchens, flooring and bathrooms. 收起
Masurf® FS-1620 Pilot Chemical Masurf® FS-1620 is characterized as a 20% active fluoroaliphatic quaternary ammonium C6-based fluorosurfactant in an aqueous solution. As a cationic surfactant, this product is a superior surface tension and interfacial tension reduction agent with substa...展开 Masurf® FS-1620 is characterized as a 20% active fluoroaliphatic quaternary ammonium C6-based fluorosurfactant in an aqueous solution. As a cationic surfactant, this product is a superior surface tension and interfacial tension reduction agent with substantive surface properties similar to alkyl quaternaries. It is substantive to metal and siliceous surfaces for use in polishes and corrosion inhibitors. Masurf® FS-1620 can also be used as a leveling and coalescent aid in aqueous polymer latex coatings. 收起
Masurf® FS-2800 Pilot Chemical Masurf® FS-2800 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2800 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wid...展开 Masurf® FS-2800 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2800 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. Useful in Water-Based Latex Paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2800 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-2825 Pilot Chemical Masurf® FS-2825 is characterized as a 25% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2825 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide...展开 Masurf® FS-2825 is characterized as a 25% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2825 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. Masurf® FS-2825 is useful in water-based latex paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2825 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-2900 Pilot Chemical Masurf® FS-2900 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2900 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wid...展开 Masurf® FS-2900 is characterized as a 100% active aqueous fluoroaliphatic polyoxyethylene surfactant dispersion. FS-2900 is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. It is useful in water-based latex paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2900 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-2950 Pilot Chemical Masurf® FS-2950 is characterized as a 50% active aqueous fluoroaliphatic polyoxyethylene surfactant solution. It is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range ...展开 Masurf® FS-2950 is characterized as a 50% active aqueous fluoroaliphatic polyoxyethylene surfactant solution. It is a C6-based nonionic fluorosurfactant with the ability to contribute exceptional wetting, spreading and leveling properties to a wide range of systems. With typical use levels of 50-500ppm, this product is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. Masurf® FS-2950 is stable in anionic and cationic systems, effective in high or low pH, and recommended in a wide range of applications. It is useful in water-based latex paints to extend opentime (wet-edge time). In high performance polymer and non-aqueous resin systems, FS-2950 acts as a coupling agent for fillers, imparts anti-soiling performance and allows wetting of low energy surfaces. 收起
Masurf® FS-630 Pilot Chemical Masurf® FS-630 is characterized as a 30% active C-6 Based fluoroaliphatic sodium sulfosuccinate in either a water/glycol ether solution (EB) or a water/2-(2-butoxyethoxy) ethanol solution (DB). With typical use levels of 50-500ppm, it is effective at very...展开 Masurf® FS-630 is characterized as a 30% active C-6 Based fluoroaliphatic sodium sulfosuccinate in either a water/glycol ether solution (EB) or a water/2-(2-butoxyethoxy) ethanol solution (DB). With typical use levels of 50-500ppm, it is effective at very low concentrations, and together with traditional hydrocarbon surfactants, can contribute properties not possible with either material alone. This product is a superior surface tension and interfacial tension reduction agent for wetting and leveling performance unobtainable with silicone, acetylenic or traditional hydrocarbon surfactants. The superior wetting performance of Masurf® FS-630 results in improved film uniformity in floor finishes, water-based coatings, and as an additive in fiber finishes. 收起
Masurf® UV-350 Pilot Chemical Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and h...展开 Masurf® UV-350 is an Ultraviolet Light Absorber for non-polar, hydrocarbon solvent systems, designed to impart UV protection to fabrics and hard surfaces. Utilizing proven and accepted benzotriazole UV absorber chemistry, this product is easy to use and highly efficient, because it is applied from a solution. Masurf® UV-350 is readily dissolvable in hydrocarbon solvents which provides a uniform coverage compared to other UV absorbers that form unstable, large particle size dispersions and yield non-uniform surface coverage. Unlike aqueous based UV absorbers, this product is not water soluble, so it will not readily wash off exterior surfaces. 收起
ASC Automatic Sample Changer Anton Paar Viscosity & Rheology 该ASC样品自动进样系统可一次同时全自动测量32个样品,包括测量系统的清洗。可按照实验室质量和精度进行质量控制和全流变学分析。
FRS1600 Furnace Rheometer System Anton Paar Viscosity & Rheology 日常生活中所使用的材料,如玻璃和金属,是在超过1000 °C的条件下处理或精炼熔化的。为了确保最终产品的始终一致的高品质以及优化能源密集型的过程,懂得熔体粘度是非常重要的。该熔炉流变仪系统(FRS 1600)结合流变仪和实验室火炉可测量超过1600 °C。
High-Throughput Rheometer HTR 301 Anton Paar Viscosity & Rheology HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的,同时由一个机器人控制所有其他项目的测量。
Lovis 2000 M/ME Rolling-Ball Viscometer Anton Paar Viscosity & Rheology Lovis 2000 M/ME是一款滚球式粘度计,通过透明或不透明的液体根据Hoepple的落球原则计算球的滚动时间。该方法只需要400微升的液体。结果可通过运动学粘度和动力学粘度呈现。该粘度计简洁经济,可节省实验室的空间。是Anton Paar’s AMVn自动粘度计的更新版本。
MCR Rheometer Series Anton Paar Viscosity & Rheology 该新的MCR流变仪拥有最新的技术。EC运动技术,低摩擦的轴承以及专利的正交力传感器经过多年的优化可满足最高的流变要求。任何类型的或组合的流变测试,转动或振动模式,都可用MCR流变仪测量。该系统的模块化设计,可适合宽广的温度范围的装置和特定程序的应用。
RheoLabQC Quality Control Rheometer Anton Paar Viscosity & Rheology RheolabQC 是一款迄今最先进的质量控制流变仪,也可用于研发。结合了无与伦比的性能,易于操作以及稳健设计于一身。可执行从单点快速检查流动曲线到屈服点确定等一系列复杂的流变控制。
RheoPlus Rheometer Software Anton Paar Viscosity & Rheology 易于使用,灵活且功能强大 - RheoPlus软件用于所有Anton Paar流变仪,从质量控制仪器到高通量的流变仪。不同用户可轻松切换方法模块以及测量数据。该迄今为止最先进的软件可提供大量的模板,自动测量以及在RheoManager上处理数据,一个LIM/SAP界面,和21 CFR 的11章的兼容。
Rheometer Measuring Head Anton Paar Viscosity & Rheology 具有MCR流变仪性能的自定义流变测量仪器。其流变测量头可用于自动化操作或超过实验室流变仪要求的其他特殊测量目的。是工艺联合或建立自定义流变仪系统的完美方案。该模块装置包含一个配备有知名马达的测量头以及MCR系列的空气轴承,还有一个单独的控制单元。