| Cimsil A35 | Tolsa, S.A. | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展開 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| Cimsil C22 | Tolsa, S.A. | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
| Cimsil CT1 | Tolsa, S.A. | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| Cimsil CT2 | Tolsa, S.A. | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Cimsil D10 | Tolsa, S.A. | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
| Cimsil G30 | Tolsa, S.A. | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展開 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
| Cimsil G50 | Tolsa, S.A. | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| Fillite Standard Grades | Tolsa, S.A. | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展開 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| Fillite White / High-Alumina Grades | Tolsa, S.A. | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展開 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
| Microsil 100 | Tolsa, S.A. | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展開 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 100S | Tolsa, S.A. | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展開 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200 | Tolsa, S.A. | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展開 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200S | Tolsa, S.A. | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展開 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Pangel AD | Tolsa, S.A. | Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets,...展開 Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. 收起 | |
| Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展開 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
| Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展開 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
| Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展開 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
| Pangel M100 | Tolsa, S.A. | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...展開 Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. 收起 | |
| Pangel M150 | Tolsa, S.A. | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...展開 Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. 收起 | |
| Pangel M280 | Tolsa, S.A. | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...展開 Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. 收起 | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展開 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
| Pangel S9 | Tolsa, S.A. | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...展開 Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. 收起 | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...展開 Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展開 Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Surfadol® 331 Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 331 is a 80% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 8-11. Silicone free, APEO free. | |
| Surfadol® 333 Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named...展開 Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named Surfadol® 333W. 收起 | |
| Surfadol® 333W Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME 艾克米 | 一種乙氧化潤濕劑和分子消泡劑（100%活性液體﹔HLB：4）。性能類似於Surfadol 541，在水性涂料、油墨和膠粘劑體系中具有改善的操作性 | |
| Surfadol® 440 Surfactant | ACME 艾克米 | 一種乙氧化低起泡潤濕劑（100%活性液體﹔HLB：8）。Surfadol 440表面活性劑可提供低泡沫動態和靜態表面張力下降，具有改善的分散性，易添加用於水性涂料、油墨和膠粘劑體系 | |
| Surfadol® 465 Surfactant | ACME 艾克米 | 一種乙氧化低起泡潤濕劑（100%活性液體﹔HLB：13）。Surfadol 465是一種乙氧化炔屬二醇，可提供低起泡性，降低表面張力並提高在水性涂料、油墨和膠粘劑體系中的溶解性和相容性 | |
| Surfadol® 518 | ACME 艾克米 | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...展開 Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 520 | ACME 艾克米 | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...展開 Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 532 | ACME 艾克米 | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...展開 Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 532B | ACME 艾克米 | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME 艾克米 | 炔屬二醇表面活性劑，具有多種優點，包括潤濕和泡沫控制，適用於水性體系。100%活性固體 | |
| Surfadol® 541E Surfactant | ACME 艾克米 | 炔屬二醇表面活性劑，具有多種優點，包括潤濕和泡沫控制，適用於水性體系。50%活性液體，乙二醇稀釋 | |
| Surfadol® 541H Surfactant | ACME 艾克米 | 炔屬二醇表面活性劑，具有多種優點，包括潤濕和泡沫控制，適用於水性體系。75%活性液體，乙二醇稀釋 | |
| Surfadol® 541PA Surfactant | ACME 艾克米 | 炔屬二醇表面活性劑，具有多種優點，包括潤濕和泡沫控制，適用於水性體系。50%活性液體，異丙醇稀釋 | |
| Surfadol® 550 | ACME 艾克米 | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...展開 Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® 550P | ACME 艾克米 | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...展開 Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. 收起 | |
| Surfadol® DF-59 | ACME 艾克米 | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...展開 Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. 收起 | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...展開 TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. 收起 |
