| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展開 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展開 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展開 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展開 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展開 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展開 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展開 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展開 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起 | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展開 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展開 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展開 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起 | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展開 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起 | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展開 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| Dynoadd® D-960 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...展開 Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® D-962 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...展開 Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® D-963 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...展開 Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® F-1 | Dynoadd by Dynea 太尔化工 | Dynoadd F-1是一種用於溶劑型涂料的一般用途的流動性、流平和抗縮孔添加劑。它可以降低涂料配方的表面張力，從而提高基材的潤濕性，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-100 | Dynoadd by Dynea 太尔化工 | Dynoadd F-100是一種流動性和潤濕添加劑，與溶劑型涂料的相容性高。它可以降低配方的表面張力，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-101 | Dynoadd by Dynea 太尔化工 | Dynoadd F-101是一種流平添加劑，適用於包括UV涂料在內的極性體系。它可以降低非溶劑型和溶劑型涂料的表面張力，從而提高基材的潤濕性，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-102 | Dynoadd by Dynea 太尔化工 | Dynoadd F-102是一種流動性和流平添加劑，用於溶劑型體系時具有防泡沫的特性。由於其分子量和化學組成的關系，Dynoadd F-102在流動性和消泡沫性方面做到了良好的平衡，廣泛用於各種配方。 | |
| Dynoadd® F-106 | Dynoadd by Dynea 太尔化工 | 透明塗料的防縮孔助劑，具有高DOI | |
| Dynoadd® F-113 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...展開 Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. 收起 | |
| Dynoadd® F-200 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....展開 Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. 收起 | |
| Dynoadd® F-201ND | Dynoadd by Dynea 太尔化工 | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...展開 Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. 收起 | |
| Dynoadd® F-300 | Dynoadd by Dynea 太尔化工 | Dynoadd F-300是一種可以與食品接觸的流動性和潤濕添加劑，適用於溶劑型涂料。它能夠降低配方的表面張力，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-3B | Dynoadd by Dynea 太尔化工 | Dynoadd F-3B是一種可以與食品接觸的流動性和抗縮孔添加劑，適用於溶劑型涂料。它能夠降低配方的表面張力，提高基材的潤濕性，避免縮孔、收縮和針孔等表面缺陷。 | |
| Dynoadd® F-404 | Dynoadd by Dynea 太尔化工 | Dynoadd F-404是一種硅氧烷改性流動性和流平添加劑，可以有效地控制溶劑型涂料的表面張力，用於噴涂涂料時具有出色的流動性、流平性和抗過噴縮孔的性能。 | |
| Dynoadd® F-409 | Dynoadd by Dynea 太尔化工 | 用於紫外固化體系的流平、流動和光澤助劑 | |
| Dynoadd® F-414 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...展開 Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. 收起 | |
| Dynoadd® F-461 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...展開 Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. 收起 | |
| Dynoadd® F-462 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-470 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-470可以減少滯留氣泡、針孔和表面氣泡。防止在生產和施工過程中產生氣泡。特別適合較厚的涂層，比如地坪涂料、使用雙組分環氧、不飽和聚脂和聚氨酯的鑄膜體系。Dynoadd® F-470對透明度沒有影響，推薦用於透明配方體系。Dynoadd® F-470還有低量的氟聚合物。 | |
| Dynoadd® F-601 | Dynoadd by Dynea 太尔化工 | Dynoadd F-601是一種用於水性配方的基材潤濕和流平添加劑。添加Dynoadd F-601后可以提高基材的潤濕性、流動性和流平性。避免或最大限度地減少縮孔、針孔、白點和其它表面缺陷。 | |
| Dynoadd® F-606 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...展開 Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. 收起 | |
| Dynoadd® F-608 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...展開 Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. 收起 | |
| Dynoadd® F-701B | Dynoadd by Dynea 太尔化工 | DYNOADD® F -701B是一種高效聚合物添加劑，對空氣釋放和抗氣泡特別有效。它可控制溶劑型塗料的表面張力。少量添加即有助於提高流動性，減少表面缺陷，例如縮孔、桔皮和針孔。該產品與許多蠟乳液具有良好的相容性，用於高蠟含量塗料中具有良好的性能。DYNOADD® F -701B可以結合Dynoadd®流動添加劑，特別是Dynoadd ®F -101使用。 | |
| Dynoadd® F-705 | Dynoadd by Dynea 太尔化工 | Dynoadd F-705是一種高效的防泡沫非硅樹脂聚合濃縮物，用於溶劑型和UV配方。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。對涂料外觀沒有消極影響。 | |
| Dynoadd® F-706 | Dynoadd by Dynea 太尔化工 | Dynoadd F-706是一種非硅樹脂聚合型防泡沫和脫氣添加劑。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。對涂料外觀沒有消極影響。 | |
| Dynoadd® F-707 | Dynoadd by Dynea 太尔化工 | Dynoadd F-707是一種用於溶劑型涂料的非硅樹脂聚合型防泡沫添加劑。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。它可以控制溶劑型體系的表面張力。少量添加有助於提高流動性，減少縮孔和桔皮等表面缺陷。 | |
| Dynoadd® F-711 | Dynoadd by Dynea 太尔化工 | 消泡劑和脫氣劑，適用於修補漆和一般工業漆 | |
| Dynoadd® F-713 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-713可以減少VOC為零或很低的配方體系中的滯留氣泡、針孔和表面氣泡。特別適合較厚的涂層，比如地坪涂料、使用雙組分環氧、不飽和聚脂和聚氨酯的鑄膜體系。Dynoadd® F-713可能減少涂膜的透明性。 | |
| Dynoadd® F-760 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...展開 Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. 收起 | |
| Dynoadd® F-800 | Dynoadd by Dynea 太尔化工 | DYNOADD® F -800是一種多官能團、附著力促進流動和流平劑。它改性塗料表面，大大改善對聚氨酯泡的吸附。作為一種有效的流動和流平添加劑，該產品可控制塗層表面張力，從而消除表面缺陷如橘皮、縮孔和針孔。DYNOADD® F -800對基材和顏料潤濕上也有積極作用。 | |
| Dynoadd® F-802 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...展開 Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. 收起 | |
| Dynoadd® F-810 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...展開 Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. 收起 | |
| Dynoadd® P-506 | Dynoadd by Dynea 太尔化工 | Dynoadd P-506是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為6微米。 | |
| Dynoadd® P-510 | Dynoadd by Dynea 太尔化工 | Dynoadd P-510是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為10微米。 | |
| Dynoadd® P-515 | Dynoadd by Dynea 太尔化工 | Dynoadd P-515是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為15微米。 | |
| Dynoadd® P-520 | Dynoadd by Dynea 太尔化工 | Dynoadd P-520是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為20微米。 | |
| Dynoadd® P-530 | Dynoadd by Dynea 太尔化工 | Dynoadd P-530是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為30微米。 | |
| Dynoadd® P-540 | Dynoadd by Dynea 太尔化工 | Dynoadd® P-540是一種單分散、球型顆粒添加劑，能夠產生細而均勻的塗膜紋理。粒子具有極窄的粒度分布，以確保每一個顆粒都能發揮應有的效果，因而比其它競爭技術降低了添加量。它們可以改善抗刮擦性，並賦予永久的滑爽度。Dynoadd® P-540具有40微米的粒度。 所述顆粒可用於溶劑型、水性和光固化塗料配方中。典型的應用是卷材塗料、家用電器、化妝品包裝、手機、汽車內飾、機械外殼、木器塗料以及光學塗層。 | |
| Dynoadd® R-1001 | Dynoadd by Dynea 太尔化工 | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...展開 Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. 收起 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展開 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展開 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展開 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Polyamide Resin Alcohol Soluble PA-010 | Briture Co., Ltd. | Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展開 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起 | |
| Polyamide Resin Co-Solvent Soluble | Briture Co., Ltd. | Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展開 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展開 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| Thermoplastic Solid Acrylic Resin BA-66 | Briture Co., Ltd. | Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展開 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起 | |
| Titanium Dioxide Anatase BA-01 | Briture Co., Ltd. | Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints. | |
| Titanium Dioxide Rutile BR-889 | Briture Co., Ltd. | Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展開 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起 | |
| Tri Isobutyl Phosphate 99%min | Briture Co., Ltd. | Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink. | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
