| BLUESIL THIXO ADD 22646 | Elkem Silicones | BLUESIL THIXO ADD 22646 is a unique liquid additive that can be used with some of the polyaddition and polycondensation cure moldmaking compounds. BLUESIL THIXO ADD 22646 is used to impart a non-flowing consistency allowing the compound to be brushed or t...展開 BLUESIL THIXO ADD 22646 is a unique liquid additive that can be used with some of the polyaddition and polycondensation cure moldmaking compounds. BLUESIL THIXO ADD 22646 is used to impart a non-flowing consistency allowing the compound to be brushed or troweled onto a model ~ changing the rheology from a flowable liquid to a non-slumping paste, while maintaining the excellent rubber properties of the base material. 收起 | |
| BLUESIL V-1062 A | Elkem Silicones | BLUESIL V-1062 A is a high strength, two-component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 14 Durometer (Shore A), very pourable rubber providing excellent physical properties, long library life, and excellent detail rep...展開 BLUESIL V-1062 A is a high strength, two-component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 14 Durometer (Shore A), very pourable rubber providing excellent physical properties, long library life, and excellent detail reproduction. BLUESIL V-1062 can also be used in vacuum demolding. 收起 | |
| BLUESIL V-1067 A | Elkem Silicones | BLUESIL V-1067 A is a high performance, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 40 Shore A, flowable rubber providing good physical properties, excellent dimensional stability and very low shrinkage. BLUESI...展開 BLUESIL V-1067 A is a high performance, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 40 Shore A, flowable rubber providing good physical properties, excellent dimensional stability and very low shrinkage. BLUESIL V-1067 is an excellent choice for prototype tooling applications. 收起 | |
| BLUESIL V-1069 | Elkem Silicones | BLUESIL V-1069 is a high strength, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 30 Shore A, thixotropic (non-sag) rubber providing excellent physical properties and long library life. Blending of BLUESIL V-1069 ...展開 BLUESIL V-1069 is a high strength, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 30 Shore A, thixotropic (non-sag) rubber providing excellent physical properties and long library life. Blending of BLUESIL V-1069 with BLUESIL V-1062 or BLUESIL V-1065 provides a unique variety of brush-on coating blends to suit the needs of many applications in the museum, architectural restoration field, theme park and the film industries. 收起 | |
| BLUESIL V-243 A | Elkem Silicones | Bluesil V-243 A is a two component, high strength, addition cure, silicone requiring a heat cure to obtain optimum properties. The long work life, high strength properties, and its ability to accept high levels of silicone diluent fluid, make it an excell...展開 Bluesil V-243 A is a two component, high strength, addition cure, silicone requiring a heat cure to obtain optimum properties. The long work life, high strength properties, and its ability to accept high levels of silicone diluent fluid, make it an excellent choice for transfer print pad applications. Bluesil V-243 is also an excellent product for roll applications. 收起 | |
| BLUESIL V-249 A | Elkem Silicones | Bluesil V-249 A is a two component, addition cure, heat curing silicone rubber compound. It is designed specifically for use as converter and embossing rolls. The long work life, high Shore A (67) hardness, and high strength properties make it an excellen...展開 Bluesil V-249 A is a two component, addition cure, heat curing silicone rubber compound. It is designed specifically for use as converter and embossing rolls. The long work life, high Shore A (67) hardness, and high strength properties make it an excellent choice for many types of roll applications. Additives such as silicone diluent and color pigments may be added to obtain special features for specific applications. Bluesil V-249 may be meter mixed and dispensed, or hand poured 收起 | |
| BLUESIL V-330 | Elkem Silicones | Bluesil V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent re...展開 Bluesil V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. Bluesil V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL V-340 | Elkem Silicones | Bluesil V-340 is a two component, addition reaction, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellen...展開 Bluesil V-340 is a two component, addition reaction, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. Bluesil V-340 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL VICURE 2 | Elkem Silicones | BLUESIL VICURE 2 is a Stannous Octoate tin complex. It is a cure accelerator when used in conjunction with a Condensation base and Catalyst combination. | |
| BLUESIL VRM-65 A | Elkem Silicones | BLUESIL VRM-65 is a sprayable or brushable thixotropic moldmaking silicone RTV designed as a 10:1 cure system with high strength rubber properties. | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展開 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展開 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展開 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展開 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Kamin® 2000C | KaMin Solutions | KaMin產品中白度最高的一種，顆粒最細，煅燒高嶺粘土。它具有高吸油量和需水量。易添加入溶劑型和水性涂料和油墨中，其中它可提供光澤控制和最大的TiO2填充性、著色力和亮度（白度）。典型的應用：油墨和平光建筑漆 | |
| Kamin® 35 | KaMin Solutions | 通用型，中等白度，粗粒徑填料，具有低油和水需求量。它主要用於膠粘劑、涂料、油墨或著重需要低基料含量的體系。它可為涂料和油墨提供不吸墨性、阻隔性，降低光澤並最小程度增加粘度。它適用於溶劑型、不含溶劑的和水性體系 | |
| Kamin® 35B | KaMin Solutions | 通用型，中等白度，粗粒徑填料，具有低油和水需求量。它主要用於水性膠粘劑、涂料、油墨或著重考慮低表面積的體系。 | |
| Kamin® 70C | KaMin Solutions | KaMin 70C是一種高白度、中等粒徑、煅燒高嶺土，具有中等吸油量和需水量。KaMin 70C易添加入溶劑型和水性涂料中，它可為TiO2提供填充性、亮度（白度）、耐擦洗性和光澤控制。KaMin 70C是工業種廣為應用的產品，典型的應用：平光和低光建筑涂料 | |
| Kamin® 80 | KaMin Solutions | 經濟合算的通用型水洗高嶺土，具有中等白度。適用於水性、溶劑型和無溶劑油墨 | |
| Kamin® 80 | KaMin Solutions | KaMin 80是一種經濟合算的通用型水洗高嶺土，具有中等白度。它適合水性、溶劑型和無溶劑油漆、油墨和膠粘劑應用 | |
| Kamin® 80B | KaMin Solutions | KaMin 80B是一種經濟合算的通用型水洗高嶺土，具有中等白度。它適合水性漆、油墨和膠粘劑應用 | |
| Kamin® 80B | KaMin Solutions | Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications. | |
| Kamin® 90 | KaMin Solutions | 細顆粒高嶺粘土，用於溶劑型和水性油墨填充劑。碾磨成粉末狀 | |
| Kamin® HG | KaMin Solutions | KaMin HG高嶺土是一種經濟合算的通用型水洗高嶺土，具有細顆粒粒徑和中等白度。適合水性漆、油墨和膠粘劑應用 | |
| Kamin® HG90 | KaMin Solutions | Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where hig...展開 Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. It has the physical form of spray dried beads or slurry. 收起 | |
| Lithosperse® 7005 CS | KaMin Solutions | 經處理的高嶺粘土，應用於漿狀油墨具有出色的流變性，作為杰出的印刷不起霧解決方案。該處理使碳氫體系不經碾磨即可快速分散，可控制穩定潤版液的水粘附 | |
| Lithosperse® NextGen | KaMin Solutions | Lithosperse® NextGen is a surface enhanced clay for use in heat-set and sheet-fed inks. It is designed to replace ink resin and ink oil with minimal impact on key ink properties such as ink gloss and ink density. | |
| Polyamide Resin Alcohol Soluble PA-010 | Briture Co., Ltd. | Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展開 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起 | |
| Polyamide Resin Co-Solvent Soluble | Briture Co., Ltd. | Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展開 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起 | |
| Polygloss® 90 | KaMin Solutions | Polygloss 90是一種超細粒徑、高白度高嶺土，可為水性和溶劑型涂料和油墨提供易分散性，增加光澤。Polygloss 90特制高嶺土通過有效的TiO2填充可增加遮蓋率。相比普通填充顏料，Polygloss 90可提供更高的臨界顏料體積濃度（PVC)值，而不降低光澤，且最小程度地影響粘度 | |
| Polyplate® P | KaMin Solutions | Polyplate P是一種高白度、層狀粘土，適用於乳膠漆、水性苯胺油墨、水性膠粘劑或需要增加的遮蔽率、著色力和保留能力的水性體系 | |
| Polyplate® P01 | KaMin Solutions | Polyplate P01是一種碾磨的高白度大粒徑層狀高嶺土，適用於溶劑型和水性涂料、油墨和膠粘劑。大板狀顆粒的高長徑比可提供增加的著色力、漆保留能力和抗裂性 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展開 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展開 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE® 430 | Elkem Silicones | SILCOLAPSE® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many application...展開 SILCOLAPSE® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many applications in industry and food. 收起 | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展開 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展開 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展開 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mec...展開 SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. 收起 | |
| Thermoplastic Solid Acrylic Resin BA-66 | Briture Co., Ltd. | Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展開 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起 | |
| Titanium Dioxide Anatase BA-01 | Briture Co., Ltd. | Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints. | |
| Titanium Dioxide Rutile BR-889 | Briture Co., Ltd. | Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展開 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起 | |
| Tri Isobutyl Phosphate 99%min | Briture Co., Ltd. | Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink. |
