| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| A-100 Anatase Titanium Dioxide | Pangang Group Chengdu Titanium Trading Co., Ltd. | A-100 Anatase Titanium Dioxide is a multipurpose antase titanium dioxide pigment. This product gives good color and brightness, gloss retention, opacity and a bluish undertone. A-100 Anatase Titanium Dioxide is used in interior industrial coatings, interi...展開 A-100 Anatase Titanium Dioxide is a multipurpose antase titanium dioxide pigment. This product gives good color and brightness, gloss retention, opacity and a bluish undertone. A-100 Anatase Titanium Dioxide is used in interior industrial coatings, interior architectural coatings, traffic paints, and printing inks. 收起 | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Adherant ADK | Elementis 海名斯特殊化学 | Adherant ADK 为增进復合油墨对 PET 材质附着性，以及溶剂型涂料对层间密着和各种塑料、金属底材的密着性的添加剂。 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...展開 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制油墨中的水粘附性。可用於平版印刷油墨 | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加劑，可控制平版印刷油墨中的水粘附性。由於它的高粘度，它對油墨幾乎沒有稀釋效果 | |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...展開 BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. 收起 | |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 流變助劑是一種通用型有機膨潤土，專門用於低至中極性脂肪烴及芳香烴塗料系統中。 | |
| BENGEL® 818 | Elementis 海名斯特殊化学 | 與傳統的有機黏土相比，BENGEL® 818 具有極佳的分散性、良好的搖變性、抗流掛性及防沉降性。它屬於超分散型，在生產過程中具有很大的靈活性。推薦用於氣幹型長油度醇酸瓷漆、聚氨酯打磨型封閉底漆、普通的工業維護系統和脂肪族系統中。 | |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 流變助劑的超分散性可大大簡化油漆系統的配製及製造。適用於有中至高極性塗料系統，如酮類、酯類、醇酯類、醚酯類、醇類。使用BENGEL® 828給油漆生產商提供了提高生產效率的機會。 | |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958流变助剂是一种易分散型有机膨润土，适用于低到中极性有机溶剂体系。提供良好的抗流挂性和防沉性能。容易分散，在生产过程中可灵活操作。推荐使用在气乾型长油醇酸瓷漆、聚氨酯体系、打印油墨、密封胶和脂肪族体系中。 | |
| BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 為超分散型有機膨潤土流變助劑，可簡化油漆系統的配製及製造。本產品具有廣泛的應用，可用於中／低至高極性溶劑塗料與油墨系統。 | |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 為一適用於中至高極性有機溶劑塗料系統與合成黏結劑系統的有機膨潤土添加劑。 | |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 為一適用於低至中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD® -1 為一適用於脂肪族及非極性到中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD® -2 為一適用於中至高極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 25%氧化聚乙烯蠟乳液，分散於TRPGDA中，用於UV固化油墨和涂料。可提供滑爽度和過渡耐磨性能，並維持原有的光澤和透明度 | |
| DAPRO® ACP-16W | Elementis 海名斯特殊化学 | DAPRO® ACP-16W 為水性密著增進劑，設計用於用增進水性塗料與油墨在聚丙烯（PP）材質上的密著效果。 | |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 為溶劑系統使用的矽酮改質液態泡沫抑制劑。在不同系統中，具有顯著的消泡性能。具有易於添加在各式溶劑塗料油墨的方便使用特點。 | |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 為一具有良好乳化性能的水性消泡劑，具有優異的消泡、抑泡效果。 | |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 高效適合用於高品質橡膠應用，且提供極佳的泡沫抑制和消泡性能。DAPRO® AP 7072 在水中極易分散。適用於建築塗料、黏合劑、乳液製備和水墨等水性系統。 | |
| DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 是用於非水性塗料的高效能添加劑，具有極佳抗沉降與抗垂流效能，特別適用於不含芳香族的塗料配方。 | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 是一高效能且不含有機矽長效型消泡劑。即使塗料長期存放後使用，仍可維持其有效的消泡性能。DAPRO® DF 1760 所含的所有非揮發性成分皆符合美國聯邦法規的藥物暨食品管理（FDA）CFR 21 175.105；175.300；176.170 與 176.180 條款的規定。 | |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. | |
| DAPRO® DF 690 | Elementis 海名斯特殊化学 | DAPRO® DF 690 is an antifoaming agent for a grinding stage or high shear stage with excellent destabilizing effect on foaming and microbubbles. It exhibits excellent durability without affecting system gloss and color rendering. | |
| DAPRO® DF 7015 | Elementis 海名斯特殊化学 | DAPRO® DF 7015是一具有良好乳化性能的水性消泡剂。特别推荐用于研磨浆料、乳胶漆和油墨 | |
| DAPRO® UW 461 | Elementis 海名斯特殊化学 | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| DAPRO® W-77 | Elementis 海名斯特殊化学 | DAPRO® W-77 表面張力調整劑可作為高表面張力與低表面張力介面間的緩衝介質，無論是用於塗層與塗層之間或是塗層與基材之間。其可有效消除或減少塗膜缺陷如：表面塗布不均、魚眼、縮孔等。DAPRO® W-77 亦可促進塗料在難以潤濕或受污染的基材表面上的均勻塗布，並提供極佳的重塗性。DAPRO® W-77 不含烷基酚乙氧基化合物與有機矽，其非揮發性成分符合美國聯邦法規之藥物暨食品管理（FDA）之 CFR 21 175.300 條款的規定。 | |
| Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F 為不含芳香族的溶劑型消泡劑，符合環保規定，廣泛用於溶劑型塗料系統。 | |
| Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 為適用於高固成份、高膜厚環氧地板塗料及絲網油墨抑泡、消泡劑。 | |
| Defom W-0506 | Elementis 海名斯特殊化学 | Defom W-0506 为一以乳化聚硅氧烷为主要成份的消泡剂产品。广泛用于水性体系的抑泡、消泡。 | |
| Defom W-082 | Elementis 海名斯特殊化学 | Defom W-082 为含疏水性粒子的矿物油系消泡剂。可提供优异的抑泡、消泡效果。 | |
| Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 is a mineral oil-based defoamer which contains hydrophobic particles. It provides excellent foam suppression and anti-foaming effect. | |
| DeuAdd MA-95 | Elementis 海名斯特殊化学 | DeuAdd MA-95 为低气味多功能胺中和剂，兼具酸硷值调节和稳定﹑促进漆膜光泽展现﹑提高罐内防腐蚀性能等。 | |
| DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 為一分散的聚乙烯蠟漿，添加時取用方便且易於分散的防沉劑。 | |
| DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P 为一分散的聚乙烯蜡浆，添加时取用方便且易于分散的防沉剂。 | |
| DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 为一预先分散在溶剂中的聚 胺蜡，能够提供颜填料在涂料体系中的防沉性，以及防流挂效果。 | |
| DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 為一締合型聚胺酯增稠劑，提供增稠、觸變等效能。 | |
| DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A 為一 締合型聚胺酯增稠劑，提供水性系統增稠、流動等效能。 | |
| DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
| DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F 為非離子締合型增稠劑(NiSAT)適用於水性系統的應用，可提供中剪切黏度並兼顧流動性，本產品設計不含錫、APEO與有機溶劑。 | |
| Disponer 904S | Elementis 海名斯特殊化学 | Disponer 904S 為特殊酸與矽酮混合的潤濕、分散劑，對防止二氧化鈦和其他顏料配用所產生的分色、浮色特具效果；並可避免產生沉積硬結。 | |
| Disponer 912 | Elementis 海名斯特殊化学 | Disponer 912 具有优异的颜料润湿分散性，可适用于溶剂型涂料及油墨中无机颜料及膨润土的润湿、分散，特别推荐使用于木器底漆中，以增进对木材导管的润湿性。 | |
| Disponer 929 | Elementis 海名斯特殊化学 | Disponer 929 是針對碳黑而發展出來的分散、展色劑，可添加在塗料內研磨；作為研磨展色劑，單獨與碳黑混合研磨分散，作成調色或著色用黑色漿。 | |
| Disponer 983 | Elementis 海名斯特殊化学 | Disponer 983 為高分子型分散劑，適用於溶劑型中極性系統碳黑及有機顏料的分散。 | |
| Disponer W-920 | Elementis 海名斯特殊化学 | Disponer W-920是一種獨特的分散助劑，可用於有機顏料、鐵氧化物顏料在水性體系中的分散 | |
| DMAE | Elementis 海名斯特殊化学 | DMAE 為一高效的胺中和劑。可作為 pH 值調整、穩定及輔助溶劑等效能。 | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 低分子量聚乙烯和聚四氟乙烯混合物。用於溶劑型和水性油墨 | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細粒徑的高分子量聚乙烯和聚四氟乙烯混合物，可為配方提供出色的耐磨性和良好的滑爽度。用於膠印、UV和鐵皮印刷油墨和套印清漆 | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 高分子量聚乙烯和聚四氟乙烯混合物，可提供較好的耐摩擦，耐磨和抗磨損性能，不提供滑爽度 | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 細微粉化，高熔點蠟合金粉末和聚四氟乙烯混合物。可增加潤滑度、硬度、抗粘連性能和抗磨損以及耐磨性能。應用於溶劑型和水性油墨中 | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 穩定的50%微粉化聚四氟乙烯乳液，用於通用型平版印刷油墨體系。用於熱固平版印刷油墨。可結合聚乙烯提高抗磨損性能 | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| GarLAS 16/50 | Ganga Rasayanie (Pvt) Ltd | GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 1924 | Ganga Rasayanie (Pvt) Ltd | GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035 | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035C | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 20/40 | Ganga Rasayanie (Pvt) Ltd | GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GaroMAX™ 21/60 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, m...展開 GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 21/60A | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, ...展開 GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 4546 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, me...展開 GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, meta...展開 GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46B | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, met...展開 GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroSOL™ 100 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 110 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 155 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 160 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 180 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 300 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GrintoSOL™ 1924 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and min...展開 GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and mineral oil distillates for offset inks. 收起 |
