| Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
| Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），具有出色的柔韌性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時，展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。 | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊聚合物單體。是水溶性的，並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物，它無毒、易於處理，列於歐洲現有商業化學品目錄（EINECS）的聚合物分類 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯（環氧乙烯基酯）UV體系的出色的低收縮反應性稀釋劑 | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc. TRIMET Products Group | 產品技術指導 - 一種獨特和多用途的位阻二醇分子，具羥基和羧基官能性。 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 是一種DMPA CHDA BDO己二酸聚酯樹脂，98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。 | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Polyol HA-0135LV2是一種同時帶酸和羥基官能團的低結晶聚酯多醇。類似DMPA® Polyol HA-0135，該樹脂可消除在聚氨酯乳液生產過程中NMP作為加工溶劑的需球 | |
| Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Sylomask | Fuji Silysia Chem. Ltd. | Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive ef...展開 Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive effects than conventional anti-corrosive pigments, and the effects last longer period. There are no physical alterations on a painted film surface, because of Sylomask functioning by ion exchange to show anti-corrosive effect. Sylomask is applied to paint, ink and topcoat systems. 收起 | |
| Sylophobic | Fuji Silysia Chem. Ltd. | Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade ...展開 Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade includes large surface area excellent dispersion and high oil absorptivity. Sylophobic is a product that is used in paint and anti-blocking in plastics. It is applicable in ink and paper for printing as well as adhesives. 收起 | |
| Sylosphere | Fuji Silysia Chem. Ltd. | Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, ...展開 Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, and dispersivity characteristics are also found in Sylosphere. Sylosphere is used in plastics, paper and ink, in paints, and in cosmetics and perfume. 收起 | |
| Sylysia | Fuji Silysia Chem. Ltd. | Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resi...展開 Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resin and water-based paints, inks, plastic films, pharmaceuticals & cosmetics, adhesives, as well as sensitized, electrostatic recording, and impact paper. 收起 | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1030-60是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1030-90 是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...展開 TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. 收起 | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1230-60 是一款非晶狀飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1230-90 是一款非低黏度飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展開 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展開 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展開 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展開 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| Verdcol® BML Carmine 176 T | Verdcol Ltd | Verdcol® BML Carmine 176 T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 77-82 g/100g and a density of 1.4-1.5 g/cm3. It is used in both water and solvent based inks. | |
| Verdcol® BML Carmine 185 2T | Verdcol Ltd | Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent...展開 Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 3T | Verdcol Ltd | Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitabilit...展開 Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 T | Verdcol Ltd | Verdcol® BML Yellow 180 T is a mid-green shade and semi-opaque yellow pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® DL Yellow 12 S | Verdcol Ltd | Verdcol® DL Yellow 12 S is a mid-red shade yellow pigment with high gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 13 GP | Verdcol Ltd | Verdcol® DL Yellow 13 GP is a mid shade yellow pigment. This product has an oil absorption of <55 g/100g and a density of 1.3-1.5 g/cm3. It can be used in solvent based inks. | |
| Verdcol® DL Yellow 13 S | Verdcol Ltd | Verdcol® DL Yellow 13 S is a mid shade yellow pigment with high gloss and transparency. This product has an oil absorption of <50 g/100g and a density of 1.3-1.5 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 GP | Verdcol Ltd | Verdcol® DL Yellow 14 GP is a mid-green shade yellow pigment. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It can be used in water based inks and solvent based inks. | |
| Verdcol® DL Yellow 14 S | Verdcol Ltd | Verdcol® DL Yellow 14 S is a mid-green shade yellow pigment with high gloss and transparency. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 SWK | Verdcol Ltd | Verdcol® DL Yellow 14 SWK is a mid-green shade yellow pigment with good transparency and gloss. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 17 S | Verdcol Ltd | Verdcol® DL Yellow 17 S is a green shade yellow pigment with good gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 S | Verdcol Ltd | Verdcol® DL Yellow 83 S is a strong red shade yellow pigment with good gloss and flow. This product has an oil absorption of <45 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DPP Red 254 PTR | Verdcol Ltd | Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative c...展開 Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Pink 122 GP | Verdcol Ltd | Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial...展開 Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Red 169 W | Verdcol Ltd | Verdcol® Red 169 W is a bright pink pigment with high transparency. This product has an oil absorption of 100-105 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Red 81 S | Verdcol Ltd | Verdcol® Red 81 S is a bright pink color with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® Red 81 W | Verdcol Ltd | Verdcol® Red 81 W is a bright pink pigment with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Violet 27 W | Verdcol Ltd | Verdcol® Violet 27 W is an economical pigment with good flow stability. This product has an oil absorption of 45-55 g/100g and a density of 1.6-1.7 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Violet 3 S | Verdcol Ltd | Verdcol® Violet 3 S is a brilliant red pigment with high transparency. This product has an oil absorption of 65-75 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® Violet 3 W | Verdcol Ltd | Verdcol® Violet 3 W is a brilliant and red shade pigment with transparent qualities. This product has an oil absorption of 65-75 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
| White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. |
