| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展開 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展開 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展開 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展開 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展開 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展開 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展開 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展開 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展開 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展開 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展開 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展開 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TPO | Eutec Chemical Co., Ltd. | Photocure TPO is a clear solution yellow crystalline powder of 2,4,6-trimethylbenzoyldiphenylphosphine oxide with a melting point between 87-93℃. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TPO-L | Eutec Chemical Co., Ltd. | Photocure TPO-L is a clear solution yellow liquid of Ethyl (2,4,6-trimethylbenzoyl)phenylphosphinate. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TZT | Eutec Chemical Co., Ltd. | Photocure TZT (2,4,6-Trimethylbenzophenone Methyl benzophenone Benzophenone) is a pale yellow odorless liquid. This product is used as a photoinitiator in UV-cured resins, inks and coatings. | |
| Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
| Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 | |
| Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展開 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展開 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展開 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展開 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展開 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展開 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展開 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展開 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展開 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展開 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展開 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展開 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展開 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...展開 STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. 收起 | |
| Sylomask | Fuji Silysia Chem. Ltd. | Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive ef...展開 Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive effects than conventional anti-corrosive pigments, and the effects last longer period. There are no physical alterations on a painted film surface, because of Sylomask functioning by ion exchange to show anti-corrosive effect. Sylomask is applied to paint, ink and topcoat systems. 收起 | |
| Sylophobic | Fuji Silysia Chem. Ltd. | Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade ...展開 Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade includes large surface area excellent dispersion and high oil absorptivity. Sylophobic is a product that is used in paint and anti-blocking in plastics. It is applicable in ink and paper for printing as well as adhesives. 收起 | |
| Sylosphere | Fuji Silysia Chem. Ltd. | Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, ...展開 Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, and dispersivity characteristics are also found in Sylosphere. Sylosphere is used in plastics, paper and ink, in paints, and in cosmetics and perfume. 收起 | |
| Sylysia | Fuji Silysia Chem. Ltd. | Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resi...展開 Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resin and water-based paints, inks, plastic films, pharmaceuticals & cosmetics, adhesives, as well as sensitized, electrostatic recording, and impact paper. 收起 | |
| Verdcol® BML Carmine 176 T | Verdcol Ltd | Verdcol® BML Carmine 176 T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 77-82 g/100g and a density of 1.4-1.5 g/cm3. It is used in both water and solvent based inks. | |
| Verdcol® BML Carmine 185 2T | Verdcol Ltd | Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent...展開 Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 3T | Verdcol Ltd | Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitabilit...展開 Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 T | Verdcol Ltd | Verdcol® BML Yellow 180 T is a mid-green shade and semi-opaque yellow pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® DL Yellow 12 S | Verdcol Ltd | Verdcol® DL Yellow 12 S is a mid-red shade yellow pigment with high gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 13 GP | Verdcol Ltd | Verdcol® DL Yellow 13 GP is a mid shade yellow pigment. This product has an oil absorption of <55 g/100g and a density of 1.3-1.5 g/cm3. It can be used in solvent based inks. | |
| Verdcol® DL Yellow 13 S | Verdcol Ltd | Verdcol® DL Yellow 13 S is a mid shade yellow pigment with high gloss and transparency. This product has an oil absorption of <50 g/100g and a density of 1.3-1.5 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 GP | Verdcol Ltd | Verdcol® DL Yellow 14 GP is a mid-green shade yellow pigment. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It can be used in water based inks and solvent based inks. | |
| Verdcol® DL Yellow 14 S | Verdcol Ltd | Verdcol® DL Yellow 14 S is a mid-green shade yellow pigment with high gloss and transparency. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 SWK | Verdcol Ltd | Verdcol® DL Yellow 14 SWK is a mid-green shade yellow pigment with good transparency and gloss. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 17 S | Verdcol Ltd | Verdcol® DL Yellow 17 S is a green shade yellow pigment with good gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 S | Verdcol Ltd | Verdcol® DL Yellow 83 S is a strong red shade yellow pigment with good gloss and flow. This product has an oil absorption of <45 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DPP Red 254 PTR | Verdcol Ltd | Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative c...展開 Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Pink 122 GP | Verdcol Ltd | Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial...展開 Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Red 169 W | Verdcol Ltd | Verdcol® Red 169 W is a bright pink pigment with high transparency. This product has an oil absorption of 100-105 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Red 81 S | Verdcol Ltd | Verdcol® Red 81 S is a bright pink color with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® Red 81 W | Verdcol Ltd | Verdcol® Red 81 W is a bright pink pigment with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Violet 27 W | Verdcol Ltd | Verdcol® Violet 27 W is an economical pigment with good flow stability. This product has an oil absorption of 45-55 g/100g and a density of 1.6-1.7 g/cm3. It is primarily used in water based inks. |
