| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），具有出色的柔韌性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時，展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。 | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊聚合物單體。是水溶性的，並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物，它無毒、易於處理，列於歐洲現有商業化學品目錄（EINECS）的聚合物分類 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯（環氧乙烯基酯）UV體系的出色的低收縮反應性稀釋劑 | |
| Changtai Micro Powder Wax KM1104 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1104 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1104 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM1137 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1137 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1137 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM1204 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1204 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1204 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM1237 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1237 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1237 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM2106 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2106 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2106 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2110 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2110 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2110 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2110F | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2110F is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-ba...展開 Changtai Micro Powder Wax KM2110F is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2117 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2117 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2117 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2206 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2206 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2206 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2217 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2217 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2217 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc. TRIMET Products Group | 產品技術指導 - 一種獨特和多用途的位阻二醇分子，具羥基和羧基官能性。 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 是一種DMPA CHDA BDO己二酸聚酯樹脂，98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。 | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Polyol HA-0135LV2是一種同時帶酸和羥基官能團的低結晶聚酯多醇。類似DMPA® Polyol HA-0135，該樹脂可消除在聚氨酯乳液生產過程中NMP作為加工溶劑的需球 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| KR-120 | Changsha Creature Industry Co., Ltd. | KR-120 is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-120A | Changsha Creature Industry Co., Ltd. | KR-120A is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-120B | Changsha Creature Industry Co., Ltd. | KR-120B is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-120W | Changsha Creature Industry Co., Ltd. | KR-120W is a polyketone resin that is in the form of light yellow grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-130 | Changsha Creature Industry Co., Ltd. | KR-130 is a polyketone resin that is in the form of light yellow grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-80F | Changsha Creature Industry Co., Ltd. | KR-80F is a polyketone resin that is in the form of a light yellow block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-A101 | Changsha Creature Industry Co., Ltd. | KR-A101 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, mo...展開 KR-A101 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, modified resins, and other systems as a special hard resin. 收起 | |
| KR-A81 | Changsha Creature Industry Co., Ltd. | KR-A81 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, mod...展開 KR-A81 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, modified resins, and other systems as a special hard resin. 收起 | |
| NW-100 | Naewoi Korea Resins | NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high te...展開 NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high temperature baking systems, vinyl, acrylic and NC lacquer coatings, air drying chlorinated rubber systems, and epoxy air drying systems. 收起 | |
| NW-580 | Naewoi Korea Resins | NW-580 is a wetting and dispersing additive for water-based, solvent-borne, and solvent-free systems. Its main component is unsaturated polycarboxylic acid copolymer. It reduces the viscosity in products and also has anti-floating and anti-flooding proper...展開 NW-580 is a wetting and dispersing additive for water-based, solvent-borne, and solvent-free systems. Its main component is unsaturated polycarboxylic acid copolymer. It reduces the viscosity in products and also has anti-floating and anti-flooding properties . NW-580 is used in high concentration tinter, general industrial coating systems, automotive refinish coating systems, inks, marine and heavy duty coatings, and PCM and coil coatings. 收起 | |
| NW-6380H | Naewoi Korea Resins | NW-6380H is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty polymer. It has high concentration tinter and wetting and dispersing effect for organic or inorganic pigments, and also is useful a...展開 NW-6380H is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty polymer. It has high concentration tinter and wetting and dispersing effect for organic or inorganic pigments, and also is useful as a carbon black tinter. NW-6350 is used in general industrial coating systems, automotive coating systems, high concentration tinter and inks, coil and PCM coating systems. 收起 | |
| NW-950 | Naewoi Korea Resins | NW-950 is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty copolymer. It is serves as a wetting and dispersing additive for PVC Sol and PU foam and also in pigment concentrates in polyol, plas...展開 NW-950 is a wetting and dispersing additive for organic solvent systems. Its main component is a high molecular specialty copolymer. It is serves as a wetting and dispersing additive for PVC Sol and PU foam and also in pigment concentrates in polyol, plasticizer, and unsaturated polyester. NW-950 is used in automotive and refinish coating systems, general industrial systems, high concentration tint and ink, and coil coatings. 收起 | |
| Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1030-60是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1030-90 是一款非結晶、低黏度飽和線性聚脂多元醇，專門為聚氨酯基涂料、膠粘劑和泡沫配方體系設計。其疏水彈性結構，使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids ...展開 TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. 收起 | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1230-60 是一款非晶狀飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc. TRIMET Products Group | Tri-Rez 1230-90 是一款非低黏度飽和線性聚脂多元醇，專門為聚氨酯體系涂料、膠粘劑和泡沫設計。其疏水彈性結構使其成為配制高固體份水基聚氨酯樹脂的理想多元醇。 | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
