| A65 Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construc...展開 A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construction, and paper industries, ect. A65 can be used to provide excellent external and internal lubrication in most plastic processes. 收起 | |
| Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
| BIT-10 | Dalian Bio-Chem Co., Ltd. | BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1. | |
| BIT-20 | Dalian Bio-Chem Co., Ltd. | BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| CIT/MIT-14M | Dalian Bio-Chem Co., Ltd. | CIT/MIT-14M is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paints, adhesives, inks, and dyes. This product is not combustible and is VOC-free. | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Decoflux DP 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids conte...展開 Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content...展開 Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展開 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展開 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...展開 Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. 收起 | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展開 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| EW-160 Oxidized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | EW-160 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as sign...展開 EW-160 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as significantly improving the lubrication properties of PVC, promote palatalization and improve overall production efficiency and the mechanical strength of the article. 收起 | |
| EW-180 Oxidized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | EW-180 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as sign...展開 EW-180 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as significantly improving the lubrication properties of PVC, promote palatalization and improve overall production efficiency and the mechanical strength of the article. 收起 | |
| Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| Granicer 7030 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete sur...展開 Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete surface of the tiles. It can be used in the fields of engraving and digital printing. This product is miscible in water. 收起 | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| Hydrogenated Castor Oil HCO | Changxing Xiehe Polymer Co., Ltd. | Hydrogenated castor oil (HCO) is made from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other...展開 Hydrogenated castor oil (HCO) is made from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other industries. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| MAW-6600 Micronized Polyamine Wax Powder | Changxing Xiehe Polymer Co., Ltd. | MAW-6600 micronized polyamine wax powder is used in solvent-base coating, ink and adhesive. It could improve the scratch resistance of paints and used as coatings’ matting agent, sanding aid, additive for powder coatings, anti-blocking agent for printing ...展開 MAW-6600 micronized polyamine wax powder is used in solvent-base coating, ink and adhesive. It could improve the scratch resistance of paints and used as coatings’ matting agent, sanding aid, additive for powder coatings, anti-blocking agent for printing inks. 收起 | |
| MEW-3618 Micronized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | MEW-3618 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properti...展開 MEW-3618 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properties matting agent for paints & coatings. As well as a lubricant for plastics especially for high demanding pigment concentrates based on PE and PP (dispersing aid). 收起 | |
| MEW-3628 Micronized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | MEW-3628 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface propert...展開 MEW-3628 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properties matting agent for paints & coatings. As well as a lubricant for plastics especially for high demanding pigment concentrates based on PE and PP (dispersing aid). 收起 | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| Modified Hydrogenated Castor Oil Rheological Additive RC-HMT | Changxing Xiehe Polymer Co., Ltd. | RC-HMT is a 100% active rheological additive and is generally used for solvent based paints and coatings, adhesives, sealants and lubricant oils. It can provide excellent thickening, thixotropic and sag resistance. It is primarily used in the production o...展開 RC-HMT is a 100% active rheological additive and is generally used for solvent based paints and coatings, adhesives, sealants and lubricant oils. It can provide excellent thickening, thixotropic and sag resistance. It is primarily used in the production of industrial coatings, traffic paints, inks, powder paints, adhesive & sealants and lubricating oils. 收起 | |
| Modified Hydrogenated Castor Oil Rheological Additive RC-HST | Changxing Xiehe Polymer Co., Ltd. | RC-HST is a 100% active organic rheological additive and is made by a special process modification of solvent-based coatings. It is primarily used in the production of inks and adhesives and can effectively provide thixotropy and sag as well as resistance...展開 RC-HST is a 100% active organic rheological additive and is made by a special process modification of solvent-based coatings. It is primarily used in the production of inks and adhesives and can effectively provide thixotropy and sag as well as resistance and prevention of sedimentation. 收起 | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| RC-100 Polyamide Micro-Powder | Changxing Xiehe Polymer Co., Ltd. | RC-100 Polyamide Micro-Powder is a special polyamide wax. The product can be dispersed in the solvent and pre-activated to wax paste. It can be used as rheological additives in solvent based system. RC-100 has some advantages in viscosity control, thixotr...展開 RC-100 Polyamide Micro-Powder is a special polyamide wax. The product can be dispersed in the solvent and pre-activated to wax paste. It can be used as rheological additives in solvent based system. RC-100 has some advantages in viscosity control, thixotropic, sag control and pigment suspension. 收起 | |
| RC-200 Micronized Polyamide Wax | Changxing Xiehe Polymer Co., Ltd. | RC-200 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, ad...展開 RC-200 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, adhesives, sealants and lubricating etc. RC-200 has some advantages in viscosity control, thixotropic, sag control and pigment suspension. 收起 | |
| RC-750 Anti-Settling Agent | Changxing Xiehe Polymer Co., Ltd. | RC-750 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-750 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acry...展開 RC-750 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-750 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. According to experience, RC-750 cannot be applied to systems containing zinc-powder. 收起 | |
| RC-760 Anti-Settling Agent | Changxing Xiehe Polymer Co., Ltd. | RC-760 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-760 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acry...展開 RC-760 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-760 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. 收起 | |
| RC-800 Micronized Polyamide Wax | Changxing Xiehe Polymer Co., Ltd. | RC-800 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, ad...展開 RC-800 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, adhesives, sealants and lubricating etc. RC-800 is recommended for solvent based heavy duty paints, specifically Epoxy primers, Chlorinated rubber primers and Alkyds primers. 收起 | |
| RC-820 Polyamide Wax Paste | Changxing Xiehe Polymer Co., Ltd. | RC-820 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigmen...展開 RC-820 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigments in formulation. It is primarily used in acrylic resin paints, unsaturated polyester paints, chlorinated rubber paints, epoxy resin paints, vinyl resin paints, asphalt & tar coatings, acrylic/melamines and urethane resin paints. 收起 | |
| RC-920 Polyamide Wax Paste | Changxing Xiehe Polymer Co., Ltd. | RC-920 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigment...展開 RC-920 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigments in formulation. It is primarily used in acrylic resin paints, unsaturated polyester paints, chlorinated rubber paints, epoxy resin paints, vinyl resin paints, asphalt & tar coatings, acrylic/melamines and urethane resin paints. 收起 | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| Trucolor 206 Beige | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are s...展開 Trucolor 206 Beige is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 206 Beige S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 206 Beige S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with beige ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 207 Blue HT | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are sto...展開 Trucolor 207 Blue HT is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 209 Pink is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 209 Pink S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 209 Pink S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with pink ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the in...展開 Trucolor 210 Redbrown is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 210 Redbrown S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 210 Redbrown S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-brown ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 211 Yellow is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 211 Yellow S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 211 Yellow S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with yellow ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 217 Black is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 217 Black S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 217 Black S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with black ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored...展開 Trucolor 219 Blue is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 219 Blue S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 219 Blue S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with blue ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 236 Orange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 236 Orange S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are ...展開 Trucolor 236 Orange S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 242 White is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 242 White S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are st...展開 Trucolor 242 White S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with white ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 281 Redorange | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ...展開 Trucolor 281 Redorange is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with reddish-orange ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor 285 Green | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stor...展開 Trucolor 285 Green is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with green ink in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the ink...展開 Trucolor EF 245 is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| Trucolor EF 245 S | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks...展開 Trucolor EF 245 S is a mixture of solvent-based polymers and pigments. This product can be used to decorate tiles with transparent effects in digital printing technology. It is insoluble in water and is not frost-sensitive. It is recommended that the inks are stored at least 1 day at production temperature before usage. 收起 | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展開 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展開 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展開 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 |
