| Adherant ADK | Elementis 海名斯特殊化学 | Adherant ADK 为增进復合油墨对 PET 材质附着性，以及溶剂型涂料对层间密着和各种塑料、金属底材的密着性的添加剂。 | |
| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...展開 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 收起 | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...展開 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). 收起 | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...展開 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 收起 | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...展開 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 收起 | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...展開 Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. 收起 | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...展開 Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. 收起 | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...展開 Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. 收起 | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...展開 Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. 收起 | |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...展開 BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. 收起 | |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 流變助劑是一種通用型有機膨潤土，專門用於低至中極性脂肪烴及芳香烴塗料系統中。 | |
| BENGEL® 818 | Elementis 海名斯特殊化学 | 與傳統的有機黏土相比，BENGEL® 818 具有極佳的分散性、良好的搖變性、抗流掛性及防沉降性。它屬於超分散型，在生產過程中具有很大的靈活性。推薦用於氣幹型長油度醇酸瓷漆、聚氨酯打磨型封閉底漆、普通的工業維護系統和脂肪族系統中。 | |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 流變助劑的超分散性可大大簡化油漆系統的配製及製造。適用於有中至高極性塗料系統，如酮類、酯類、醇酯類、醚酯類、醇類。使用BENGEL® 828給油漆生產商提供了提高生產效率的機會。 | |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958流变助剂是一种易分散型有机膨润土，适用于低到中极性有机溶剂体系。提供良好的抗流挂性和防沉性能。容易分散，在生产过程中可灵活操作。推荐使用在气乾型长油醇酸瓷漆、聚氨酯体系、打印油墨、密封胶和脂肪族体系中。 | |
| BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 為超分散型有機膨潤土流變助劑，可簡化油漆系統的配製及製造。本產品具有廣泛的應用，可用於中／低至高極性溶劑塗料與油墨系統。 | |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 為一適用於中至高極性有機溶劑塗料系統與合成黏結劑系統的有機膨潤土添加劑。 | |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 為一適用於低至中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD® -1 為一適用於脂肪族及非極性到中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD® -2 為一適用於中至高極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| DAPRO® ACP-16W | Elementis 海名斯特殊化学 | DAPRO® ACP-16W 為水性密著增進劑，設計用於用增進水性塗料與油墨在聚丙烯（PP）材質上的密著效果。 | |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 為溶劑系統使用的矽酮改質液態泡沫抑制劑。在不同系統中，具有顯著的消泡性能。具有易於添加在各式溶劑塗料油墨的方便使用特點。 | |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 為一具有良好乳化性能的水性消泡劑，具有優異的消泡、抑泡效果。 | |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 高效適合用於高品質橡膠應用，且提供極佳的泡沫抑制和消泡性能。DAPRO® AP 7072 在水中極易分散。適用於建築塗料、黏合劑、乳液製備和水墨等水性系統。 | |
| DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 是用於非水性塗料的高效能添加劑，具有極佳抗沉降與抗垂流效能，特別適用於不含芳香族的塗料配方。 | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 是一高效能且不含有機矽長效型消泡劑。即使塗料長期存放後使用，仍可維持其有效的消泡性能。DAPRO® DF 1760 所含的所有非揮發性成分皆符合美國聯邦法規的藥物暨食品管理（FDA）CFR 21 175.105；175.300；176.170 與 176.180 條款的規定。 | |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. | |
| DAPRO® DF 690 | Elementis 海名斯特殊化学 | DAPRO® DF 690 is an antifoaming agent for a grinding stage or high shear stage with excellent destabilizing effect on foaming and microbubbles. It exhibits excellent durability without affecting system gloss and color rendering. | |
| DAPRO® DF 7015 | Elementis 海名斯特殊化学 | DAPRO® DF 7015是一具有良好乳化性能的水性消泡剂。特别推荐用于研磨浆料、乳胶漆和油墨 | |
| DAPRO® UW 461 | Elementis 海名斯特殊化学 | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| DAPRO® W-77 | Elementis 海名斯特殊化学 | DAPRO® W-77 表面張力調整劑可作為高表面張力與低表面張力介面間的緩衝介質，無論是用於塗層與塗層之間或是塗層與基材之間。其可有效消除或減少塗膜缺陷如：表面塗布不均、魚眼、縮孔等。DAPRO® W-77 亦可促進塗料在難以潤濕或受污染的基材表面上的均勻塗布，並提供極佳的重塗性。DAPRO® W-77 不含烷基酚乙氧基化合物與有機矽，其非揮發性成分符合美國聯邦法規之藥物暨食品管理（FDA）之 CFR 21 175.300 條款的規定。 | |
| Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F 為不含芳香族的溶劑型消泡劑，符合環保規定，廣泛用於溶劑型塗料系統。 | |
| Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 為適用於高固成份、高膜厚環氧地板塗料及絲網油墨抑泡、消泡劑。 | |
| Defom W-0506 | Elementis 海名斯特殊化学 | Defom W-0506 为一以乳化聚硅氧烷为主要成份的消泡剂产品。广泛用于水性体系的抑泡、消泡。 | |
| Defom W-082 | Elementis 海名斯特殊化学 | Defom W-082 为含疏水性粒子的矿物油系消泡剂。可提供优异的抑泡、消泡效果。 | |
| Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 is a mineral oil-based defoamer which contains hydrophobic particles. It provides excellent foam suppression and anti-foaming effect. | |
| DeuAdd MA-95 | Elementis 海名斯特殊化学 | DeuAdd MA-95 为低气味多功能胺中和剂，兼具酸硷值调节和稳定﹑促进漆膜光泽展现﹑提高罐内防腐蚀性能等。 | |
| DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 為一分散的聚乙烯蠟漿，添加時取用方便且易於分散的防沉劑。 | |
| DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P 为一分散的聚乙烯蜡浆，添加时取用方便且易于分散的防沉剂。 | |
| DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 为一预先分散在溶剂中的聚 胺蜡，能够提供颜填料在涂料体系中的防沉性，以及防流挂效果。 | |
| DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 為一締合型聚胺酯增稠劑，提供增稠、觸變等效能。 | |
| DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A 為一 締合型聚胺酯增稠劑，提供水性系統增稠、流動等效能。 | |
| DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
| DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F 為非離子締合型增稠劑(NiSAT)適用於水性系統的應用，可提供中剪切黏度並兼顧流動性，本產品設計不含錫、APEO與有機溶劑。 | |
| Disponer 904S | Elementis 海名斯特殊化学 | Disponer 904S 為特殊酸與矽酮混合的潤濕、分散劑，對防止二氧化鈦和其他顏料配用所產生的分色、浮色特具效果；並可避免產生沉積硬結。 | |
| Disponer 912 | Elementis 海名斯特殊化学 | Disponer 912 具有优异的颜料润湿分散性，可适用于溶剂型涂料及油墨中无机颜料及膨润土的润湿、分散，特别推荐使用于木器底漆中，以增进对木材导管的润湿性。 | |
| Disponer 929 | Elementis 海名斯特殊化学 | Disponer 929 是針對碳黑而發展出來的分散、展色劑，可添加在塗料內研磨；作為研磨展色劑，單獨與碳黑混合研磨分散，作成調色或著色用黑色漿。 | |
| Disponer 983 | Elementis 海名斯特殊化学 | Disponer 983 為高分子型分散劑，適用於溶劑型中極性系統碳黑及有機顏料的分散。 | |
| Disponer W-920 | Elementis 海名斯特殊化学 | Disponer W-920是一種獨特的分散助劑，可用於有機顏料、鐵氧化物顏料在水性體系中的分散 | |
| DMAE | Elementis 海名斯特殊化学 | DMAE 為一高效的胺中和劑。可作為 pH 值調整、穩定及輔助溶劑等效能。 | |
| Hypomer FX-2052 | Elementis 海名斯特殊化学 | 乾燥速度快、塑膠密著性佳、耐候性佳、對乙丁纖維素相容性佳、可用於自乾塗料 | |
| Levaslip 435 | Elementis 海名斯特殊化学 | Levaslip 435 為適用於溶劑型系統的流平劑。 | |
| Levaslip W-461 | Elementis 海名斯特殊化学 | Levaslip W-461 為適用於水性及高極性溶劑系統的平滑、耐摩擦、抗刮傷、防止貼合助劑。 | |
| Levelol 839 | Elementis 海名斯特殊化学 | Levelol 839 為不含芳香烴氟改質聚丙烯酸酯可重塗流平劑，可提供優異流平性與底材潤濕性。 | |
| Levelol W-469 | Elementis 海名斯特殊化学 | Levelol W-469 为硅酮类底材润湿剂，适用于水性体系。 | |
| NUOSPERSE® FA 196 | Elementis 海名斯特殊化学 | NUOSPERSE® FA 196 應用於有機溶劑系統的高度濃縮液體顏料分散劑。特別適用於碳黑的分散劑、熱塑性丙烯酸系統的分散劑及作為促進通用色漿在基礎醇酸塗料中進行分散的助劑。 | |
| NUOSPERSE® FX 365 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 365 用於水性系統的非離子型潤濕分散劑。具有優異的顏料潤濕與穩定性能。 | |
| NUOSPERSE® FX 600 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 600 為一高效水性顏料分散劑，可用於工業塗料、防護塗料、高光乳膠漆、色漿與印刷油墨。是一種液態多功能聚合物且不含有機溶劑。 | |
| NUOSPERSE® FX 7500W | Elementis 海名斯特殊化学 | NUOSPERSE® FX 7500W 為水性塗料及水性墨水用之潤濕分散劑。具有優異的降黏效果，同時能提高有機及無機顏料的展色力。 | |
| NUOSPERSE® FX 9200 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 9200 適用於溶劑型與無溶劑型的油墨系統，對於有機顏料與碳黑具有良好的潤濕與分散效果。 | |
| NUOSPERSE® FX 9200UV | Elementis 海名斯特殊化学 | NUOSPERSE® FX 9200UV 適用於溶劑型與無溶劑型(UV)的油墨系統，對於有機顏料與碳黑具有良好的潤濕與分散效果。 | |
| NUOSPERSE® W-22 | Elementis 海名斯特殊化学 | NUOSPERSE® W-22为一高效水性颜料润湿分散剂，可稳定颜料分散，且避免结块与粘度改变。 | |
| NUOSPERSE® W-30 | Elementis 海名斯特殊化学 | NUOSPERSE® W-30为一对环境无害的分散剂(APE - Free)，可提供各种颜料的展色性与提高产能，对于水性涂料体系的颜料分散有理想的效果，可稳定分散避免结块。 NUOSPERSE® W-30不会造成气泡生成或降低光泽度，也不影响乾燥时间、阻值或涂模硬度。在高光泽度涂料中，改善分散性的同时，可提高光泽度与鲜映性。 | |
| Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
| RHEOLATE® 1 | Elementis 海名斯特殊化学 | RHEOLATE® 1 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener with a high thickening efficiency in the medium-shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 rhe...展開 RHEOLATE® 1 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener with a high thickening efficiency in the medium-shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 rheology modifier does not impair gloss and is suitable for various waterborne paint and coating systems. 收起 | |
| RHEOLATE® 212 | Elementis 海名斯特殊化学 | RHEOLATE® 212 是一20%固含量、不含揮發性有機化合物（VOC）的水性系統用聚醚聚氨酯締合型流變助劑。它被設計使用在需要高剪切黏度和改善塗膜平坦性的乳膠漆及其它水性系統，包括油墨、紡織塗料、黏著劑以及密封劑等。RHEOLATE® 212 可以單獨使用於小粒徑的乳液系統。若系統需要較高的中剪切黏度時，它可與 RHEOLATE® 255 或 RHEOLATE® 266 搭配使用。RHEOLATE® 212 在不含 VOC 的亮光及半光系統中提供高剪切黏度、改善流動和平坦性能的效果比其他流變改質 | |
| RHEOLATE® 278 | Elementis 海名斯特殊化学 | RHEOLATE® 278 is a 25 % solution designed for use in paints containing small-particle-size emulsions and high-volume-solids systems. RHEOLATE® 278 is an additive with superior thickening efficiency in the high-shear range (ICI viscosity) – beyond that of ...展開 RHEOLATE® 278 is a 25 % solution designed for use in paints containing small-particle-size emulsions and high-volume-solids systems. RHEOLATE® 278 is an additive with superior thickening efficiency in the high-shear range (ICI viscosity) – beyond that of other thickeners. Emulsion paints with various ICI viscosities can be formulated by combining RHEOLATE® 255 and RHEOLATE® 278 or other rheological additives. 收起 | |
| RHEOLATE® FX 1010 | Elementis 海名斯特殊化学 | RHEOLATE® FX 1010 為一用於水性塗料的高效能聚醚聚氨酯流變助劑。其以液態形式供應，易於處理，方便使用。 | |
| SLIP-AYD® FS 444 | Elementis 海名斯特殊化学 | SLIP-AYD® FS 444 为一种液体添加剂，可增加表面光滑度和耐磨性，适用于水性和高极性溶剂型涂料的。 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展開 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展開 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展開 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展開 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展開 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展開 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展開 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展開 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展開 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展開 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展開 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展開 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展開 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...展開 STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. 收起 |
