| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展開 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| BIT-10 | Dalian Bio-Chem Co., Ltd. | BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1. | |
| BIT-20 | Dalian Bio-Chem Co., Ltd. | BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2. | |
| CIT/MIT-14M | Dalian Bio-Chem Co., Ltd. | CIT/MIT-14M is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paints, adhesives, inks, and dyes. This product is not combustible and is VOC-free. | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Crestacryl® 71-8026 | Scott Bader | Crestacryl® 71-8026 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9044 | Scott Bader | Crestacryl® 71-9044 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9076 | Scott Bader | Crestacryl® 71-9076 has very rapid solvent release and drive-over ability; resin has excellent hardness, very good elasticity and adhesion. It is a high grade road-marking paint. | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...展開 Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. 收起 | |
| Crestakyd® 10-0504 | Scott Bader | Crestakyd® 10-0504 is a 100% solids alkyd for low VOC exterior paints and wood stains | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-1025 | Scott Bader | Crestakyd® 10-1025 is used for economical gloss paints and primers. | |
| Crestakyd® 10-1066 | Scott Bader | Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats,...展開 Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes. 收起 | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2023 | Scott Bader | Crestakyd® 10-2023 is suitable for high solids wood stains and varnishes giving excellent durability. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 20-9509 | Scott Bader | Crestakyd® 20-9509 is a wood finishing alkyd used for lower VOC coatings. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...展開 Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. 收起 | |
| Crestakyd® 30-9055 | Scott Bader | Crestakyd® 30-9055 is a wood finishing alkyd used in nitrocellulose primers and top coats. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| Decoflux DP 210 Redbrown | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids conte...展開 Decoflux DP 210 Redbrown is a grinding vehicle. This product is insoluble in water and can be used in the production of reddish brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP 211 Yellow | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content...展開 Decoflux DP 211 Yellow is a grinding vehicle. This product is insoluble in water and can be used in the production of yellowish-brown inks in digital printing applications. The end user will have to determine and adapt the required ratio of solids content and media. 收起 | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展開 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展開 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起 | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...展開 Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. 收起 | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展開 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展開 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展開 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展開 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| Granicer 7030 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete sur...展開 Granicer 7030, in the form of a turbid, viscous liquid, is a preparation of polymers in an aqueous solution. This product allows the application of granules to tiles by airless, double disk, bell, or curtain coating machines, and to cover the complete surface of the tiles. It can be used in the fields of engraving and digital printing. This product is miscible in water. 收起 | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展開 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展開 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展開 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展開 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展開 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展開 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展開 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展開 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TPO | Eutec Chemical Co., Ltd. | Photocure TPO is a clear solution yellow crystalline powder of 2,4,6-trimethylbenzoyldiphenylphosphine oxide with a melting point between 87-93℃. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TPO-L | Eutec Chemical Co., Ltd. | Photocure TPO-L is a clear solution yellow liquid of Ethyl (2,4,6-trimethylbenzoyl)phenylphosphinate. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TZT | Eutec Chemical Co., Ltd. | Photocure TZT (2,4,6-Trimethylbenzophenone Methyl benzophenone Benzophenone) is a pale yellow odorless liquid. This product is used as a photoinitiator in UV-cured resins, inks and coatings. | |
| Texicryl® 13-503 | Scott Bader | Texicryl® 13-503 is designed for printing inks and non absorbent, low energy substrates, gives excellent wet rub performance. | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| Texicryl® 13-809 | Scott Bader | Texicryl® 13-809 is a hard emulsion for high gloss, fast drying coatings, OPV’s and inks. Can be used as deblocking modifier. | |
| Texicryl® 13-812 | Scott Bader | Texicryl® 13-812 is a high efficiency alkali soluble binder for flexographic printing of cartons and paper sacks. | |
| Texicryl® 13-813 | Scott Bader | Texicryl® 13-813 is a low odour, soft polymer with superior gloss and holdout for use in verprint varnishes. Heat sealable. | |
| Texicryl® 13-814 | Scott Bader | Texicryl® 13-814 is a soft polymer with excellent water barrier properties for OPV’s and inks. Heat sealable. Very low Cobb value. Low slip coefficient. | |
| Texicryl® 13-819 | Scott Bader | Texicryl® 13-819 is an emulsion vehicle with unique plasticiser technology. Good heat/blocking resistance, for highest gloss applications. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...展開 Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. 收起 |
