| AR-515 | Chan Sieh Enterprises Co, Ltd. | AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| AR-523 | Chan Sieh Enterprises Co, Ltd. | AR-523 is a BMA copolymer resin featuring good water-resistance, low odor, and good outdoor durability. This product can be used in flexo and gravure printing inks, packaging inks, plastic coatings, and aluminum heat seal lacquers. | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...展開 AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
| AR-620 | Chan Sieh Enterprises Co, Ltd. | AR-620 is an acrylic resin printing binder in the form of a white emulsion. This product features long retention of film surface tack. It can be used to temporarily adhere fabrics to a printing board. | |
| Chrome Oxide Green | Qingdao Yuanhang Chemicals Co., Ltd | Chrome Oxide Green is a green powder with strong coloring and covering strength. This product can be used in pigments, paints, building ceramic colorants, and printing inks. | |
| Diethylene Glycol (DEG) | Qingdao Yuanhang Chemicals Co., Ltd | Diethylene Glycol (DEG) is a clear liquid that can be used as a solvent for lacquer, paint and varnish, coupling printing inks, and water-based coating. | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...展開 L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 收起 | |
| L-2842 | Chan Sieh Enterprises Co, Ltd. | L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings. | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...展開 L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 收起 | |
| L-2908 | Chan Sieh Enterprises Co, Ltd. | L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...展開 L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. 收起 | |
| L-2909 | Chan Sieh Enterprises Co, Ltd. | L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...展開 L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. 收起 | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...展開 L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. 收起 | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...展開 L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. 收起 | |
| L-2946 | Chan Sieh Enterprises Co, Ltd. | L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...展開 L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. 收起 | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...展開 L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. 收起 | |
| L-2994 | Chan Sieh Enterprises Co, Ltd. | L-2994 is an aliphatic polyester polyol featuring good flexibility and adherence to plastic. This product is well suited for use in flexo and gravure printing inks. | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...展開 L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 收起 | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...展開 L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 收起 | |
| L-3952 | Chan Sieh Enterprises Co, Ltd. | L-3952 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and BHMR. This product can be used in flat parquet lacquers, printing inks, and decorative paints. | |
| Mono Ethylene Glycol (MEG) | Qingdao Yuanhang Chemicals Co., Ltd | Mono Ethylene Glycol (MEG) is a clear, moderately viscous, hydroscopic liquid that can be used for solvent properties in custom formulations of paints, dyes, inks and other blended products. | |
| P-103 | Chan Sieh Enterprises Co, Ltd. | P-103 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H | Chan Sieh Enterprises Co, Ltd. | P-103H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H-1 | Chan Sieh Enterprises Co, Ltd. | P-103H-1 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104 | Chan Sieh Enterprises Co, Ltd. | P-104 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104H | Chan Sieh Enterprises Co, Ltd. | P-104H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-125U | Chan Sieh Enterprises Co, Ltd. | P-125U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-145U | Chan Sieh Enterprises Co, Ltd. | P-145U is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-155U | Chan Sieh Enterprises Co, Ltd. | P-155U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-2026 | Chan Sieh Enterprises Co, Ltd. | P-2026 is a vinyl acetate acrylic copolymer in the form of a white emulsion. This product has good color value and pigment adhesion. It can be used as a binder for pigment printing. It is suitable for cotton fabrics. | |
| P-645 | Chan Sieh Enterprises Co, Ltd. | P-645 is a self-crosslinking acrylic resin in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-145 | Chan Sieh Enterprises Co, Ltd. | PB-145 is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-155 | Chan Sieh Enterprises Co, Ltd. | PB-155 is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| Sodium Lauryl Ethere Sulfate (SLES) | Qingdao Yuanhang Chemicals Co., Ltd | Sodium Lauryl Ethere Sulfate (SLES) is a white or yellowish paste that is an anionic surfactant and a foaming and degreasing agent that can be applied to printing. | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展開 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展開 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展開 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展開 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展開 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展開 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展開 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展開 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展開 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展開 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展開 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展開 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展開 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...展開 STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. 收起 | |
| TOYNOL® D-504 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital print...展開 TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起 | |
| TOYNOL® DF-110B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展開 TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-220 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispers...展開 TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220M | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispers...展開 TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispers...展開 TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-58 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active ...展開 TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-58S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active...展開 TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-59 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and pa...展開 TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and paper coatings. This product is dispersible in water. 收起 | |
| TOYNOL® DF-70 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展開 TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 30% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展開 TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 37% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-80B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展開 TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-80D | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展開 TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80L | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展開 TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 20% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80PG | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展開 TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DS-121 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-121, in the form of a pale yellow liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and pigment pastes. Its flash point starts above 100℃. | |
| TOYNOL® DS-136 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-136, in the form of a brown liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and in pigment pastes. Its flash point starts above 100℃. | |
| TOYNOL® FS-204 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, amo...展開 TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 100% active content. 收起 | |
| TOYNOL® FS-204A | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展開 TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204BC | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展開 TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204DPM | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick co...展開 TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204E | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204E, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展開 TOYNOL® FS-204E, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204PA | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204PA, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展開 TOYNOL® FS-204PA, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204PG | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204PG, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展開 TOYNOL® FS-204PG, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-500 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-500, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital prin...展開 TOYNOL® FS-500, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起 | |
| TOYNOL® FS-620 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-620, in the form of a pale yellow liquid, is a defoaming wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-640 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-640, in the form of a pale yellow liquid, is a defoaming wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-6502 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-6502, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-660 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-660, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-680 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-680, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® FS-683 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-683, in the form of a pale yellow liquid, is a low-foam wetting agent for waterborne systems. This product can be used in waterborne inks, varnishes, adhesives, and automotive or non-stick coatings. It contains 100% active content. | |
| TOYNOL® S-180 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-180, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 63% active content. | |
| TOYNOL® S-182 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® S-182, in the form of a clear liquid, is a multi-branched alcohol modified surfactant. This product can be used in waterborne inks, water-based varnishes, adhesives, paper coatings, and textile coatings. It contains 68% active content. |
