| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...展開 Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. 收起 | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...展開 Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. 收起 | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...展開 Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. 收起 | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Benzyl Alcohol | Prakash Chemical Intl. Pvt. Ltd. | Benzyl Alcohol is a clear liquid that can be used as a solvent in marine paints, ball pen inks, paint stripper, lacquers and waterborne coating applications. This product has a moisture content of 0.10% and a specific gravity of 1.040 to 1.050 at 25°C. | |
| Chrome Oxide Green | Qingdao Yuanhang Chemicals Co., Ltd | Chrome Oxide Green is a green powder with strong coloring and covering strength. This product can be used in pigments, paints, building ceramic colorants, and printing inks. | |
| Diethylene Glycol (DEG) | Qingdao Yuanhang Chemicals Co., Ltd | Diethylene Glycol (DEG) is a clear liquid that can be used as a solvent for lacquer, paint and varnish, coupling printing inks, and water-based coating. | |
| Ethyl Acetate | Prakash Chemical Intl. Pvt. Ltd. | Ethyl Acetate is the ester of ethanol and acetic acid, and is manufactured on a large scale for use as a solvent. This product can be used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. It can also be us...展開 Ethyl Acetate is the ester of ethanol and acetic acid, and is manufactured on a large scale for use as a solvent. This product can be used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. It can also be used in solvent based flexographic and rotogravure inks and glues. 收起 | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...展開 IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. 收起 | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...展開 IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. 收起 | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Mono Ethylene Glycol (MEG) | Qingdao Yuanhang Chemicals Co., Ltd | Mono Ethylene Glycol (MEG) is a clear, moderately viscous, hydroscopic liquid that can be used for solvent properties in custom formulations of paints, dyes, inks and other blended products. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...展開 Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. 收起 | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展開 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| Sodium Lauryl Ethere Sulfate (SLES) | Qingdao Yuanhang Chemicals Co., Ltd | Sodium Lauryl Ethere Sulfate (SLES) is a white or yellowish paste that is an anionic surfactant and a foaming and degreasing agent that can be applied to printing. | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展開 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展開 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展開 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展開 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展開 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展開 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展開 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展開 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展開 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展開 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展開 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展開 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展開 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...展開 STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. 收起 | |
| VAPORGUARD® R5341B | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5341B is a water-based coating designed for corrugated board liners and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). | |
| VAPORGUARD® R5715A | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5715A is a water-based coating designed for kraft liners. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). |
