| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...展開 Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 收起 | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...展開 Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 收起 | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 多功能氨基醇助劑 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...展開 Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. 收起 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...展開 Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. 收起 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展開 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 憎水性單官能團甲基丙烯酸酯單體，具有低玻璃化轉變溫度（Tg），具有出色的柔韌性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃態轉化溫度(Tg)的單功能丙烯酸甲酯單體。作為聚合型塑化劑使用時，展現出很好的可塑性。使用Bisomer® LMA 97SP的配方可以減少不同批次產品在粘度、顏料潤濕性、抗化學品性、附著力、硬度、剪切強度、粘性等性能上的差異性。 該產品是合成應用於工業塗料、印刷油墨、壓敏膠等領域的高質量丙烯酸樹脂的核心原料。 | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊聚合物單體。是水溶性的，並提供了一種創新的途徑用於生產傳統和水性UV固化氨基甲酸酯丙烯酸酯齊聚物。作為HEA和HPA的替代物，它無毒、易於處理，列於歐洲現有商業化學品目錄（EINECS）的聚合物分類 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 為制備UV固化氨基甲酸酯丙烯酸酯齊聚物提供了一種非常規的途徑。它是用於基於氨基甲酸酯丙烯酸酯和乙烯基酯（環氧乙烯基酯）UV體系的出色的低收縮反應性稀釋劑 | |
| Cinergi™ 1060 | Lawter | Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss...展開 Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss, good water balance with fast setting and low misting properties as added benefits. Cinergi™ 1060 is used in sheet-fed inks and wetting varnishes. 收起 | |
| Cinergi™ 1061 | Lawter | Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color develo...展開 Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color development and water balance. Cinergi™ 1061 is used in sheet-fed inks. 收起 | |
| Cinergi™ 2000 E | Lawter | Cinergi™ 2000 E is a special varnish that is 100% non-volatile and is based on modified vegetable oil blends. The product displays high gloss, low bronzing and good film formation in special inks such as sheet-fed, metal deco and web-fed applications. | |
| Cinergi™ 2091 A | Lawter | Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as we...展開 Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as well as fast set speeds. Cinergi™ 2091 A is used in sheet-fed and letterpress inks. 收起 | |
| Cinergi™ 8710 C | Lawter | Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C als...展開 Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C also possesses good transfer, tack stability with good shear and heat resistance. The varnish shows good water balance with a high resistance to water. It is used as a let down varnish or gel in quickset offset inks or sheet-fed inks. 收起 | |
| Cinergi™ 8735 C | Lawter | Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows ...展開 Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows good tack stability and a high resistance to water. Cinergi™ 8735 C is used as a let down varnish in quickset offset and sheet-fed offset inks and a variety of other offset inks. 收起 | |
| Cinergi™ 8760 C | Lawter | Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish show...展開 Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish shows good color strength and flow, combined with gloss and a fast setspeed. It also has good tack stability and a high resistance to water. Cinergi™ 8760 C is used as a let down varnish or gel in quickset offset and sheet-fed offset inks. 收起 | |
| Decotherm™ 100C | Lawter | Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminu...展開 Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminum cans and steel and tin plate lithographic inks, Decotherm™ 100C is also used on color cans, but not on white cans. 收起 | |
| Decotherm™ 1720C | Lawter | Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™...展開 Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™ 1720C has good pigment wetting and scratch resistance properties and apart from drawn aluminum cans and steel and tin plate lithographic inks, is also suitable for use in color cans and not white cans. 收起 | |
| Decotherm™ 210 E | Lawter | Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing appli...展開 Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing applications. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展開 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展開 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc. TRIMET Products Group | 產品技術指導 - 一種獨特和多用途的位阻二醇分子，具羥基和羧基官能性。 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 是一種DMPA CHDA BDO己二酸聚酯樹脂，98%不揮發組分。它可作為水性體系的酸官能團來源和作為共樹脂改進顏料的潤濕、分散和穩定。 | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Polyol HA-0135LV2是一種同時帶酸和羥基官能團的低結晶聚酯多醇。類似DMPA® Polyol HA-0135，該樹脂可消除在聚氨酯乳液生產過程中NMP作為加工溶劑的需球 | |
| Eco-Rez™ 350 C | Lawter | Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealan...展開 Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealants and heat resistant inks. 收起 | |
| Eco-Rez™ 4237 C | Lawter | Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a...展開 Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a wider water window. Other advantages include good run resistance, low yellowing and odor and a high structure. Eco-Rez™ 4237 C is used in offset, web offset, heatset and coldset applications as well as in sheet-fed and gloss offsets and low odor inks. Lower color makes it ideal for use in overprint varnishes. 收起 | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...展開 Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. 收起 | |
| Eco-Rez™ 9730 A | Lawter | Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the...展開 Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the product provides a more sustainable chemistry option with improved levels of performance. Eco-Rez™ 9730 A is used in all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...展開 Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...展開 Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. 收起 | |
| Flex-Rez™ 0080 CS | Lawter | Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substra...展開 Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substrates. The resin is used in gravure and flexographic inks, in overprint varnishes as well as cold seal release lacquers. 收起 | |
| Flex-Rez™ 0100 CS | Lawter | Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and...展開 Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and displays low viscosity for increased solids. Flex-Rez™ 0100 CS is suitable for use in flexographic and gravure inks, in overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 0120 CS | Lawter | Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible wi...展開 Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible with phenolic and maleic resins and displays good formulating flexibility. Flex-Rez™ 0120 CS is suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1060 CS | Lawter | Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applicati...展開 Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applications in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1066 CS | Lawter | Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with pheno...展開 Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with phenolic and maleic resins, rosins and rosin derivatives and is considered suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1074 CS | Lawter | Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coa...展開 Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coated substrates. Flex-Rez™ 1074 CS shows compatibility with phenolic and maleic resins, rosin derivatives and rosins. It has good formulating flexibility and a low viscosity. The product is ideally suited for use in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1084 AS | Lawter | Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial ge...展開 Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial gel resistance. Flex-Rez™ 1084 AS provides film hardness making it suitable as a modifier for improving rub, scratch and grease resistance. The resin presents ideal opportunities for the creation of unique, high-performance inks, applicable in various synthetic polymer substrates. Flex-Rez™ 1084 AS is used in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 1094 CS | Lawter | Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyeth...展開 Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyethylene, aluminum, nylon, polypropylene and other foil coated substrates. Flex-Rez™ 1094 CS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It is commonly used in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1104 LCS | Lawter | Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104...展開 Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104 LCS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It shows lower viscosity for increased solids and good formulating flexibility. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1155 AS | Lawter | Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degre...展開 Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degree of compatibility allows it to be ideal for pigment wetting applications. Flex-Rez™ 1155 AS has good gel resistance as well as water, alkali, lard, oil and grease resistance properties. Further, it displays high gloss, adhesion and film forming capabilities. Flex-Rez™ 1155 AS is suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 2433 AD | Lawter | Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal ...展開 Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal use in gravure and flexographic inks and in coatings and overprint varnishes. 收起 | |
| Flex-Rez™ 2445 AD | Lawter | Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistan...展開 Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistance properties, high gloss and pigment wetting features and film forming capabilities. Flex-Rez™ 2445 AD is suitable for use in gravure and flexographic inks, coatings and overprint varnishes and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 3370 CS | Lawter | Flex-Rez™ 3370 CS is a co-solvent polyamide resin that helps to improve gel resistance and is considered suitable for use in flexo and gravure inks as well as in lacquers for polyolefin films. | |
| Flex-Rez™ 4399 AD | Lawter | Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor an...展開 Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor and film forming benefits. Flex-Rez™ 4399 AD is ideal for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4512 AS | Lawter | Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solub...展開 Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solubility and high degree of compatibility make it suitable for pigment wetting applications. Flex-Rez™ 4512 AS also has good gel, water and deep freeze resistance as well as high gloss and low viscosity characteristics. The resin is suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4584 AD | Lawter | Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suit...展開 Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 5111 AD | Lawter | Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that con...展開 Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that contribute to making Flex-Rez™ 5111 AD suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 6243AS | Lawter | Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like oth...展開 Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like other commercial polyamide resins. Flex-Rez™ 6243AS dries to a hard film composition creating water resistant, acid, alkali and grease resistant properties as well as block, ice-crinkle and rub characteristics. It does not gel at low temperatures, but can boost gel resistance of standard polyamide inks. Flex-Rez™ 6243AS is ideal for use in gravure and flexographic inks, overprint varnishes and coatings. 收起 | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展開 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展開 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...展開 Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 收起 | |
| Hydro-Rez™ 1100D | Lawter | Hydro-Rez™ 1100D is a sulfopolyester resin for water-based liquid inks that displays high gloss and good pigment wetting properties. It has an ideal lay of aluminum (metallization), has good resolubility, alcohol resistance and easy wash-up. Hydro-Rez™ 11...展開 Hydro-Rez™ 1100D is a sulfopolyester resin for water-based liquid inks that displays high gloss and good pigment wetting properties. It has an ideal lay of aluminum (metallization), has good resolubility, alcohol resistance and easy wash-up. Hydro-Rez™ 1100D is suitable for use in metallic inks, pigment dispersions and pre and post-metal primers. 收起 | |
| Hydro-Rez™ 1200D2 | Lawter | Hydro-Rez™ 1200D2 is a sulfopolyester resin for water-based liquid inks that displays adhesion to metal surfaces and has good alcohol and water resistance properties. It is suitable for use in metallic inks, pre and post-metal primers and pigment dispersi...展開 Hydro-Rez™ 1200D2 is a sulfopolyester resin for water-based liquid inks that displays adhesion to metal surfaces and has good alcohol and water resistance properties. It is suitable for use in metallic inks, pre and post-metal primers and pigment dispersions. 收起 | |
| Hydro-Rez™ 1400D | Lawter | Hydro-Rez™ 1400D is a sulfopolyester resin for water-based liquid inks with a low glass transition temperature (Tg), good lamination bond strength and adhesion to polyester films as well as an easy wash-up. It is used in film-forming co-resins and laminat...展開 Hydro-Rez™ 1400D is a sulfopolyester resin for water-based liquid inks with a low glass transition temperature (Tg), good lamination bond strength and adhesion to polyester films as well as an easy wash-up. It is used in film-forming co-resins and lamination applications. 收起 | |
| Hydro-Rez™ 2007E | Lawter | Hydro-Rez™ 2007E is a solid acrylic resin with a low molecular weight intended for high-gloss OPV's. It is considered ideal for use in flexo and gravure inks and OPV applications. | |
| Hydro-Rez™ 2710E | Lawter | Hydro-Rez™ 2710E is a solid acrylic resin for water-based liquid inks that has good strength and pigment wetting properties. It is considered ideal for use in flexo and gravure inks and OPV applications. | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展開 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...展開 Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. 收起 | |
| Hydro-Rez™ 6200 A | Lawter | Hydro-Rez™ 6200 A is a fumaric modified rosin ester soluble in alcohol or able to be dispersed in water with morpholine or ammonia. Its high melting point enhances fast solvent release and good leveling as well as providing compatibility with manila resin...展開 Hydro-Rez™ 6200 A is a fumaric modified rosin ester soluble in alcohol or able to be dispersed in water with morpholine or ammonia. Its high melting point enhances fast solvent release and good leveling as well as providing compatibility with manila resins and shellac. The rosin ester promotes gloss and leveling in floor polishes and is ideal for use in water-based or solvent flexographic inks. Hydro-Rez™ 6200 A can also be used in carton and specialty inks and in spirit varnishes. 收起 | |
| Luminex™ 70 A | Lawter | Luminex™ 70 A is a heatset gel vehicle that displays good solubility, gloss, transfer and lithographic performance. It also has good water balance, solvent release and a sharp dot structure. The product is suitable for use in heatset offset prints. | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...展開 Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. 收起 | |
| Miradull™ 8689 QL | Lawter | Miradull™ 8689 QL is an overprint varnish comprised of blended oils and is considered a varnish with driers, wax and matting agents. It has very dull OPV and shows resistance to polishing. Miradull™ 8689 QL is used in overprint varnishes for sheet-fed app...展開 Miradull™ 8689 QL is an overprint varnish comprised of blended oils and is considered a varnish with driers, wax and matting agents. It has very dull OPV and shows resistance to polishing. Miradull™ 8689 QL is used in overprint varnishes for sheet-fed applications. 收起 | |
| Miradull™ E | Lawter | Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing pro...展開 Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing properties. The product is used in offset inks, sheet-fed and heatset inks. 收起 | |
| Miraglaze™ 22 A | Lawter | Miraglaze™ 22 A is an overprint varnish that has been created to give a great combination of light color, alcohol resistance, high gloss, drying speed and good rub and slip properties. Miraglaze™ 22 A is suitable for use in commercial sheet-fed and foldin...展開 Miraglaze™ 22 A is an overprint varnish that has been created to give a great combination of light color, alcohol resistance, high gloss, drying speed and good rub and slip properties. Miraglaze™ 22 A is suitable for use in commercial sheet-fed and folding carton sheet-fed inks as well as overprint varnishes. 收起 | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...展開 Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. 收起 | |
| Miraglaze™ 8909 E | Lawter | Miraglaze™ 8909 E is an overprint varnish with 70% non-volatile composition derived from DCO, gelling agents, tung oil, mineral distillates and rosin-based resins. It shows a high gloss with fast drying and setting properties. Miraglaze™ 8909 E also exhib...展開 Miraglaze™ 8909 E is an overprint varnish with 70% non-volatile composition derived from DCO, gelling agents, tung oil, mineral distillates and rosin-based resins. It shows a high gloss with fast drying and setting properties. Miraglaze™ 8909 E also exhibits low yellowing, good tack stability and leveling features and is considered ideal in offset inks, overprint varnishes and wet-on-dry and wet-on-wet applications. 收起 | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...展開 Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. 收起 | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...展開 Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. 收起 | |
| Pinerez® 2415 | Lawter | Pinerez® 2415 is a tackifier resin that is highly stabilized with a high softening point, while exhibiting low color and heat stability. It is used as a tackifier in hot melt and solvent-based adhesives. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展開 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展開 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展開 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Polysperse™ | Lawter | Polysperse™ is a micronized wax powder that provides good slip as well as good rub resistance and comes recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ 735 | Lawter | Polysperse™ 735 is a micronized wax powder that displays good rub resistance and is recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...展開 Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. 收起 | |
| Polysperse™ HPC | Lawter | Polysperse™ HPC is a micronized wax powder that displays good rub resistance, has good slip properties and a high melting point. It is recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ W2F | Lawter | Polysperse™ W2F is a micronized wax with 98% solids and provides good slip and rub resistance and finds uses in flexo, gravure and digital printing inks. | |
| Reactol™ 1111 E | Lawter | Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and aceta...展開 Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and acetates when combined with drying oils. Reactol™ 1111 E is used in weather-resistant finishes, in cold-mix and spar varnishes and in flexo and gravure inks and lacquers. 收起 | |
| Reactol™ 1717 H C | Lawter | Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds...展開 Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds, melamines, chlorinated rubber and polyamide resins. The product is used in rotogravure and flexographic inks, laminating inks, primer coatings, cellulose lacquers and adhesives. 收起 | |
| Reactol™ 1717BC | Lawter | Reactol™ 1717BC is a polyketone resin for solvent-based liquid inks that shows broad compatibility with other resins and solvents. It has high gloss, good pigment wetting properties, improves adhesion, has low color and reduces gel point of polyamide inks...展開 Reactol™ 1717BC is a polyketone resin for solvent-based liquid inks that shows broad compatibility with other resins and solvents. It has high gloss, good pigment wetting properties, improves adhesion, has low color and reduces gel point of polyamide inks. Reactol™ 1717BC is used in flexo and gravure inks and lacquers, in ballpoint and jet inks as well as screen inks. 收起 | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...展開 Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. 收起 | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展開 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展開 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| Setalin™ V 270C | Lawter | Setalin™ V 270C is an alkyd resin that has good pigment wetting properties and provides hard films that make it ideal for use in offset printing systems. Setalin™ V 270C is also considered ideal for use in wetting varnishes, in sheet-fed, webfed offset an...展開 Setalin™ V 270C is an alkyd resin that has good pigment wetting properties and provides hard films that make it ideal for use in offset printing systems. Setalin™ V 270C is also considered ideal for use in wetting varnishes, in sheet-fed, webfed offset and letterpress inks. 收起 | |
| Setalin™ V 333 C | Lawter | Setalin™ V 333 C is a linseed oil-based alkyd resin that has low viscosity with good pigment wetting and litho properties. Crushing or grinding the resin can lead to more cleanliness and color strength than conventional wetting vehicles, while good flow c...展開 Setalin™ V 333 C is a linseed oil-based alkyd resin that has low viscosity with good pigment wetting and litho properties. Crushing or grinding the resin can lead to more cleanliness and color strength than conventional wetting vehicles, while good flow characteristics are maintained. It is also fast setting, has high gloss and low bronzing features. Setalin™ V 333 C is used in sheet-fed and webfed offset inks and in wetting varnishes. 收起 | |
| Setalin™ V 402 | Lawter | Setalin™ V 402 is a soya bean oil-based alkyd resin that exhibits good litho and pigment wetting properties, making the resin ideally suited for use in web offset inks. It is fast setting, has high gloss while low odor and yellowing features make up addit...展開 Setalin™ V 402 is a soya bean oil-based alkyd resin that exhibits good litho and pigment wetting properties, making the resin ideally suited for use in web offset inks. It is fast setting, has high gloss while low odor and yellowing features make up additional benefits. Setalin™ V 402 is good in 3-piece can metal decorating inks and in sheet-fed and low odor inks. 收起 | |
| Setalin™ V 407 E | Lawter | Setalin™ V 407 E is an alkyd resin with a sunflower oil base that has non-yellowing properties. The benefit of a non-yellowing property is that it makes the resin ideal for white and low odor inks as well as non-yellowing inks. The product can also be use...展開 Setalin™ V 407 E is an alkyd resin with a sunflower oil base that has non-yellowing properties. The benefit of a non-yellowing property is that it makes the resin ideal for white and low odor inks as well as non-yellowing inks. The product can also be used in 3-piece can metal decorating inks, offsets and over print varnishes. 收起 | |
| Setalin™ V 439C | Lawter | Setalin™ V 439C is a long-oil alkyd resin based on linseed oil that has good water pick-up and a controlled polarity which is ideal for water balance in quick-set inks. A further advantage is that the oil content is close to 70% making Setalin™ V 439C sui...展開 Setalin™ V 439C is a long-oil alkyd resin based on linseed oil that has good water pick-up and a controlled polarity which is ideal for water balance in quick-set inks. A further advantage is that the oil content is close to 70% making Setalin™ V 439C suitable for use in other inks like gloss offsets and heatsets. 收起 | |
| Setalin™ V 555 C | Lawter | Setalin™ V 555 C is a linseed oil-based alkyd resin with good litho and pigment wetting properties which in turn act as a good pigment binder on most printable surfaces. Flushing or grinding the resin creates more cleanliness and color strength than conve...展開 Setalin™ V 555 C is a linseed oil-based alkyd resin with good litho and pigment wetting properties which in turn act as a good pigment binder on most printable surfaces. Flushing or grinding the resin creates more cleanliness and color strength than conventional wetting vehicles while retaining good flow characteristics. Setalin™ V 555 C is fast setting, has high gloss and low bronzing making it ideal for use in sheet-fed and webfed offset inks and wetting varnishes. 收起 | |
| Setalin™ V 700 C | Lawter | Setalin™ V 700 C is a linseed oil-based alkyd resin with medium viscosity and good litho and pigment wetting properties. Flushing or grinding the resin leads to deeper color strength and cleanliness than conventional wetting vehicles, while retaining good...展開 Setalin™ V 700 C is a linseed oil-based alkyd resin with medium viscosity and good litho and pigment wetting properties. Flushing or grinding the resin leads to deeper color strength and cleanliness than conventional wetting vehicles, while retaining good flow characteristics. Setalin™ V 700 C is fast setting, has high gloss, low brozing features and is used in webfed and sheet-fed offset inks and wetting varnishes. 收起 | |
| Setalin™ V 803 C | Lawter | Setalin™ V 803 C is a soya bean oil-based alkyd resin with low or medium viscosity that can carry and print larger pigment loads than conventional alkyds and bodied oils. It displays equal color development to other drying oil-modified linear polyesters a...展開 Setalin™ V 803 C is a soya bean oil-based alkyd resin with low or medium viscosity that can carry and print larger pigment loads than conventional alkyds and bodied oils. It displays equal color development to other drying oil-modified linear polyesters and is suitable for use in heat-induced drying applications. Setalin™ V 803 C has good pigment wetting benefits and along with water balance, high gloss and low misting properties makes it ideal for use in sheet-fed offset, webfed offset and metal deco inks as well as wetting varnishes. 收起 |
