Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展開 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展開 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展開 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展開 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展開 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展開 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
HC9-110 | Ecopower Chemical Co., Ltd. | HC9-110 is a C9 petroleum hydrocarbon resin that can be used to improve paints, coatings, printing inks, and adhesives. | |
HC9-120 | Ecopower Chemical Co., Ltd. | HC9-120 is a C9 petroleum hydrocarbon resins that can be used in paints, adhesives, pressure sensitive tapes, and printing inks. | |
Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
Maleic Acid Resin M-120 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-120 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. | |
Maleic Acid Resin M-130 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-130 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. | |
Maleic Acid Resin M-140 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-140 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. |