| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起 | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起 | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起 | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展開 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展開 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展開 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展開 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展開 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展開 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展開 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展開 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Fast Blue B | Emperor Pigment Co., Ltd. | Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks,...展開 Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks, and paints. 收起 | |
| Fast Blue BGNCF | Emperor Pigment Co., Ltd. | Fast Blue BGNCF is a greenish colored pigment that is used in inks. It has a density value of 1.5 and a pH value of 7. This product has a color index number of Pigment Blue 15:4, a CAS number of 147-14-8, and an EU number of 205-685-1. | |
| Fast Blue BGS | Emperor Pigment Co., Ltd. | Fast Blue BGS is a pigment that is greenish in color. It has a color index number of Pigment Blue 15:3, a CAS number of 122390-87-1, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks. | |
| Fast Blue BS | Emperor Pigment Co., Ltd. | Fast Blue BS is a reddish colored pigment that is used in paints and inks. It has a color index number of Pigment Blue 15:1, a CAS number of 12239-87-1, and an EU number of 205-685-1. This product has a density value of 1.5 and a pH value of 7. | |
| Fast Blue Lake | Emperor Pigment Co., Ltd. | Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number ...展開 Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number of Pigment Blue 17, and a CAS number of 71799-04-7. 收起 | |
| Fast Blue Lake BO | Emperor Pigment Co., Ltd. | Fast Blue Lake BO is a blue colored pigment that is used in offset inks. It has a color index number of Pigment Blue 1, and a CAS number of 1325-87-7. This product has a heat value of 140 degrees Celsius and an oil absorption value of less than 45. | |
| Fast Blue Toner | Emperor Pigment Co., Ltd. | Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU num...展開 Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU number of 215-410-7. 收起 | |
| Fast Blue Toner R | Emperor Pigment Co., Ltd. | Fast Blue Toner R is a pigment that is blue in color. It has a color index number of Pigment Blue 10 and a CAS number of 71798-70-4. This product has a density value of 1.8, a pH value of 6, and is used in offset inks, solvent inks, and aqueous inks. | |
| Fast Milori Blue | Emperor Pigment Co., Ltd. | Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints...展開 Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints, and waterbased paints. 收起 | |
| Fast Orange G | Emperor Pigment Co., Ltd. | Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent...展開 Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent inks. 收起 | |
| Fast Orange G-R | Emperor Pigment Co., Ltd. | Fast Orange G-R is an orange colored pigment that is used in surface printing inks. It has a color index number of Pigment Orange 13, and a heat resistance value of 160 degrees Celsius. | |
| Fast Orange GRN (Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange GRN (Semi-Tr) is a pigment that is orange in color. It has a color index number of Pigment Orange 16, a heat resistance value of 180 degrees Celsius, and is used in offset inks and waterbased inks. | |
| Fast Orange GRN-P(Tr)16 | Emperor Pigment Co., Ltd. | Fast Orange GRN-P(Tr)16 is an orange colored pigment that is used in surface printing inks and inner printing inks. It has a heat resistance value of 180 degrees Celsius and a color index number of Pigment Orange 16. | |
| Fast Orange OP-213(OP) | Emperor Pigment Co., Ltd. | Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and o...展開 Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and oil based ink. 收起 | |
| Fast Orange RL-TR | Emperor Pigment Co., Ltd. | Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks a...展開 Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Orange RL-T(Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent ink...展開 Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent inks, aqueous inks, and aqueous coatings. 收起 | |
| Fast Orange RL(Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL(Semi-Tr) is an orange colored pigment that is used in waterbased inks. It has a color index number of Pigment Orange 34, a density value of 1.6, and a pH value of 6.0 to 7.0. | |
| Fast Orange RN | Emperor Pigment Co., Ltd. | Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH val...展開 Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH value of 5.5. 收起 | |
| Fast Red BBC-S | Emperor Pigment Co., Ltd. | Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, ...展開 Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, PA inks, and PP inks. 收起 | |
| Fast Red BBN | Emperor Pigment Co., Ltd. | Fast Red BBN is a yellowish red colored pigment that is used in offset inks. It has a density value of 1.8 and a pH value of 7.0 to 8.0. This product has a color index number of Pigment Red 48:1, a CAS number of 7585-41-3, and an EU number of 231-494-8. | |
| Fast Red BBN-W | Emperor Pigment Co., Ltd. | Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterb...展開 Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks and in offset inks. 收起 | |
| Fast Red BBS-W | Emperor Pigment Co., Ltd. | Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks...展開 Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks. 收起 | |
| Fast Red F2R | Emperor Pigment Co., Ltd. | Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a ...展開 Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a pH value of 6.5 to 7.5. 收起 | |
| Fast Red F4R | Emperor Pigment Co., Ltd. | Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU num...展開 Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU number of 229-100-4. 收起 | |
| Fast Red N | Emperor Pigment Co., Ltd. | Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased i...展開 Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased inks. 收起 | |
| Fast Red Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and ...展開 Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and coating. 收起 | |
| Fast Rose Lake | Emperor Pigment Co., Ltd. | Fast Rose Lake is a violet colored pigment that is used in aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. | |
| Fast Rose Toner | Emperor Pigment Co., Ltd. | Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-...展開 Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. 收起 | |
| Fast Rose Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and...展開 Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Violet 4R | Emperor Pigment Co., Ltd. | Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment pr...展開 Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment printing. 收起 | |
| Fast Violet Lake | Emperor Pigment Co., Ltd. | Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 a...展開 Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Violet Toner R | Emperor Pigment Co., Ltd. | Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value...展開 Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Yellow 10G | Emperor Pigment Co., Ltd. | Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigmen...展開 Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 3, a CAS number of 6486-23-2, and an EU number of 229-355-1. 收起 | |
| Fast Yellow G | Emperor Pigment Co., Ltd. | Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air dry...展開 Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展開 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展開 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展開 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展開 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展開 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展開 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展開 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展開 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展開 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展開 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 |
