| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展開 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展開 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展開 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起 | |
| AR-515 | Chan Sieh Enterprises Co, Ltd. | AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| AR-523 | Chan Sieh Enterprises Co, Ltd. | AR-523 is a BMA copolymer resin featuring good water-resistance, low odor, and good outdoor durability. This product can be used in flexo and gravure printing inks, packaging inks, plastic coatings, and aluminum heat seal lacquers. | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...展開 AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
| AR-620 | Chan Sieh Enterprises Co, Ltd. | AR-620 is an acrylic resin printing binder in the form of a white emulsion. This product features long retention of film surface tack. It can be used to temporarily adhere fabrics to a printing board. | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起 | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展開 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展開 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展開 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展開 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展開 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展開 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hicoat 106 EG | Tridev Resins (India) Pvt. Ltd. | Hicoat 106 EG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to allow faster press speeds, protect and improve the appearance of the surface of ink graphics on substrates. I...展開 Hicoat 106 EG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to allow faster press speeds, protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 106 HG | Tridev Resins (India) Pvt. Ltd. | Hicoat 106 HG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to enhance gloss, protect and improve the appearance of the surface of ink graphics on substrates. It finds use ...展開 Hicoat 106 HG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to enhance gloss, protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 106 MG | Tridev Resins (India) Pvt. Ltd. | Hicoat 106 MG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applica...展開 Hicoat 106 MG is a low VOC, milky, opaque liquid overprint varnish, designed for off-line application with roller coater machines. It is used to protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 107 | Tridev Resins (India) Pvt. Ltd. | Hicoat 107 is a low VOC, milky, opaque liquid overprint varnish, designed for online application by high speed and offset machines through addition via the ink duct. It is used to protect and improve the appearance of the surface of ink graphics on substr...展開 Hicoat 107 is a low VOC, milky, opaque liquid overprint varnish, designed for online application by high speed and offset machines through addition via the ink duct. It is used to protect and improve the appearance of the surface of ink graphics on substrates. It finds use in many applications such as book and magazine covers, beverage cartons, detergent and cereal boxes, cosmetics and toy packaging and fast food containers. 收起 | |
| Hicoat 37 | Tridev Resins (India) Pvt. Ltd. | Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resi...展開 Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resistance. It is highly water dispersible and exhibits good compatibility and stability in aqueous vehicles. It can be used in water-based inks or clear coatings. 收起 | |
| Hicoat 61 | Tridev Resins (India) Pvt. Ltd. | Hicoat 61 is a low molecular weight polyelectrolyte solution based on styrene with good pigment wetting properties, latex compatibility, gloss and low odor. It is also suitable as a modifying resin for Hicoat emulsion polymers, improving resolubility, glo...展開 Hicoat 61 is a low molecular weight polyelectrolyte solution based on styrene with good pigment wetting properties, latex compatibility, gloss and low odor. It is also suitable as a modifying resin for Hicoat emulsion polymers, improving resolubility, gloss and general press performance. 收起 | |
| Hicoat 74 | Tridev Resins (India) Pvt. Ltd. | Hicoat 74 is a soft film-forming polymer used as modifier in overprint varnishes and as a let down vehicle to provide adhesion to film and substrates. It exhibits good pigment wetting and viscosity stability that allows it to be used in the grind stage of...展開 Hicoat 74 is a soft film-forming polymer used as modifier in overprint varnishes and as a let down vehicle to provide adhesion to film and substrates. It exhibits good pigment wetting and viscosity stability that allows it to be used in the grind stage of dry pigment dispersions. It is suitable for printing on films and foils, providing good transfer and printability, good grease and water resistance and ice crinkle resistance. 收起 | |
| Hicoat 77 | Tridev Resins (India) Pvt. Ltd. | Hicoat 77 is a medium styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It is designed for applications requiring high gloss and good grease and water resistance. It is suitable for pr...展開 Hicoat 77 is a medium styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It is designed for applications requiring high gloss and good grease and water resistance. It is suitable for printing applications on paper and board. It is compatible with most water based styrene/acrylate and acrylate polymers designed for flexographic and gravure inks, coatings and offset overprint varnishes. 收起 | |
| Hicoat 89 | Tridev Resins (India) Pvt. Ltd. | Hicoat 89 is a hard styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It was designed for applications requiring good gloss, fast drying times and low odor. It is suitable for printing...展開 Hicoat 89 is a hard styrene acrylic emulsion polymer developed as a let down vehicle for flexographic, gravure inks and overprint varnishes. It was designed for applications requiring good gloss, fast drying times and low odor. It is suitable for printing applications on paper and board media. It is compatible with most water based styrene/acrylate and acrylate polymers designed for flexographic and gravure inks, coatings and offset overprint varnishes. 收起 | |
| HK-100 | Tridev Resins (India) Pvt. Ltd. | HK-100 is a bright granular resin which exhibits good light fastness, neutral reaction and resistance to saponification. It has good solubility, is compatible with shellac, making it suitable for preparation of polishing varnishes and lacquers for the su...展開 HK-100 is a bright granular resin which exhibits good light fastness, neutral reaction and resistance to saponification. It has good solubility, is compatible with shellac, making it suitable for preparation of polishing varnishes and lacquers for the surface treatment of wood. It is also suitable for use in printing inks, ball point pen inks, flexo and gravure Inks, wood primer and surface coatings. 收起 | |
| HK–1000 | Tridev Resins (India) Pvt. Ltd. | HK–1000 is a pearl shaped, granular solid resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable f...展開 HK–1000 is a pearl shaped, granular solid resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable for ball point pen inks and printing inks. Its good solubility and compatibility with shellac also allows it to be used in the preparation of polishing varnishes and lacquers for the surface treatment of wood. 收起 | |
| HK–1000 (Lumps) | Tridev Resins (India) Pvt. Ltd. | HK–1000 (Lumps) is pale yellow, bright resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable for ...展開 HK–1000 (Lumps) is pale yellow, bright resin which exhibits good light fastness, neutral reaction and resistance to saponification. Due to its high viscosity, high softening range, quick solubility and excellent thixotropic properties, it is suitable for ball point pen inks and printing inks. Its good solubility and compatibility with shellac also allows it to be used in the preparation of polishing varnishes and lacquers for the surface treatment of wood. 收起 | |
| HK–300 Pale Yellow Lumps | Tridev Resins (India) Pvt. Ltd. | HK–300 Pale Yellow Lumps is a ketone resin exhibiting good compatibility, solubility and pigment wetting. It has good water resistance, gloss and improves adhesion in flexographic printing inks, lacquers, ball point pen inks, as well as gravure and scree...展開 HK–300 Pale Yellow Lumps is a ketone resin exhibiting good compatibility, solubility and pigment wetting. It has good water resistance, gloss and improves adhesion in flexographic printing inks, lacquers, ball point pen inks, as well as gravure and screen printing inks. 收起 | |
| HK–500 Pale Yellow Lumps | Tridev Resins (India) Pvt. Ltd. | HK–500 Pale Yellow Lumps is a ketone resin with a high hydroxyl value and melting point. It is designed to provide improved heat resistance and better blocking resistance. Its has a high degree of polarity that improves adhesion, pigment wetting and glos...展開 HK–500 Pale Yellow Lumps is a ketone resin with a high hydroxyl value and melting point. It is designed to provide improved heat resistance and better blocking resistance. Its has a high degree of polarity that improves adhesion, pigment wetting and gloss. It can be used in cellulose lacquers, ball point pen inks and surface coatings. 收起 | |
| HK–600 | Tridev Resins (India) Pvt. Ltd. | HK–600 is a pale colored ketonic resin which offers a broad range of compatibility and good aliphatic and plasticizer tolerance. It imparts chemical resistance to coatings, along with improved adhesion, pigment wetting and gloss. The low viscosity and wid...展開 HK–600 is a pale colored ketonic resin which offers a broad range of compatibility and good aliphatic and plasticizer tolerance. It imparts chemical resistance to coatings, along with improved adhesion, pigment wetting and gloss. The low viscosity and wide range of compatibility make it suitable for high solids coatings and inks. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展開 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展開 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展開 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展開 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展開 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...展開 L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 收起 | |
| L-2842 | Chan Sieh Enterprises Co, Ltd. | L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings. | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...展開 L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 收起 | |
| L-2908 | Chan Sieh Enterprises Co, Ltd. | L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...展開 L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. 收起 | |
| L-2909 | Chan Sieh Enterprises Co, Ltd. | L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...展開 L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. 收起 | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...展開 L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. 收起 | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...展開 L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. 收起 | |
| L-2946 | Chan Sieh Enterprises Co, Ltd. | L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...展開 L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. 收起 | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...展開 L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. 收起 | |
| L-2994 | Chan Sieh Enterprises Co, Ltd. | L-2994 is an aliphatic polyester polyol featuring good flexibility and adherence to plastic. This product is well suited for use in flexo and gravure printing inks. | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...展開 L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 收起 | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...展開 L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 收起 | |
| L-3952 | Chan Sieh Enterprises Co, Ltd. | L-3952 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and BHMR. This product can be used in flat parquet lacquers, printing inks, and decorative paints. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| P-103 | Chan Sieh Enterprises Co, Ltd. | P-103 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H | Chan Sieh Enterprises Co, Ltd. | P-103H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H-1 | Chan Sieh Enterprises Co, Ltd. | P-103H-1 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104 | Chan Sieh Enterprises Co, Ltd. | P-104 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104H | Chan Sieh Enterprises Co, Ltd. | P-104H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-125U | Chan Sieh Enterprises Co, Ltd. | P-125U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-145U | Chan Sieh Enterprises Co, Ltd. | P-145U is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-155U | Chan Sieh Enterprises Co, Ltd. | P-155U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-2026 | Chan Sieh Enterprises Co, Ltd. | P-2026 is a vinyl acetate acrylic copolymer in the form of a white emulsion. This product has good color value and pigment adhesion. It can be used as a binder for pigment printing. It is suitable for cotton fabrics. | |
| P-645 | Chan Sieh Enterprises Co, Ltd. | P-645 is a self-crosslinking acrylic resin in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-145 | Chan Sieh Enterprises Co, Ltd. | PB-145 is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-155 | Chan Sieh Enterprises Co, Ltd. | PB-155 is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展開 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 |
