| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuarane CRP 3300 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3300 is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP 3500A | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 3500A is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP 7005B | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP 7005B is a liquid, waterborne polyurethane dispersion that displays good corrosion, alkali, and hydrolysis resistance. This product is ideal for use in plastic, metal, and textile coating applications. | |
| Akuarane CRP SR 1310 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1310 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane CRP SR 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1330 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...展開 Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. 收起 | |
| Aldehyde Resin KY-A81 | Yueyang Keyuan Innovative Materials Co., Ltd. | Aldehyde Resin KY-A81 can be used in various solvent-based paints, solvent-based inks, solvent-free coatings, water-based coatings, powder coatings and has compatibility with some resins. Examples of the resin's use are in car mending paints. It can also...展開 Aldehyde Resin KY-A81 can be used in various solvent-based paints, solvent-based inks, solvent-free coatings, water-based coatings, powder coatings and has compatibility with some resins. Examples of the resin's use are in car mending paints. It can also be used as a carrier for pigment paste. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...展開 Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. 收起 | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展開 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起 | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...展開 BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. 收起 | |
| BM52 | Pioneer Chemicals Co., Ltd. | BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...展開 BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. 收起 | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...展開 BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...展開 BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM70 | Pioneer Chemicals Co., Ltd. | BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...展開 BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...展開 Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. 收起 | |
| Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
| Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...展開 Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. 收起 | |
| Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...展開 Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. 收起 | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...展開 Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. 收起 | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...展開 Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| KY-120 Ketone Resin | Yueyang Keyuan Innovative Materials Co., Ltd. | KY-120 Ketone Resin is a condensation from cyclohexanone that is bright and resistant to hydrolysis. It can be used in many types of inks, paints and coating formulations and can also be used in the manufacturing of pigment pastes. | |
| KY-A81 Aldehyde Resin | Yueyang Keyuan Innovative Materials Co., Ltd. | KY-A81 Aldehyde Resin is a suitable resin for many solvent-based paints and inks including car mending paints. It can also be used in various coatings and as a pigment carrier in a paste form. | |
| MB-10 | Pioneer Chemicals Co., Ltd. | MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...展開 MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. 收起 | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...展開 MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. 收起 | |
| MB-311 | Pioneer Chemicals Co., Ltd. | MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...展開 MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. 收起 | |
| MB-6 | Pioneer Chemicals Co., Ltd. | MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic sol...展開 MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic solvents including chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it can solely be dissolved by high alcohols. With good solvent release ability, it also has excellent compatibility with other film forming resins, for instance chlorinated rubber, plasticizer, vinyl resins, and NC. MB-6 is broadly used in screen printing inks, container coatings, marine paints, masonry coatings, general purpose coatings, concrete coatings, external wall coatings, general purpose printing inks, concrete sealants, and road marker paints. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.23 to 0.30. 收起 | |
| MB-8 | Pioneer Chemicals Co., Ltd. | MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several org...展開 MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several organic solvents including ketones, aromatic hydrocarbons, esters, and has good compatibility with plasticizers, NC, CAB, and vinyl resin. MB-8 is broadly applied in leather treating agent, gilding material coatings, plastic coatings, printing inks, and PVC printing inks and coatings. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.37 to 0.43. 收起 | |
| MB-9 | Pioneer Chemicals Co., Ltd. | MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin ...展開 MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin with admirable durability, gloss, hardness, and heat resistance for use in adhesives, road marking, construction coatings, road coatings, miscellaneous ink, aerosol lacquers, plastic coating, ceramic coating, metal coatings, printing inks, and wood finishes. It has a molecular weight of 200,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.53 to 0.59. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| PChem® BM11 | Pioneer Chemicals Co., Ltd. | PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展開 PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, printing inks for soft PVC, and leather finishes. It has a molecular weight of 85,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.36. 收起 | |
| PChem® BM111 | Pioneer Chemicals Co., Ltd. | PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be di...展開 PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks, plastic coating, marine coating. PChem® BM111 has a molecular weight of 110,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.48. 收起 | |
| PChem® BM112A | Pioneer Chemicals Co., Ltd. | PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally ...展開 PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally used in applications of aluminum sealer, paper printing, and UV curing technology. PChem® BM112A has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® BM131 | Pioneer Chemicals Co., Ltd. | PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vin...展開 PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks. marine coating, plastic coating, gravure inks, and good for flexographic inks. It has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...展開 PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM17 | Pioneer Chemicals Co., Ltd. | PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展開 PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, and inks for smoking materials. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| Pchem® BM24G | Pioneer Chemicals Co., Ltd. | Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging varie...展開 Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose, vinyl, and chlorinated rubber. Pchem® BM24G is a binder for manufacturer of printing inks, primers, ceramic transfer lacquers, heat sealing lacquers for aluminum foils and adhesives, and ceramic and glass transfer printing lacquers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46. 收起 | |
| PChem® BM260 | Pioneer Chemicals Co., Ltd. | PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is so...展開 PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is soluble in chlorinated hydrocarbons, esters, glycol ether acetates, ketones, aromatic, glycol ethers, and is a binder for adhesion of polystyrene and aluminum, and that is good for applications of pigmented lacquer and compatible with alkyd resins. PChem® BM260 has a molecular weight of 24,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 7 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM270 | Pioneer Chemicals Co., Ltd. | PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications,...展開 PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications, and is generally used in applications of cover PVC substrates, pigment dispersion, hot process stamping, and more. PChem® BM270 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 124 mgKOH/g, and an inherent viscosity of 0.31. 收起 | |
| PChem® BM51 | Pioneer Chemicals Co., Ltd. | PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, a...展開 PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is compatible with a wide selection of other resins including polyesters, acrylics, vinyl, and is applicable in coatings and inks with alcohol resistance. PChem® BM51 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® BM60 | Pioneer Chemicals Co., Ltd. | PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展開 PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 10.0 mgKOH/g, and an inherent viscosity of 0.18. 收起 | |
| PChem® BM60E | Pioneer Chemicals Co., Ltd. | PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展開 PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 35,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 8.5 mgKOH/g, and an inherent viscosity of 0.17. 收起 | |
| PChem® BM66 | Pioneer Chemicals Co., Ltd. | PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展開 PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, concrete coatings, marine coating, plastic coating, gravure inks, silk screen printing inks. PChem® BM66 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® BM66D | Pioneer Chemicals Co., Ltd. | PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展開 PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of road marking, marine coating, plastic coating, PVC printing inks, gravure inks, paints for wall, and silk screen printing inks. PChem® BM66D has a molecular weight of 45,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.25. 收起 | |
| PChem® BM71 | Pioneer Chemicals Co., Ltd. | PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展開 PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC replacement in automotive plastisol, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM71 has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.54. 收起 | |
| PChem® BM72 | Pioneer Chemicals Co., Ltd. | PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展開 PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM72 has a molecular weight of 32,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.15. 收起 | |
| PChem® BM76 | Pioneer Chemicals Co., Ltd. | PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, P...展開 PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring, protective coatings, gravure inks, and silk screen printing inks. PChem® BM76 has a molecular weight of 105,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.37. 收起 | |
| PChem® BM81 | Pioneer Chemicals Co., Ltd. | PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and AB...展開 PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of silk screen printing inks, marine coating, inks, gravure inks, and plastic coating. PChem® BM81 has a molecular weight of 30,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.12. 收起 | |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a b...展開 PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. 收起 | |
| PChem® BM99 | Pioneer Chemicals Co., Ltd. | PChem® BM99, in the form of a pellet, is a copolymer of methyl methacrylate that has a high heat resistance and good pigment dispersion property. It is compatible with ketone solvents and commonly used in application of inks for packaging materials and ho...展開 PChem® BM99, in the form of a pellet, is a copolymer of methyl methacrylate that has a high heat resistance and good pigment dispersion property. It is compatible with ketone solvents and commonly used in application of inks for packaging materials and hot process stamping. PChem® BM99 has a molecular weight of 20,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 78 mgKOH/g. 收起 | |
| PChem® MB-10-B | Pioneer Chemicals Co., Ltd. | PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substr...展開 PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substrates. PChem® MB-10-B is commonly used in applications of inks for lithographic heat transfers, inks for PET coated films and papers, ceramic transfer printing inks, containers and packaging, aerosol paints, adhesives, coatings on aluminum foils, and packaging inks. It has a molecular weight of 160,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.45. 收起 | |
| PChem® MB-11 | Pioneer Chemicals Co., Ltd. | PChem® MB-11, in the form of a bead, is a copolymer of ethyl methacrylate and butyl methacrylate and is soluble in glycol ether acetates and glycol ethers, alcohols, aromatic, esters, and ketones. It is a binder for applications of gravure inks, BOPP film...展開 PChem® MB-11, in the form of a bead, is a copolymer of ethyl methacrylate and butyl methacrylate and is soluble in glycol ether acetates and glycol ethers, alcohols, aromatic, esters, and ketones. It is a binder for applications of gravure inks, BOPP film adhesions, wood finishes lacquers, plastic coating, flexographic inks, and resin for printing ink. PChem® MB-11 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 6.0 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® MB-11-A | Pioneer Chemicals Co., Ltd. | PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem...展開 PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem® MB-11-A has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 9.0 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® MB-17 | Pioneer Chemicals Co., Ltd. | PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl...展開 PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® MB-17 is very compatible with many nitrocellulose and solvents, and commonly used in applications of silk screen printing inks, marine coating, gravure inks, plastic coating, multi-usage ink, and tobacco packaging ink. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.41. 收起 | |
| PChem® MB-313 | Pioneer Chemicals Co., Ltd. | PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provid...展開 PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provides admirable fast drying characteristics and solvent release ability and it has good pigment wetting properties when used in coating and ink formulations. PChem® MB-313 is for universal applications of exterior paints and metal coatings. It has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 9 mgKOH/g, and an inherent viscosity of 0.23. 收起 | |
| PChem® MB-38 | Pioneer Chemicals Co., Ltd. | PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including...展開 PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including chlorinated rubber resins, nitrocellulose, acrylics, vinyl, and is a good binder for manufacturer of alkyd resins additive, printing inks, heat sealing lacquers for adhesives and aluminum foils, ceramic transfer lacquers, and primers. PChem® MB-38 has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. 收起 | |
| PChem® MB-4 | Pioneer Chemicals Co., Ltd. | PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and...展開 PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-4 is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.18. 收起 | |
| PChem® MB-6-A | Pioneer Chemicals Co., Ltd. | PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, a...展開 PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-6-A is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® MB-605 | Pioneer Chemicals Co., Ltd. | PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide vari...展開 PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide variety of other resins, such as nitrocellulose, acrylics, vinyl, and is for use in solvent-based inks. PChem® MB-605 has a molecular weight of 8,200 g/mol, moisture content of equal to or less than 1.0%, acid value of 53 mgKOH/g, and an inherent viscosity of 0.06. 收起 | |
| PChem® MB-9-B | Pioneer Chemicals Co., Ltd. | PChem® MB-9-B, in the form of a bead, is a polymer of iso-butyl methacrylate thacrylate that offers high durability, flexibility, heat resistance, and good gloss. It is easily soluble in several organic solvents such as high alcohol, ketones, esters, chlo...展開 PChem® MB-9-B, in the form of a bead, is a polymer of iso-butyl methacrylate thacrylate that offers high durability, flexibility, heat resistance, and good gloss. It is easily soluble in several organic solvents such as high alcohol, ketones, esters, chlorinated solvent, aromatic hydrocarbons, and white gasoline. PChem® MB-9-A can be used as its modifying agent, based on its good compatibility with middle/long oil alkyd resin. It is also compatible with chlorinated paraffin, PVC resin, and it offers admirable pigment wet-ability. PChem® MB-9-A is applied to plastic coatings, alkyd modified coatings, leather finishes, metal coatings, and gilding material coatings (adhesive layer), PVC printing inks and coatings. It has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. 收起 | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展開 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展開 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展開 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展開 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展開 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展開 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展開 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| Was A-81 Aldehyde Resin | Yueyang Keyuan Innovative Materials Co., Ltd. | Was A-81 Aldehyde Resin is a colorless or yellowish aldehyde polycondensation resin that is insoluble in water, but can dissolve in most organic solvents and paint/ink formulations. This product is commonly used for general paste grinding resin and in co...展開 Was A-81 Aldehyde Resin is a colorless or yellowish aldehyde polycondensation resin that is insoluble in water, but can dissolve in most organic solvents and paint/ink formulations. This product is commonly used for general paste grinding resin and in coating formulation. 收起 | |
| Zinc Stearate for Coating and Paint | Dongguan CHNV New Material Technology Co., Ltd. | Zinc Stearate for Coating and Paint provides advantages such as low fatty acid, high purity, good transparency, super-fineness, dispersing, and more. Zinc Stearate for Coating and Paint is widely applied in furniture coating, upscale ink, automotive coati...展開 Zinc Stearate for Coating and Paint provides advantages such as low fatty acid, high purity, good transparency, super-fineness, dispersing, and more. Zinc Stearate for Coating and Paint is widely applied in furniture coating, upscale ink, automotive coating, marine coating, powder coating, plastics, polymer resin, fiber rubber, paper, cosmetics, powder metallurgy, and cement product industries. 收起 |
