| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展開 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展開 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展開 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展開 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展開 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起 | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展開 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展開 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展開 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展開 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| GarLAS 16/50 | Ganga Rasayanie (Pvt) Ltd | GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 1924 | Ganga Rasayanie (Pvt) Ltd | GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035 | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035C | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 20/40 | Ganga Rasayanie (Pvt) Ltd | GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GaroMAX™ 21/60 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, m...展開 GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 21/60A | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, ...展開 GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 4546 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, me...展開 GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, meta...展開 GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46B | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, met...展開 GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroSOL™ 100 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 110 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 155 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 160 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 180 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 300 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GrintoSOL™ 1924 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and min...展開 GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2427 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and min...展開 GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2428 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and min...展開 GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2535 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and min...展開 GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2629 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and min...展開 GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2633 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2633 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 320, and is often used in ink oils and min...展開 GrintoSOL™ 2633 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 320, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展開 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展開 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展開 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展開 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展開 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展開 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展開 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展開 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 |
