| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展開 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展開 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展開 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展開 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展開 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展開 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展開 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展開 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展開 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展開 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展開 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展開 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展開 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展開 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展開 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展開 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展開 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展開 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展開 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展開 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展開 STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展開 STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...展開 STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. 收起 | |
| T. Blue H5G | Camex Limited | T. Blue H5G is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings...展開 T. Blue H5G is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. 收起 | |
| T. Blue HA | Camex Limited | T. Blue HA is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Toluene | TOP Solvent Company Limited | Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展開 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PM | TOP Solvent Company Limited | TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展開 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PMA | TOP Solvent Company Limited | TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展開 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| Trimethylolpropane Triacrylate (TMPTA) | Beijing RBL Chemicals Co., Ltd. | Trimethylolpropane Triacrylate (TMPTA) is an acrylate monomer that has high crosslink density and low volatility. This product appears as a clear liquid, and it can be used in coatings, inks, and adhesives. | |
| Tripropylene Glycol Diacrylate (TPGDA) | Beijing RBL Chemicals Co., Ltd. | Tripropylene Glycol Diacrylate (TPGDA) is an acrylate monomer that has low viscosity, low volatility, and good flexibility. This product appears as a clear liquid, and it can be used in coatings, inks, and adhesives. | |
| Turquoise Blue CABN | Camex Limited | Turquoise Blue CABN is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Turquoise Blue G | Camex Limited | Turquoise Blue G is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展開 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展開 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展開 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展開 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起 | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展開 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起 | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| Violet 5R | Camex Limited | Violet 5R is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Violet C4R | Camex Limited | Violet C4R is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Violet CAFR | Camex Limited | Violet CAFR is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| VR® 100 Bright White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 100 Bright White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 100 Bright White has a specific gravity of 2.7 to 3.1...展開 VR® 100 Bright White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 100 Bright White has a specific gravity of 2.7 to 3.1 g/cm3, a bulk density of 14 to 20 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 1000 Bright White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 1000 Bright White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 1000 Bright White has a specific gravity of 2.7 to 3...展開 VR® 1000 Bright White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 1000 Bright White has a specific gravity of 2.7 to 3.1 g/cm3, a bulk density of 14 to 20 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 101 Irradiant White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 101 Irradiant White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 101 Irradiant White has a specific gravity of 2.7 ...展開 VR® 101 Irradiant White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 101 Irradiant White has a specific gravity of 2.7 to 3.1 g/cm3, a bulk density of 14 to 20 g/100ml, a particle size 90% within the range of 30 to 70 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 103 Bright Silver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 103 Bright Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 103 Bright Silver has a specific gravity of 2.8 to 3...展開 VR® 103 Bright Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 103 Bright Silver has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 17 to 25 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 104 Silk Silver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 104 Silk Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 104 Silk Silver has a specific gravity of 2.8 to 3.2 g...展開 VR® 104 Silk Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 104 Silk Silver has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 17 to 25 g/100ml, a particle size 90% within the range of 10 to 40 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 110 Glossy White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 110 Glossy White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 110 Glossy White has a specific gravity of 2.8 to 3.2...展開 VR® 110 Glossy White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 110 Glossy White has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 17 to 25 g/100ml, a particle size 90% within the range of less than 15 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 111 Glossy Silver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 111 Glossy Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 111 Glossy Silver has a specific gravity of 2.8 to 3...展開 VR® 111 Glossy Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 111 Glossy Silver has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 17 to 25 g/100ml, a particle size 90% within the range of less than 15 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 119 Fine Sliver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 119 Fine Sliver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 119 Fine Sliver has a specific gravity of 2.8 to 3.2 g...展開 VR® 119 Fine Sliver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 119 Fine Sliver has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 18 to 26 g/100ml, a particle size 90% within the range of 5 to 20 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 120 Luster White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 120 Luster White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 120 Luster White has a specific gravity of 2.8 to 3.2...展開 VR® 120 Luster White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 120 Luster White has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 17 to 25 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 121 Luster Silver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 121 Luster Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 121 Luster Silver has a specific gravity of 2.8 to 3...展開 VR® 121 Luster Silver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 121 Luster Silver has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 19 to 26 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 123 Glary Sliver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 123 Glary Sliver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 123 Glary Sliver has a specific gravity of 2.9 to 3.2...展開 VR® 123 Glary Sliver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 123 Glary Sliver has a specific gravity of 2.9 to 3.2 g/cm3, a bulk density of 20 to 27 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 151 Flash White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 151 Flash White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 151 Flash White has a specific gravity of 2.5 to 3.0 g...展開 VR® 151 Flash White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 151 Flash White has a specific gravity of 2.5 to 3.0 g/cm3, a bulk density of 13 to 19 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 152 Sheen Sliver | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 152 Sheen Sliver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 152 Sheen Sliver has a specific gravity of 2.5 to 3.0...展開 VR® 152 Sheen Sliver is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 152 Sheen Sliver has a specific gravity of 2.5 to 3.0 g/cm3, a bulk density of 13 to 19 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 153 Glitter White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 153 Glitter White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 153 Glitter White has a specific gravity of 2.5 to 3...展開 VR® 153 Glitter White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 153 Glitter White has a specific gravity of 2.5 to 3.0 g/cm3, a bulk density of 12 to 19 g/100ml, a particle size 90% within the range of 20 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 154 Twinkle White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 154 Twinkle White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 154 Twinkle White has a specific gravity of 2.5 to 3...展開 VR® 154 Twinkle White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 154 Twinkle White has a specific gravity of 2.5 to 3.1 g/cm3, a bulk density of 12 to 18 g/100ml, a particle size 90% within the range of 30 to 150 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 163 Sparkle White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 163 Sparkle White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 163 Sparkle White has a specific gravity of 2.5 to 2...展開 VR® 163 Sparkle White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 163 Sparkle White has a specific gravity of 2.5 to 2.9 g/cm3, a bulk density of 12 to 18 g/100ml, a particle size 90% within the range of 40 to 200 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 173 Silk White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 173 Silk White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 173 Silk White has a specific gravity of 2.7 to 3.1 g/c...展開 VR® 173 Silk White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 173 Silk White has a specific gravity of 2.7 to 3.1 g/cm3, a bulk density of 15 to 21 g/100ml, a particle size 90% within the range of 10 to 40 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 183 Sparkle White | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 183 Sparkle White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 183 Sparkle White has a specific gravity of 2.4 to 2...展開 VR® 183 Sparkle White is in the form of a white powder, odorless, white reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 183 Sparkle White has a specific gravity of 2.4 to 2.9 g/cm3, a bulk density of 8 to 14 g/100ml, a particle size 90% within the range of 50 to 500 μm, a pH of 6 to 10, and oil absorption of 50 to 90 g oil/100g power. 收起 | |
| VR® 201 Glossy Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 201 Glossy Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 201 Glossy Gold has a specific gravity of 2.8 to 3.3 g/c...展開 VR® 201 Glossy Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 201 Glossy Gold has a specific gravity of 2.8 to 3.3 g/cm3, a bulk density of 26 to 32 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 205 Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 205 Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 205 Gold has a specific gravity of 2.7 to 3.2 g/cm3, a bulk den...展開 VR® 205 Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 205 Gold has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 24 to 30 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 211 Glossy Red | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 211 Glossy Red is in the form of a white powder, odorless, red reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 211 Glossy Red has a specific gravity of 2.8 to 3.3 g/cm3...展開 VR® 211 Glossy Red is in the form of a white powder, odorless, red reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 211 Glossy Red has a specific gravity of 2.8 to 3.3 g/cm3, a bulk density of 26 to 32 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 215 Red | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 215 Red is in the form of a red powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 215 Red has a specific gravity of 2.7 to 3.2 g/cm3, a bulk densit...展開 VR® 215 Red is in the form of a red powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 215 Red has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 24 to 30 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 216 Pink | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 216 Pink is in the form of a pink powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 216 Pink has a specific gravity of 2.8 to 3.2 g/cm3, a bulk den...展開 VR® 216 Pink is in the form of a pink powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 216 Pink has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 26 to 30 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 217 Copper | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 217 Copper is in the form of a white powder, odorless, copper reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 217 Copper has a specific gravity of 2.6 to 3.2 g/cm3, a b...展開 VR® 217 Copper is in the form of a white powder, odorless, copper reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 217 Copper has a specific gravity of 2.6 to 3.2 g/cm3, a bulk density of 24 to 30 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 219 Violet | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 219 Violet is in the form of a white powder, odorless, violet reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 219 Violet has a specific gravity of 2.6 to 3.2 g/cm3, a b...展開 VR® 219 Violet is in the form of a white powder, odorless, violet reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 219 Violet has a specific gravity of 2.6 to 3.2 g/cm3, a bulk density of 28 to 34 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 221 Glossy Blue | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 221 Glossy Blue is in the form of a white powder, odorless, blue reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 221 Glossy Blue has a specific gravity of 2.8 to 3.4 g/...展開 VR® 221 Glossy Blue is in the form of a white powder, odorless, blue reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 221 Glossy Blue has a specific gravity of 2.8 to 3.4 g/cm3, a bulk density of 29 to 35 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 223 Glossy Violet | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 223 Glossy Violet is in the form of a white powder, odorless, violet reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 223 Glossy Violet has a specific gravity of 2.8 to ...展開 VR® 223 Glossy Violet is in the form of a white powder, odorless, violet reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 223 Glossy Violet has a specific gravity of 2.8 to 3.3 g/cm3, a bulk density of 29 to 35 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 225 Blue | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 225 Blue is in the form of a white powder, odorless, blue reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 225 Blue has a specific gravity of 2.8 to 3.2 g/cm3, a bulk de...展開 VR® 225 Blue is in the form of a white powder, odorless, blue reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 225 Blue has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 28 to 34 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 231 Glossy Green | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 231 Glossy Green is in the form of a white powder, odorless, green reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 231 Glossy Green has a specific gravity of 2.8 to 3.4...展開 VR® 231 Glossy Green is in the form of a white powder, odorless, green reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 231 Glossy Green has a specific gravity of 2.8 to 3.4 g/cm3, a bulk density of 32 to 40 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 235 Green | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 235 Green is in the form of a white powder, odorless, green reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 235 Green has a specific gravity of 2.8 to 3.2 g/cm3, a bulk...展開 VR® 235 Green is in the form of a white powder, odorless, green reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 235 Green has a specific gravity of 2.8 to 3.2 g/cm3, a bulk density of 30 to 38 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 249 Flash Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 249 Flash Gold is in the form of a white powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 249 Flash Gold has a specific gravity of 2.6 to 3.1 g/cm...展開 VR® 249 Flash Gold is in the form of a white powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 249 Flash Gold has a specific gravity of 2.6 to 3.1 g/cm3, a bulk density of 24 to 30 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 259 Flash Red | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 259 Flash Red is in the form of a white powder, odorless, red reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 259 Flash Red has a specific gravity of 2.6 to 3.1 g/cm3, ...展開 VR® 259 Flash Red is in the form of a white powder, odorless, red reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 259 Flash Red has a specific gravity of 2.6 to 3.1 g/cm3, a bulk density of 25 to 31 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 269 Flash Violet | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 269 Flash Violet is in the form of a white powder, odorless, violet reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 269 Flash Violet has a specific gravity of 2.6 to 3....展開 VR® 269 Flash Violet is in the form of a white powder, odorless, violet reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 269 Flash Violet has a specific gravity of 2.6 to 3.1 g/cm3, a bulk density of 26 to 32 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 289 Flash Blue | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 289 Flash Blue is in the form of a white powder, odorless, blue reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 289 Flash Blue has a specific gravity of 2.7 to 3.2 g/cm...展開 VR® 289 Flash Blue is in the form of a white powder, odorless, blue reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 289 Flash Blue has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 26 to 32 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 299 Flash Green | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 299 Flash Green is in the form of a white powder, odorless, green reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 299 Flash Green has a specific gravity of 2.7 to 3.2 g...展開 VR® 299 Flash Green is in the form of a white powder, odorless, green reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 299 Flash Green has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 29 to 35 g/100ml, a particle size 90% within the range of 10 to 100 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 300 Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 300 Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 300 Gold has a specific gravity of 2.7 to 3.3 g/cm3, a bulk den...展開 VR® 300 Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 300 Gold has a specific gravity of 2.7 to 3.3 g/cm3, a bulk density of 22 to 28 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 302 Glossy Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 302 Glossy Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 302 Glossy Gold has a specific gravity of 2.9 to 3.4 g/c...展開 VR® 302 Glossy Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 302 Glossy Gold has a specific gravity of 2.9 to 3.4 g/cm3, a bulk density of 23 to 30 g/100ml, a particle size 90% within the range of 5 to 25 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 303 Deep Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 303 Deep Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 303 Deep Gold has a specific gravity of 2.7 to 3.2 g/cm3, ...展開 VR® 303 Deep Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 303 Deep Gold has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 21 to 27 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 304 Mayan Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 304 Mayan Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 304 Mayan Gold has a specific gravity of 2.7 to 3.2 g/cm3...展開 VR® 304 Mayan Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 304 Mayan Gold has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 22 to 28 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 305 Red Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 305 Red Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 305 Red Gold has a specific gravity of 2.7 to 3.2 g/cm3, a ...展開 VR® 305 Red Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 305 Red Gold has a specific gravity of 2.7 to 3.2 g/cm3, a bulk density of 21 to 27 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 306 Olympic Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 306 Olympic Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 306 Olympic Gold has a specific gravity of 2.8 to 3.3 g...展開 VR® 306 Olympic Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 306 Olympic Gold has a specific gravity of 2.8 to 3.3 g/cm3, a bulk density of 20 to 26 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 307 Black Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 307 Black Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 307 Black Gold has a specific gravity of 2.8 to 3.3 g/cm3...展開 VR® 307 Black Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 307 Black Gold has a specific gravity of 2.8 to 3.3 g/cm3, a bulk density of 20 to 26 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 308 Green Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 308 Green Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 308 Green Gold has a specific gravity of 2.8 to 3.3 g/cm3...展開 VR® 308 Green Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 308 Green Gold has a specific gravity of 2.8 to 3.3 g/cm3, a bulk density of 24 to 30 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 | |
| VR® 320 Sunlight Gold | Guangdong Volor Pearl Pigment Co.,Ltd. | VR® 320 Sunlight Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 320 Sunlight Gold has a specific gravity of 2.7 to 3.3...展開 VR® 320 Sunlight Gold is in the form of a gold powder, odorless, gold reflection with luster that is insoluble in solvent or water. Its suggested applications are in inks, plastics, coatings, etc. VR® 320 Sunlight Gold has a specific gravity of 2.7 to 3.3 g/cm3, a bulk density of 22 to 28 g/100ml, a particle size 90% within the range of 10 to 60 μm, a pH of 6 to 10, and oil absorption of 50 to 90g oil/100g power. 收起 |
