| 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) | Beijing RBL Chemicals Co., Ltd. | 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzidine Yellow G (1138-121) | Ggink International Limited | Benzidine Yellow G (1138-121) is a reddish/yellow diarylide pigment with a CI Number of 21090 (PY 12). This product provides gloss, dispersion and flow properties. Benzidine Yellow G (1138-121) is used in publication gravure applications. | |
| Benzidine Yellow G (1138-O) | Ggink International Limited | Benzidine Yellow G (1138-O) is a semi-opaque, yellow, diarylide pigment with a CI number of 21090 (PY 12). This product provides long flow properties. Benzidine Yellow G (1138-O) is used in web offset news ink, web offset heatset ink and sheetfed ink appl...展開 Benzidine Yellow G (1138-O) is a semi-opaque, yellow, diarylide pigment with a CI number of 21090 (PY 12). This product provides long flow properties. Benzidine Yellow G (1138-O) is used in web offset news ink, web offset heatset ink and sheetfed ink applications. 收起 | |
| Benzidine Yellow G (1138-OH) | Ggink International Limited | Benzidine Yellow G (1138-OH) is a transparent yellow pigment with a CI Number of 21090 (PY 12). This product provides flow and tinting properties for processing color. Benzidine Yellow G (1138-OH) can be used in web offset news and heatset ink, and sheetf...展開 Benzidine Yellow G (1138-OH) is a transparent yellow pigment with a CI Number of 21090 (PY 12). This product provides flow and tinting properties for processing color. Benzidine Yellow G (1138-OH) can be used in web offset news and heatset ink, and sheetfed ink. 收起 | |
| Benzidine Yellow G (1138-T/99) | Ggink International Limited | Benzidine Yellow G (1138-T/99) is a transparent, greenish shade pigment with a CI Number of 21090 (PY 12). This product has high tinting strength for process color. Benzidine Yellow G (1138-T/99) is used in web offset news ink, web offset heatset ink and ...展開 Benzidine Yellow G (1138-T/99) is a transparent, greenish shade pigment with a CI Number of 21090 (PY 12). This product has high tinting strength for process color. Benzidine Yellow G (1138-T/99) is used in web offset news ink, web offset heatset ink and sheetfed ink applications. 收起 | |
| Benzidine Yellow G (1138-TR) | Ggink International Limited | Benzidine Yellow G (1138-TR) is a transparent, greenish/yellow shade pigment with a CI Number of 21090 (PY 12). This product provides gloss and flow properties. Benzidine Yellow G (1138-TR) is used in NC/alcohol ink, co-solvent polyamide and laroflex/Clpp...展開 Benzidine Yellow G (1138-TR) is a transparent, greenish/yellow shade pigment with a CI Number of 21090 (PY 12). This product provides gloss and flow properties. Benzidine Yellow G (1138-TR) is used in NC/alcohol ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Benzidine Yellow G (1138-W (321)) | Ggink International Limited | Benzidine Yellow G (1138-W (321)) is a semi-opaque greenish yellow pigment with a CI Number of 21090 (PY 12). This product provides water stability and high tinting properties. Benzidine Yellow G (1138-W (321)) is used in water based ink, polyvinybutyral ...展開 Benzidine Yellow G (1138-W (321)) is a semi-opaque greenish yellow pigment with a CI Number of 21090 (PY 12). This product provides water stability and high tinting properties. Benzidine Yellow G (1138-W (321)) is used in water based ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Brilliant Yellow 5GX (1136-SB) | Ggink International Limited | Brilliant Yellow 5GX (1136-SB) is an opaque, greenish yellow pigment with a Color Index of PY 74. This product provides light and weather fastness properties. Brilliant Yellow 5GX (1136-SB) has applications in water based inks, NC/Alcohol inks, Polyvinylb...展開 Brilliant Yellow 5GX (1136-SB) is an opaque, greenish yellow pigment with a Color Index of PY 74. This product provides light and weather fastness properties. Brilliant Yellow 5GX (1136-SB) has applications in water based inks, NC/Alcohol inks, Polyvinylbutanyl ink, Co-solvent polyamide and Laroflex/Clpp inks. 收起 | |
| Brilliant Yellow 5GX (1136-W) | Ggink International Limited | Brilliant Yellow 5GX (1136-W) is a greenish yellow pigment with a Color Index Number of 11741 (PY 74). This product provides gloss and transparency properties. Brilliant Yellow 5GX (1136-W) is used in water based ink and NC/alcohol ink applications. | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Carmine 4B-330 (3164) | Ggink International Limited | Carmine 4B-330 (3164) is a transparent, blue shade, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides gloss and flow properties. Carmine 4B-330 (3164) is used in water based ink, NC/alcohol, polyvinybutyral ink, co-solve...展開 Carmine 4B-330 (3164) is a transparent, blue shade, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides gloss and flow properties. Carmine 4B-330 (3164) is used in water based ink, NC/alcohol, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Carmine 4B-340 (3164) | Ggink International Limited | Carmine 4B-340 (3164) is a very transparent, blue shade, rubine pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides gloss and flow properties. Carmine 4B-340 (3164) is used in water based ink, NC/alcohol ink, Polyvinybutyral ink,...展開 Carmine 4B-340 (3164) is a very transparent, blue shade, rubine pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides gloss and flow properties. Carmine 4B-340 (3164) is used in water based ink, NC/alcohol ink, Polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Carmine 4BE (3164) | Ggink International Limited | Carmine 4BE (3164) is a transparent, bright mid shade, rubine pigment with a Color Index of 15850.1 (PR 57:1). This product provides gloss and flow properties. Carmine 4BE (3164) is used in water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent ...展開 Carmine 4BE (3164) is a transparent, bright mid shade, rubine pigment with a Color Index of 15850.1 (PR 57:1). This product provides gloss and flow properties. Carmine 4BE (3164) is used in water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Carmine 6BD (3164) | Ggink International Limited | Carmine 6BD (3164) is a medium shade rubine, pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high transparency and high gloss properties. Carmine 6BD (3164) is used in web offset news ink, web offset heatset ink, sheetfed ink...展開 Carmine 6BD (3164) is a medium shade rubine, pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high transparency and high gloss properties. Carmine 6BD (3164) is used in web offset news ink, web offset heatset ink, sheetfed ink, UV curing ink, silk screen ink and metal deco ink applications. 收起 | |
| Carmine 6BE (3164) | Ggink International Limited | Carmine 6BE (3164) is a yellow shade rubine with a color index number of 15850:1 (PR 57:1). This product provides high tinting and medium viscosity properties. Carmin 6BE (3164) is used in web offset news ink, web offset heatset ink, sheetfed ink, silk sc...展開 Carmine 6BE (3164) is a yellow shade rubine with a color index number of 15850:1 (PR 57:1). This product provides high tinting and medium viscosity properties. Carmin 6BE (3164) is used in web offset news ink, web offset heatset ink, sheetfed ink, silk screen ink and metal deco ink applications. 收起 | |
| Carmine 6BH (3164) | Ggink International Limited | Carmine 6BH (3164) is a dispersible pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high gloss properties. Carmine 6BH (3164) is used in web offset news ink, web offset heatset ink, sheefed ink, UV curing ink, silk screen ink...展開 Carmine 6BH (3164) is a dispersible pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high gloss properties. Carmine 6BH (3164) is used in web offset news ink, web offset heatset ink, sheefed ink, UV curing ink, silk screen ink and metal deco ink applications. 收起 | |
| Carmine 6BN (3164) | Ggink International Limited | Carmine 6BN (3164) is a bluish shade pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high gloss and transparency properties. Carmine 6BN (3164) is used in web offset news ink, web offset heats set ink, sheetfed ink, UV curing...展開 Carmine 6BN (3164) is a bluish shade pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high gloss and transparency properties. Carmine 6BN (3164) is used in web offset news ink, web offset heats set ink, sheetfed ink, UV curing ink, silk screen ink and metal deco ink applications. 收起 | |
| Carmine 6BS (3164F) | Ggink International Limited | Carmine 6BS (3164F) is a yellow shade rubine pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high strength and flow properties. Carmine 6BS (3164F) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV c...展開 Carmine 6BS (3164F) is a yellow shade rubine pigment with a Color Index Number of 15850:1 (PR 57:1). This product provides high strength and flow properties. Carmine 6BS (3164F) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV curing ink applications. 收起 | |
| Carmine 6BT (3164B) | Ggink International Limited | Carmine 6BT (3164B) is a transparent, bluish shade, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high strength, high gloss and flow properties. Carmine 6BT (3164B) is used in web offset news ink, web offset heatset ...展開 Carmine 6BT (3164B) is a transparent, bluish shade, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high strength, high gloss and flow properties. Carmine 6BT (3164B) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV curing ink applications. It can also be used in polyvinybutyral ink, co-solvent polyamide, publicaitons gravure and laroflex/Clpp ink applications. 收起 | |
| Colorfast Yellow PG (1180P) | Ggink International Limited | Colorfast Yellow PG (1180P) is a greenish/yellow shade pigment with a Color Index number of 21290 (PY 180). This product provides high color strength, high gloss and transparency properties. Colorfast Yellow PG (1180P) is used water based ink, NC/alcohol ...展開 Colorfast Yellow PG (1180P) is a greenish/yellow shade pigment with a Color Index number of 21290 (PY 180). This product provides high color strength, high gloss and transparency properties. Colorfast Yellow PG (1180P) is used water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and laroflex/clpp ink applications. It is also used as a pigment, in water based, coil coating and powder industrial paint applications. 收起 | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fast Brilliant Red BBC (3120-S) | Ggink International Limited | Fast Brilliant Red BBC (3120-S) is a red, mid shade pigment with a Color Index Number of 15865:2 (PR 48:2). This product provides high gloss and transparency properties. Fast Brilliant Red BBC (3120-S) is used in water based inks, NC/alcohol ink, polyviny...展開 Fast Brilliant Red BBC (3120-S) is a red, mid shade pigment with a Color Index Number of 15865:2 (PR 48:2). This product provides high gloss and transparency properties. Fast Brilliant Red BBC (3120-S) is used in water based inks, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 | |
| Fast Brilliant Red BBC (3120-SF) | Ggink International Limited | Fast Brilliant Red BBC (3120-SF) is a transparent, dispersible pigment with a Color Index number of 15865:2 (PR 48:2). This product provides, high gloss properties. Fast Brilliant Red BBC (3120-SF) is used in web offset news ink, web offset heatset ink, s...展開 Fast Brilliant Red BBC (3120-SF) is a transparent, dispersible pigment with a Color Index number of 15865:2 (PR 48:2). This product provides, high gloss properties. Fast Brilliant Red BBC (3120-SF) is used in web offset news ink, web offset heatset ink, sheefed ink, UV curing ink and metal deco ink applications. 收起 | |
| Fast Brilliant Red BBC (3120-T) | Ggink International Limited | Fast Brilliant Red BBC is a transparent pigment with a Color Index Number of 15865:2 (PR 48:2). This product provides, high gloss properties. Fast Brilliant Red BBC (3120-T) is used in UV curing ink and metal deco ink applications. | |
| Fast Brilliant Red BBM (3126) | Ggink International Limited | Fast Brilliant Red BBM (3126) is a medium opaque pigment with a Color Index number of 15865:4 (PR 48:4). This product provides weather resistance and high viscosity properties. Fast Brilliant Red BBM (3126) is used in NC/alcohol ink applications. | |
| Fast Brilliant Red BBN (3118-S) | Ggink International Limited | Fast Brilliant Red BBN (3118-S) is a yellowish red pigment with a Color Index Number of 15865.2 (PR 48:1). This product provides tinting strength and gloss properties. Fast Brilliant Red BBN (3118-W) is used in water based ink, NC/alcohol and co-solvent p...展開 Fast Brilliant Red BBN (3118-S) is a yellowish red pigment with a Color Index Number of 15865.2 (PR 48:1). This product provides tinting strength and gloss properties. Fast Brilliant Red BBN (3118-W) is used in water based ink, NC/alcohol and co-solvent polyamide applications. 收起 | |
| Fast Brilliant Red BBN (3118-W) | Ggink International Limited | Fast Brilliant Red BBN (3118-W) is a yellowish red pigment with a Color Index Number of 15865:1 (PR 48:1). This product provides heat stability properties. Fast Brilliant Red BBN (3118-W) is used in water based ink applications. | |
| Fast Brilliant Red BBS (3124-S) | Ggink International Limited | Fast Brilliant Red BBS (3124-S) is a yellowish/red shade, pigment with a Color index Number of 15865:3 (PR 48:3). This product provides dispersion properties. Fast Brilliant Red BBS is used in water based ink, NC/alcohol, polyvinybutyral ink and laroflex/...展開 Fast Brilliant Red BBS (3124-S) is a yellowish/red shade, pigment with a Color index Number of 15865:3 (PR 48:3). This product provides dispersion properties. Fast Brilliant Red BBS is used in water based ink, NC/alcohol, polyvinybutyral ink and laroflex/Clpp ink applications. 收起 | |
| Fast Brilliant Red F2R (3130-423) | Ggink International Limited | Fast Brilliant Red F2R (3130-423) is a transparent yellowish red pigment with a Color Index Number of 12310 (PR 2). This product provides high gloss and alkali stability properties. Fast Brilliant Red F2R (3130-423) is used in water based ink, NC/alcohol ...展開 Fast Brilliant Red F2R (3130-423) is a transparent yellowish red pigment with a Color Index Number of 12310 (PR 2). This product provides high gloss and alkali stability properties. Fast Brilliant Red F2R (3130-423) is used in water based ink, NC/alcohol ink and polyvinybutyral ink applications. 收起 | |
| Fast Orange R (1755) | Ggink International Limited | Fast Orange R (1755) is a clean, yellow shade, orange dianisidine, pigment with a Color Index Number of 21160 (PO 16). This product provides solvent resistant properties. Fast Orange R (1755) is used in web offset news ink, web offset heatset ink, sheetfe...展開 Fast Orange R (1755) is a clean, yellow shade, orange dianisidine, pigment with a Color Index Number of 21160 (PO 16). This product provides solvent resistant properties. Fast Orange R (1755) is used in web offset news ink, web offset heatset ink, sheetfed ink, metal deco ink, water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and saroflex/Clpp applications. 收起 | |
| Fast Pink E (3810) | Ggink International Limited | Fast Pink E (3810) is a transparent, blue shade Quincacridone pigment with a Color Index Number of 73915 (PR 122). This product provides fastness properties. Fast Pink E (3810) is used in water based ink, NC/alcohol ink, polyvinybutyral ink and co-solvent...展開 Fast Pink E (3810) is a transparent, blue shade Quincacridone pigment with a Color Index Number of 73915 (PR 122). This product provides fastness properties. Fast Pink E (3810) is used in water based ink, NC/alcohol ink, polyvinybutyral ink and co-solvent polyamide applications as well as in OEM and refinish automotive paint applications. It is also used solvent based, water based, coil coating and powder industrial paint applications, and solvent and water based decorative paint applications. 收起 | |
| Fast Pink Toner BKF (3691) | Ggink International Limited | Fast Pink Toner BKF (3691) is a bluish pink pigment with a Color Index Number of 45160:2 (PR 169). This product provides flow properties. Fast Pink Toner BKF (3691) is used in water based ink and co-solvent polyamide applications. | |
| Fast Pink Toner R (3262W) | Ggink International Limited | Fast Pink Toner R (3262W) is a yellow shade rhodamine PMA complex pigment with a Color Index Number of 45160:1 (PR 81:1). This product provides stability properties. Fast Pink Toner R (3262W) is used in sheetfed ink. | |
| Fast Red 4B (3662) | Ggink International Limited | Fast Red 4B (3662) is a bluish red pigment with a Color Index Number of 12474 (PR 266). This product is used in water based ink, NC/alcohol ink, polyvinybutyral ink and co-solvent polyamide applications. It is also use in solvent based decorative paint ap...展開 Fast Red 4B (3662) is a bluish red pigment with a Color Index Number of 12474 (PR 266). This product is used in water based ink, NC/alcohol ink, polyvinybutyral ink and co-solvent polyamide applications. It is also use in solvent based decorative paint applications. 收起 | |
| Fast Violet Toner R (6250) | Ggink International Limited | Fast Violet Toner R (6250) is a clean masstone, pigment with a Color Index Number of 42535:2 (PV 3). This product provides long flow and high tinting properties. Fast Violet Toner R (6250) is used in web offset news ink, web offset heatset ink and sheetfe...展開 Fast Violet Toner R (6250) is a clean masstone, pigment with a Color Index Number of 42535:2 (PV 3). This product provides long flow and high tinting properties. Fast Violet Toner R (6250) is used in web offset news ink, web offset heatset ink and sheetfed ink applications. 收起 | |
| Fast Violet Toner R (6250-SB) | Ggink International Limited | Fast Violet Toner R (6250-SB) is a transparent, blue/violet shade methyl pigment with a Color Index number of 42535 (PV 3). This product provides stability properties. Fast Violet Toner R (6250-SB) is used in NC/alcohol ink and co-solvent polyamide applic...展開 Fast Violet Toner R (6250-SB) is a transparent, blue/violet shade methyl pigment with a Color Index number of 42535 (PV 3). This product provides stability properties. Fast Violet Toner R (6250-SB) is used in NC/alcohol ink and co-solvent polyamide applications. 收起 | |
| Fast Violet Toner R (6250-WH) | Ggink International Limited | Fast Violet Toner R (6250-WH) is a blue/violet shade methyl pigment with a Color Index Number of 42535 (PV 3). This product is used in water based inks, co-solvent polyamide and laroflex/Clpp applications. | |
| Fast Yellow 4G (1501) | Ggink International Limited | Fast Yellow 4G (1501) is a dry pigment, with a color index number of 12764 (PY 150). This product is used as a pigment in powder industrial paint and in solvent and water based decorative paint applications. | |
| Fast Yellow G (1201) | Ggink International Limited | Fast Yellow G (1201) is an opaque, yellow diarylid with a Color Index Number of 21090 (PY 12). This product has color strength and flow properties. Fast Yellow G is used in web offset news ink and sheetfed ink. | |
| Fast Yellow G (1203) | Ggink International Limited | Fast Yellow G (1203) is an opaque reddish yellow pigment with a Color Index Number of 21090 (PY 12). This product provides high tinting strength and high gloss properties. Fast Yellow G (1203) is used in water based ink and polyvinybutyral ink application...展開 Fast Yellow G (1203) is an opaque reddish yellow pigment with a Color Index Number of 21090 (PY 12). This product provides high tinting strength and high gloss properties. Fast Yellow G (1203) is used in water based ink and polyvinybutyral ink applications. 收起 | |
| Fast Yellow GR (1126-336) | Ggink International Limited | Fast Yellow GR (1126-336) is a high transparent, reddish yellow pigment with a Color Index number of 21100 (PY 13). This product provides high gloss, high tinting and rheological properties. Fast Yellow GR (1126-336) is used in NC/alcohol ink applications...展開 Fast Yellow GR (1126-336) is a high transparent, reddish yellow pigment with a Color Index number of 21100 (PY 13). This product provides high gloss, high tinting and rheological properties. Fast Yellow GR (1126-336) is used in NC/alcohol ink applications and has limited applications in water based inks. 收起 | |
| Fast Yellow GR (1126B) | Ggink International Limited | Fast Yellow GR (1126B) is a reddish shade, yellow pigment with a Color Index Number of 21100 (PY 12). This product provides flow properties. Fast Yellow GR (1126B) is used in web offset news ink, web offset heatset ink, sheetfed ink, UV curing ink and sil...展開 Fast Yellow GR (1126B) is a reddish shade, yellow pigment with a Color Index Number of 21100 (PY 12). This product provides flow properties. Fast Yellow GR (1126B) is used in web offset news ink, web offset heatset ink, sheetfed ink, UV curing ink and silk screen ink applications. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hansa Yellow 10G (1104-W) | Ggink International Limited | Hanza Yellow 10G (1104-W) is a greenish shade, opaque monoazo pigment with a Color Index Number of 11710 (PY 3). Hansa Yellow 10G (1104-W) is used in water based ink, NC/alcohol ink and co-solvent polyamide applications. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Lake Red C (3110-S) | Ggink International Limited | Lake Red C (3110-S) is a transparent, yellowish shade pigment with a Color Index Number of 15585:1 (PR 53:1). This product provides high gloss and flow properties. Lake Red C (3110-S) is used in web offset news ink, sheetfed ink, UV curing ink, and metal ...展開 Lake Red C (3110-S) is a transparent, yellowish shade pigment with a Color Index Number of 15585:1 (PR 53:1). This product provides high gloss and flow properties. Lake Red C (3110-S) is used in web offset news ink, sheetfed ink, UV curing ink, and metal deco ink. 收起 | |
| Lake Red C (3110-SB) | Ggink International Limited | Lake Red C (3110-SB) is a transparent bluish pigment with a Color Index number of 15585:1 (PR 53:1). This product is used in water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. | |
| Lake Red C (3110-T) | Ggink International Limited | Lake Red C (3110-T) is a transparent, blue shade pigment with a Color Index number 15585:1 (PR 53:1). This product provides flow properties. Lake Red C (3110-T) is used in web offset news ink, sheetfed ink and metal deco ink. | |
| Lake Red C (3110-T(303)) | Ggink International Limited | Lake Red C (3110-T(303)) is a clean, yellow shade pigment with a Color Index Number of 15585:1 (PR 53:1). This product provides flow properties. Lake Red C (3110-T(303)) is used in web offset news ink, sheetfed ink and metal deco ink applications. | |
| Lake Red C (3110-W) | Ggink International Limited | Lake Red C (3110-W) is a transparent, bluish shade with a Color Index number of 15585:1 (PR 53:1). This product provides water stability properties. Lake Red C (3110-W) is used in water based ink applications. | |
| Lithol Red R (3144W) | Ggink International Limited | Lithol Red R (3144W) is a hydrophilic barium, pigment with a Color Index number of 15630:1 (PR 49:1). Lithol Red R (3144W) is used in water based ink applications. | |
| Lithol Red RB (3156W) | Ggink International Limited | Lithol Red RB (3156W) is a blue shade, red calcium naphthol, pigment with a Color Index number of 15630:2 (PR 49:2). This product has hydrophilic properties. Lithol Red RB (3156W) is used in water based ink applications and also in polyvinybutyral ink. | |
| Lithol Rubine BK (3160) | Ggink International Limited | Lithol Rubine BK (3160) is a medium shade rubine with a Color Index number of 15850:1 (PR 57:1). This product provides lithol properties. Lithol Rubine BK (3160) is used in web offset news ink and sheetfed ink applications. | |
| Lithol Rubine RGB (3169) | Ggink International Limited | Lithol Rubine RGB (3169) is a transparent, bluish, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high gloss and flow properties. Lithol Rubine RGB (3169) is used in polyvinybutyral ink, co-solvent polyamide, publicat...展開 Lithol Rubine RGB (3169) is a transparent, bluish, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high gloss and flow properties. Lithol Rubine RGB (3169) is used in polyvinybutyral ink, co-solvent polyamide, publication gravure and laroflex/Clpp ink applications. 收起 | |
| Lithol Rubine RGS (3168B) | Ggink International Limited | Lithol Rubine RGS (3168B) is a dispersible, blue shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product has long flow and solvent resistant properties. Lithol Rubine RGS (3168B) is used in web offset news ink, web offset heatset...展開 Lithol Rubine RGS (3168B) is a dispersible, blue shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product has long flow and solvent resistant properties. Lithol Rubine RGS (3168B) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV curing ink applications. 收起 | |
| Lithol Rubine RGS (3168S) | Ggink International Limited | Lithol Rubine RGS (3168S) is a bluish shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides excellent gloss, high transparency and flow properties. Lithol Rubine RGS (3168S) is used in water based ink, NC/alcohol ink, ...展開 Lithol Rubine RGS (3168S) is a bluish shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides excellent gloss, high transparency and flow properties. Lithol Rubine RGS (3168S) is used in water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide, publication gravure and laroflex/Clpp ink applications. 收起 | |
| Lithol Rubine RGS (3168Y) | Ggink International Limited | Lithol Rubine RGS (3168Y) is a dispersible, yellowish shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product has long flow and solvent resistant properties. Lithol Rubin RGS (3168Y) is used in web offset news ink, web offset hea...展開 Lithol Rubine RGS (3168Y) is a dispersible, yellowish shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product has long flow and solvent resistant properties. Lithol Rubin RGS (3168Y) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV curing ink applications. 收起 | |
| Lithol Rubine RGS (3170-W) | Ggink International Limited | Lithol Rubine RGS (3170-W) is a bluish shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high gloss, high transparency and flow properties. Lithol Rubine RGS (3170-W) is used in water based ink, NC/alcohol ink, pol...展開 Lithol Rubine RGS (3170-W) is a bluish shade rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high gloss, high transparency and flow properties. Lithol Rubine RGS (3170-W) is used in water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. 收起 |
