| 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) | Beijing RBL Chemicals Co., Ltd. | 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzidine Yellow GF1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GF1201 is a diarylide aniline yellow pigment that has high transparency and high tinting strength. The oil absorption of this pigment is 40-50 ml/100g and it has a pH value of 6.0-7.0. This product has a strong resistance to alkali and ac...展開 Benzidine Yellow GF1201 is a diarylide aniline yellow pigment that has high transparency and high tinting strength. The oil absorption of this pigment is 40-50 ml/100g and it has a pH value of 6.0-7.0. This product has a strong resistance to alkali and acid, and it is recommended to be used in offset inks. 收起 | |
| Benzidine Yellow GS1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1201 is a yellow pigment that has high color strength and good liquidity. This pigment has strong physical properties with a density of 1.5 g/cm3, an oil absorption between 40-50 ml/100g, and a pH value of 6.0-7.0. It is commonly used i...展開 Benzidine Yellow GS1201 is a yellow pigment that has high color strength and good liquidity. This pigment has strong physical properties with a density of 1.5 g/cm3, an oil absorption between 40-50 ml/100g, and a pH value of 6.0-7.0. It is commonly used in solvent-based inks. 收起 | |
| Benzidine Yellow GS1301 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1301 is a diarylide yellow pigment that has high transparency, high color strength and good liquidity. This pigment has a chemical base of disazo and is commonly used in solvent-based inks. | |
| Benzidine Yellow GS1401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1401 is a yellow pigment that has high tinting strength with good liquidity. It has strong physical properties with an oil absorption rate between 35-45 ml/100g, a density of 1.6 g/cm3, and a pH value of 6.0-8.0. This pigment is semi-tr...展開 Benzidine Yellow GS1401 is a yellow pigment that has high tinting strength with good liquidity. It has strong physical properties with an oil absorption rate between 35-45 ml/100g, a density of 1.6 g/cm3, and a pH value of 6.0-8.0. This pigment is semi-transparent and is recommended to be used in solvent-based inks. 收起 | |
| Benzidine Yellow GS1402 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1402 is a yellow pigment that has high-transparency, high tinting strength, and great liquidity. This product is recommended for use in solvent-based inks as it has strong physical properties such as a pH Value of 6.0-8.0 and a density ...展開 Benzidine Yellow GS1402 is a yellow pigment that has high-transparency, high tinting strength, and great liquidity. This product is recommended for use in solvent-based inks as it has strong physical properties such as a pH Value of 6.0-8.0 and a density of 1.6 g/cm3. 收起 | |
| Benzidine Yellow GW1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1201 is a diarylide aniline yellow pigment that has a chemical nature of disazo. This product will provide high transparency and high tinting strength. It is recommended to be used in water-based inks and has strong physical properties ...展開 Benzidine Yellow GW1201 is a diarylide aniline yellow pigment that has a chemical nature of disazo. This product will provide high transparency and high tinting strength. It is recommended to be used in water-based inks and has strong physical properties with an oil absorption rate of 40-50 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW1301 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1301 is a diarylide yellow pigment that provides high tenting strength and high transparency. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to acid, alkali and alc...展開 Benzidine Yellow GW1301 is a diarylide yellow pigment that provides high tenting strength and high transparency. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to acid, alkali and alcohol and also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW1401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1401 is a diarylide yellow pigment that provides high transparency and high tinting strength. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to alcohol, acid, and a...展開 Benzidine Yellow GW1401 is a diarylide yellow pigment that provides high transparency and high tinting strength. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to alcohol, acid, and also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW7401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW7401 is a yellow pigment that is semi transparent, and is highly resistant to alcohol, acid, and benzene. This product is recommended to be used in water-based inks. It also has strong physical properties with an oil absorption rate of ...展開 Benzidine Yellow GW7401 is a yellow pigment that is semi transparent, and is highly resistant to alcohol, acid, and benzene. This product is recommended to be used in water-based inks. It also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Changtai Micro Powder Wax KM1104 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1104 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1104 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM1137 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1137 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1137 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM1204 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1204 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1204 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM1237 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM1237 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in wate...展開 Changtai Micro Powder Wax KM1237 is a micropowder wax in the form of a faint yellow powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in water-based coatings and inks. 收起 | |
| Changtai Micro Powder Wax KM2106 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2106 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2106 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2110 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2110 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2110 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2110F | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2110F is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-ba...展開 Changtai Micro Powder Wax KM2110F is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2117 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2117 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2117 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2206 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2206 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2206 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Changtai Micro Powder Wax KM2217 | Changsha Creature Industry Co., Ltd. | Changtai Micro Powder Wax KM2217 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-bas...展開 Changtai Micro Powder Wax KM2217 is a micropowder wax in the form of a white powder. This product can improve stain resistance, anti-adhesion, control the gloss of inks, increase slip, and improve the surface scratch and abrasion resistance in solvent-based paints and inks. 收起 | |
| Cyanine Blue GF15301 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GF15301 is a blue pigment that has a bright color and strong color strength. This pigment has low viscosity with good fluidity, and is recommended to be used in offset inks. | |
| Cyanine Blue GS15301 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GS15301 is a blue pigment that has strong color strength and low viscosity. This product has exceptional fastness properties with a heat resistance to temperatures up to 250°C and good migration and bleeding resistance. It is commonly used in...展開 Cyanine Blue GS15301 is a blue pigment that has strong color strength and low viscosity. This product has exceptional fastness properties with a heat resistance to temperatures up to 250°C and good migration and bleeding resistance. It is commonly used in solvent-based inks. 收起 | |
| Cyanine Blue GW15101 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GW15101 is a blue reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great liquidity, and it is recommended to be used in water-based inks. It has s...展開 Cyanine Blue GW15101 is a blue reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great liquidity, and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 35-45 ml/100g. 收起 | |
| Cyanine Green GF701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GF701 is a yellow or bluish shade pigment that has strong color strength with good fluidity. This pigment has excellent dispersability and a chemical nature of phthalocyanine. It is recommended to be used in offset inks and has a pH value of...展開 Cyanine Green GF701 is a yellow or bluish shade pigment that has strong color strength with good fluidity. This pigment has excellent dispersability and a chemical nature of phthalocyanine. It is recommended to be used in offset inks and has a pH value of 6.5-7.5 with an oil absorption rate of around 35-45 ml/100g. 收起 | |
| Cyanine Green GS701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GS701 is a green pigment that has strong color strength and good dispersibility. It has exceptional fastness properties with a heat resistance to temperatures up to 220°C and good migration and bleeding resistance. This product also provides...展開 Cyanine Green GS701 is a green pigment that has strong color strength and good dispersibility. It has exceptional fastness properties with a heat resistance to temperatures up to 220°C and good migration and bleeding resistance. This product also provides good physical properties with a density of 1.8 g/cm3 and a pH Value of 6.5-7.5. It is commonly used in solvent-based inks. 收起 | |
| Cyanine Green GW701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GW701 is a green reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great dispersibility, high color strength, and it is recommended to be used in ...展開 Cyanine Green GW701 is a green reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great dispersibility, high color strength, and it is recommended to be used in water-based inks. 收起 | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| DPP Red GW25401 | Hangzhou Geecolor Chemical Co., Ltd | DPP Red GW25401 is a red, high performance pigment that has a medium opacity and is recommended for use in water-based inks. This pigment has outstanding fastness properties with exceptional resistance to ester, benzene, ketone, alcohol, alkali and acid. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fast Orange GW1301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Orange GW1301 is an orange pigment that has a reddish shade and is semi-transparent. This pigment has a chemical nature of disazo and has good fastness to light and water. It is recommended for use in water-based inks and it has an oil absorption rat...展開 Fast Orange GW1301 is an orange pigment that has a reddish shade and is semi-transparent. This pigment has a chemical nature of disazo and has good fastness to light and water. It is recommended for use in water-based inks and it has an oil absorption rate of 30-40 ml/100g and a pH Value of 6.5-7.5. 收起 | |
| Fast Violet GS2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat re...展開 Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| Fast Violet GS2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone...展開 Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone and a heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| Fast Violet GW2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GW2301 is a high performance bluish violet pigment that has high color strength and it is recommended to be used in water-based inks. This pigment has excellent fastness properties with a heat resistance to temperatures up to 250°C. It also ha...展開 Fast Violet GW2301 is a high performance bluish violet pigment that has high color strength and it is recommended to be used in water-based inks. This pigment has excellent fastness properties with a heat resistance to temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and a pH Value of 6.0-7.0. 收起 | |
| Fast Violet GW2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GW2302 is a high performance reddish violet pigment that has high color strength and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and a pH value of 6.0-7.0. This pigment also h...展開 Fast Violet GW2302 is a high performance reddish violet pigment that has high color strength and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and a pH value of 6.0-7.0. This pigment also has excellent fastness properties with a heat resistance to temperatures up to 250°C. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| KR-120 | Changsha Creature Industry Co., Ltd. | KR-120 is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-120A | Changsha Creature Industry Co., Ltd. | KR-120A is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-120B | Changsha Creature Industry Co., Ltd. | KR-120B is a polyketone resin that is in the form of light white grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-120W | Changsha Creature Industry Co., Ltd. | KR-120W is a polyketone resin that is in the form of light yellow grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-130 | Changsha Creature Industry Co., Ltd. | KR-130 is a polyketone resin that is in the form of light yellow grains or a block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-80F | Changsha Creature Industry Co., Ltd. | KR-80F is a polyketone resin that is in the form of a light yellow block solid. This product can provide high gloss, hardness, anti-degradation, weather resistance, and heat resistance in paints, coatings, adhesives, and inks. | |
| KR-A101 | Changsha Creature Industry Co., Ltd. | KR-A101 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, mo...展開 KR-A101 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, modified resins, and other systems as a special hard resin. 收起 | |
| KR-A81 | Changsha Creature Industry Co., Ltd. | KR-A81 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, mod...展開 KR-A81 is a polyacetal resin that is in the form of a colorless, transparent to light yellow semi-circle fine small grains. This product can be used in solvent-based coatings and inks, solvent-free coatings, UV light curable coatings, powder coatings, modified resins, and other systems as a special hard resin. 收起 | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Lithol Rubine GF57101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GF57101 is a red pigment that has a yellowish shade with high tinting strength. This product is recommended for use with offset inks, and can provide exceptional gloss and transparency. | |
| Lithol Rubine GF57102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GF57102 is an interphase red pigment with high tinting strength. It can provide excellent transparency and gloss, and also has excellent flow properties and strong storage stability. This product has a pH value between 7.0-8.0 and an oil abs...展開 Lithol Rubine GF57102 is an interphase red pigment with high tinting strength. It can provide excellent transparency and gloss, and also has excellent flow properties and strong storage stability. This product has a pH value between 7.0-8.0 and an oil absorption rate of around 45-55 ml/100g, and it is recommended for use in offset inks. 收起 | |
| Lithol Rubine GF57103 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GF57103 is a red pigment that has a bluish shade, and has exceptional flow with good storage stability. This pigment is recommended to be used in offset inks and it can provide high tinting strength along with high gloss, and good transparen...展開 Lithol Rubine GF57103 is a red pigment that has a bluish shade, and has exceptional flow with good storage stability. This pigment is recommended to be used in offset inks and it can provide high tinting strength along with high gloss, and good transparency. 收起 | |
| Lithol Rubine GS57101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GS57101 is a red pigment that has high luster, low viscosity and good resistance to solvents. This product has good fastness qualities such as resistance to alcohol, alkali, benzene, ester, ketone and acid. It is commonly used in solvent-bas...展開 Lithol Rubine GS57101 is a red pigment that has high luster, low viscosity and good resistance to solvents. This product has good fastness qualities such as resistance to alcohol, alkali, benzene, ester, ketone and acid. It is commonly used in solvent-based inks. 收起 | |
| Lithol Rubine GS57102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GS57102 is a yellowish red pigment that provides high luster, low viscosity, and it is designed to be used in solvent-based inks. This product has good fastness properties as it has resistance to alkali, acid, ester, ketone, benzene and alco...展開 Lithol Rubine GS57102 is a yellowish red pigment that provides high luster, low viscosity, and it is designed to be used in solvent-based inks. This product has good fastness properties as it has resistance to alkali, acid, ester, ketone, benzene and alcohol. 收起 | |
| Lithol Rubine GW57101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GW57101 is a red pigment that has a bluish shade and provides high gloss, high tinting strength, and good transparency. This product has an exceptional flow with good storage stability and it is recommended to be used in water-based inks. It...展開 Lithol Rubine GW57101 is a red pigment that has a bluish shade and provides high gloss, high tinting strength, and good transparency. This product has an exceptional flow with good storage stability and it is recommended to be used in water-based inks. It has strong physical properties with an oil absorption rate of 45-55 ml/100g and a density of 1.8 g/cm3. 收起 | |
| Lithol Rubine GW57102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GW57102 is a yellowish shade scarlet pigment that provides high gloss, high tinting strength, and good transparency. This product has exceptional flow with good storage stability and it is recommended to be used in water-based inks. It has s...展開 Lithol Rubine GW57102 is a yellowish shade scarlet pigment that provides high gloss, high tinting strength, and good transparency. This product has exceptional flow with good storage stability and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.8 g/cm3 and an oil absorption rate of 45-55 ml/100g. 收起 | |
| Lithol Scarlet Red GW49101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Scarlet Red GW49101 is a red pigment that has strong color strength and excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has g...展開 Lithol Scarlet Red GW49101 is a red pigment that has strong color strength and excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has good fastness properties with a strong resistance to alkali, acid, ester, benzene, ketone and alcohol. 收起 | |
| Lithol Scarlet Red GW49102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Scarlet Red GW49102 is a red pigment that has excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has good fastness properties wi...展開 Lithol Scarlet Red GW49102 is a red pigment that has excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has good fastness properties with a strong resistance to alkali, acid, ester, benzene, ketone and alcohol. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展開 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展開 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展開 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展開 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展開 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 |
