| 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) | Beijing RBL Chemicals Co., Ltd. | 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Benzidine Yellow DHG | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow DHG is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be use...展開 Benzidine Yellow DHG is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in textile printing. 收起 | |
| Benzidine Yellow G | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G is an organic pigment with a reddish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ...展開 Benzidine Yellow G is an organic pigment with a reddish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ink, although it can also be used in textile printing and water-based ink. 收起 | |
| Benzidine Yellow G-A | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G-A is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be us...展開 Benzidine Yellow G-A is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in textile printing, plastic, and water-based ink. 收起 | |
| Benzidine Yellow G-B | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G-B is an organic pigment with a greenish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offs...展開 Benzidine Yellow G-B is an organic pigment with a greenish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ink, although it can also be used in textile printing and water-based ink. 收起 | |
| Benzidine Yellow H121 | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow H121 is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in NC and PA ink, although it can also ...展開 Benzidine Yellow H121 is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in NC and PA ink, although it can also be used in toluene base ink and PP ink. 收起 | |
| Bronze Red C | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in p...展開 Bronze Red C is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in plastic and water-based ink. 收起 | |
| Bronze Red C-P | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-P is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 230°C. Its main application is in plastic, although it can also be used in of...展開 Bronze Red C-P is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 230°C. Its main application is in plastic, although it can also be used in offset ink. 收起 | |
| Bronze Red C-S | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-S is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP,...展開 Bronze Red C-S is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP, PA, and offset ink. 收起 | |
| Bronze Red C-W | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be us...展開 Bronze Red C-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in offset ink. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Deep Chrome Yellow 124 | Brill International Trade (Tianjin) Co., Ltd. | Deep Chrome Yellow 124 is an inorganic pigment used in inks and paints. It has oil absorption of 20 g/100g or less, a water soluble matter of 1% or less, and a PH of 4 to 8. | |
| Deep Chrome Yellow 124GQ | Brill International Trade (Tianjin) Co., Ltd. | Deep Chrome Yellow 124GQ is an inorganic pigment used in inks and paints. It has oil absorption of 20 g/100g or less, a water soluble matter of 1% or less, and a PH of 4 to 8. | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fast Blue B | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue B is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used ...展開 Fast Blue B is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, plastic, water-based ink, and industrial paint. 收起 | |
| Fast Blue BGNCF | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue BGNCF is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be u...展開 Fast Blue BGNCF is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Blue BGS | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue BGS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be use...展開 Fast Blue BGS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576.07, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Blue BS | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue BS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576 to 610, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be ...展開 Fast Blue BS is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 576 to 610, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Blue Lake BO | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue Lake BO is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 140°C. Its main applications are in offset ink and water-based ink. | |
| Fast Blue Toner | Brill International Trade (Tianjin) Co., Ltd. | Fast Blue Toner is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.5, and a heat resistance of 140°C. Its main applications are in offset ink and water-based ink. | |
| Fast Green G | Brill International Trade (Tianjin) Co., Ltd. | Fast Green G is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 1029 to 1127, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also b...展開 Fast Green G is an organic pigment with a reddish blue shade. It has the chemical family of Phthalocyanine, a molecular weight of 1029 to 1127, a density of 1.8, and a heat resistance of 200°C. Its main application is in offset ink, although it can also be used in textile printing, water-based ink, and industrial paint. 收起 | |
| Fast Orange G | Brill International Trade (Tianjin) Co., Ltd. | Fast Orange G is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 623.48, a density of 1.6, and a heat resistance of 160°C. Its main applications are in textile printing and water-based ink, altho...展開 Fast Orange G is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 623.48, a density of 1.6, and a heat resistance of 160°C. Its main applications are in textile printing and water-based ink, although it can also be used in plastic, NC ink, and offset ink. 收起 | |
| Fast Orange RL | Brill International Trade (Tianjin) Co., Ltd. | Fast Orange RL is an organic pigment with a reddish yellow shade. It has the chemical family of Azo, a molecular weight of 651.60, a density of 1.6, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used i...展開 Fast Orange RL is an organic pigment with a reddish yellow shade. It has the chemical family of Azo, a molecular weight of 651.60, a density of 1.6, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in plastic and textile printing. 收起 | |
| Fast Pink Lake | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Lake is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.6, and a heat resistance of 100°C or 120°C. Its main applications are in NC ink and offset ink, although it can also be used in PA ink. | |
| Fast Pink Toner | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Toner is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.5, and a heat resistance of 120°C. Its main application is in offset ink. | |
| Fast Pink Toner NC | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Toner NC is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.5, and a heat resistance of 120°C. Its main application is in NC ink, although it can also be used in PP and PA ink. | |
| Fast Pink Toner W | Brill International Trade (Tianjin) Co., Ltd. | Fast Pink Toner W is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.5, and a heat resistance of 120°C. Its main application is in water-based ink. | |
| Fast Red 2R | Brill International Trade (Tianjin) Co., Ltd. | Toluidine Maroon is an organic pigment with a blueish red shade. It has the chemical family of Mono Azo, a molecular weight of 440.45, a density of 1.5, and a heat resistance of 140°C. Its main application is in industrial paint. | |
| Fast Red BBC-S | Brill International Trade (Tianjin) Co., Ltd. | Fast Red BBC-S is an organic pigment with a blueish red shade. It has the chemical family of Mono Azo, a molecular weight of 458.90, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP an...展開 Fast Red BBC-S is an organic pigment with a blueish red shade. It has the chemical family of Mono Azo, a molecular weight of 458.90, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP and PA ink. 收起 | |
| Fast Red BBN | Brill International Trade (Tianjin) Co., Ltd. | Fast Red BBN is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 556.16, a density of 1.8, and a heat resistance of 180°C. Its main application is in plastic and offset ink. | |
| Fast Red BBN-W | Brill International Trade (Tianjin) Co., Ltd. | Fast Red BBN-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 556.16, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be us...展開 Fast Red BBN-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 556.16, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in offset ink. 收起 | |
| Fast Red BBS-W | Brill International Trade (Tianjin) Co., Ltd. | Fast Red BBS-W is an organic pigment with a red shade. It has the chemical family of Mono Azo, a molecular weight of 506.44, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in offs...展開 Fast Red BBS-W is an organic pigment with a red shade. It has the chemical family of Mono Azo, a molecular weight of 506.44, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in offset ink. 收起 | |
| Fast Red F2R | Brill International Trade (Tianjin) Co., Ltd. | Fast Red F2R is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 436.29, a density of 1.5, and a heat resistance of 120°C. Its main applications are in textile printing and water-based ink. | |
| Fast Red F3RK | Brill International Trade (Tianjin) Co., Ltd. | Fast Red F3RK is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 454.48, a density of 1.5, and a heat resistance of 180°C. Its main applications are in automotive and industrial paint, although it ...展開 Fast Red F3RK is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 454.48, a density of 1.5, and a heat resistance of 180°C. Its main applications are in automotive and industrial paint, although it can also be used in plastic and water-based coating. 收起 | |
| Fast Red F4R | Brill International Trade (Tianjin) Co., Ltd. | Fast Red F4R is an organic pigment with a blueish red shade. It has the chemical family of Mono Azo, a molecular weight of 436.29, a density of 1.5, and a heat resistance of 120°C. Its main application is in textile printing, although it can also be used ...展開 Fast Red F4R is an organic pigment with a blueish red shade. It has the chemical family of Mono Azo, a molecular weight of 436.29, a density of 1.5, and a heat resistance of 120°C. Its main application is in textile printing, although it can also be used in water-based ink. 收起 | |
| Fast Red F5RK | Brill International Trade (Tianjin) Co., Ltd. | Fast Red F5RK is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 454.48, a density of 1.5, and a heat resistance of 180°C. Its main applications are in automotive and industrial paint, although it ...展開 Fast Red F5RK is an organic pigment with a bluish red shade. It has the chemical family of Mono Azo, a molecular weight of 454.48, a density of 1.5, and a heat resistance of 180°C. Its main applications are in automotive and industrial paint, although it can also be used in plastic and water-based coating. 收起 | |
| Fast Red FBB | Brill International Trade (Tianjin) Co., Ltd. | Fast Red FBB is an organic pigment with a bright red shade. It has the chemical family of Mono Azo, a molecular weight of 611.04, a density of 1.6, and a heat resistance of 160°C. Its main application is in textile printing, although it can also be used i...展開 Fast Red FBB is an organic pigment with a bright red shade. It has the chemical family of Mono Azo, a molecular weight of 611.04, a density of 1.6, and a heat resistance of 160°C. Its main application is in textile printing, although it can also be used in plastic, water-based ink, and offset ink. 收起 | |
| Fast Red FGR | Brill International Trade (Tianjin) Co., Ltd. | Fast Red FGR is an organic pigment with a bright red shade. It has the chemical family of Mono Azo, a molecular weight of 485.76, a density of 1.5, and a heat resistance of 170°C. Its main applications are in textile printing and water-based ink, although...展開 Fast Red FGR is an organic pigment with a bright red shade. It has the chemical family of Mono Azo, a molecular weight of 485.76, a density of 1.5, and a heat resistance of 170°C. Its main applications are in textile printing and water-based ink, although it can also be used in air drying paint and industrial paint. 收起 | |
| Fast Red N | Brill International Trade (Tianjin) Co., Ltd. | Fast Red N is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 426.42, a density of 1.5, and a heat resistance of 120°C. Its main applications are in textile printing and water-based ink. | |
| Fast Red W | Brill International Trade (Tianjin) Co., Ltd. | Fast Red W is an organic pigment with a bluish red shade. It has the chemical family of Xanthene, a density of 1.6, and a heat resistance of 120°C. Its main application is in water-based ink, although it can also be used in offset ink. | |
| Fast Rose Lake | Brill International Trade (Tianjin) Co., Ltd. | Fast Rose Lake is an organic pigment with a reddish violet shade. It has the chemical family of Rhodamine, a density of 1.8, and a heat resistance of 120°C. Its main application is in offset ink, although it can also be used in PA and water-based ink. | |
| Fast Rose Toner | Brill International Trade (Tianjin) Co., Ltd. | Fast Rose Toner is an organic pigment with a reddish violet shade. It has the chemical family of Rhodamine, a density of 1.8, and a heat resistance of 120°C. Its main application is in offset ink. | |
| Fast Violet Lake | Brill International Trade (Tianjin) Co., Ltd. | Fast Violet Lake is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 120°C. Its main application is in offset ink. | |
| Fast Violet RL | Brill International Trade (Tianjin) Co., Ltd. | Fast Violet RL is an organic pigment with a bluish violet shade. It has the chemical family of Dioxazine, a density of 1.6, and a heat resistance of 250°C. Its main applications are in industrial paint, textile printing, and water-based ink, although it c...展開 Fast Violet RL is an organic pigment with a bluish violet shade. It has the chemical family of Dioxazine, a density of 1.6, and a heat resistance of 250°C. Its main applications are in industrial paint, textile printing, and water-based ink, although it can also be used in automotive paint and water-based coating. 收起 | |
| Fast Violet Toner | Brill International Trade (Tianjin) Co., Ltd. | Fast Violet Toner is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 120°C. Its main application is in offset ink, although it can also be used in water-based ink. | |
| Fast Violet Toner NC | Brill International Trade (Tianjin) Co., Ltd. | Fast Violet Toner NC is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 120°C. Its main application is in NC ink, although it can also be used in PP and PA ink. | |
| Fast Violet Toner W | Brill International Trade (Tianjin) Co., Ltd. | Fast Violet Toner W is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 120°C. Its main application is in offset water-based ink, although it can also be used in offs...展開 Fast Violet Toner W is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 120°C. Its main application is in offset water-based ink, although it can also be used in offset ink. 收起 | |
| Fast Violet W | Brill International Trade (Tianjin) Co., Ltd. | Fast Violet W is an organic pigment with a bluish violet shade. It has the chemical family of Triphenylmethane, a density of 1.6, and a heat resistance of 120°C. Its main application is in water-based ink, although it can also be used in offset ink. | |
| Fast Yellow 10G | Brill International Trade (Tianjin) Co., Ltd. | Fast Yellow 10G is an organic pigment with a greenish yellow shade. It has the chemical family of Mono Azo, a molecular weight of 395.20, a density of 1.6, and a heat resistance of 160°C. Its main applications are in offset ink and air drying paint, altho...展開 Fast Yellow 10G is an organic pigment with a greenish yellow shade. It has the chemical family of Mono Azo, a molecular weight of 395.20, a density of 1.6, and a heat resistance of 160°C. Its main applications are in offset ink and air drying paint, although it can also be used in water-based coating and industrial paint. 收起 | |
| Fast Yellow G | Brill International Trade (Tianjin) Co., Ltd. | Fast Yellow G is an organic pigment with a bright yellow shade. It has the chemical family of Mono Azo, a molecular weight of 340.33, a density of 1.6, and a heat resistance of 160°C. Its main applications are in offset ink and air drying paint, although ...展開 Fast Yellow G is an organic pigment with a bright yellow shade. It has the chemical family of Mono Azo, a molecular weight of 340.33, a density of 1.6, and a heat resistance of 160°C. Its main applications are in offset ink and air drying paint, although it can also be used in water-based coating and industrial paint. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| GarLAS 16/50 | Ganga Rasayanie (Pvt) Ltd | GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 1924 | Ganga Rasayanie (Pvt) Ltd | GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035 | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035C | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 20/40 | Ganga Rasayanie (Pvt) Ltd | GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GaroMAX™ 21/60 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, m...展開 GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 21/60A | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, ...展開 GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 4546 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, me...展開 GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, meta...展開 GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46B | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, met...展開 GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroSOL™ 100 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 110 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 155 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 160 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 180 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 |
