| 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) | Beijing RBL Chemicals Co., Ltd. | 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Black Manganese NB-2 | Changzhou Huazhu Pigment Co., Ltd. | Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and cerami...展開 Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Cobalt Blue PB28 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展開 Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Cobalt Blue PB36 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展開 Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Copper Chrome Black NB-1 | Changzhou Huazhu Pigment Co., Ltd. | Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ce...展開 Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Crystal Blue HE-765 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展開 Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-745 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展開 Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-785 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展開 Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-741 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展開 Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-781 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展開 Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-746 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展開 Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-766 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展開 Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-786 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展開 Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-743 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展開 Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-763 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展開 Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-783 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展開 Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-740 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展開 Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-780 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展開 Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HE-764 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展開 Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-744 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展開 Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-784 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展開 Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| DA-1 | Changzhou Huazhu Pigment Co., Ltd. | DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing i...展開 DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| DM-1 | Changzhou Huazhu Pigment Co., Ltd. | DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展開 DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DM-2 | Changzhou Huazhu Pigment Co., Ltd. | DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展開 DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| GarLAS 16/50 | Ganga Rasayanie (Pvt) Ltd | GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 1924 | Ganga Rasayanie (Pvt) Ltd | GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035 | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035C | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 20/40 | Ganga Rasayanie (Pvt) Ltd | GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GaroMAX™ 21/60 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, m...展開 GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 21/60A | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, ...展開 GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 4546 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, me...展開 GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, meta...展開 GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46B | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, met...展開 GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroSOL™ 100 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 110 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 155 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 160 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 180 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 300 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| Golden H-231 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coating...展開 Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-232 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and...展開 Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-233 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings a...展開 Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-234 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展開 Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-236 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings ...展開 Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-250 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展開 Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-251 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-251 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatin...展開 Golden H-251 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-252 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-252 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展開 Golden H-252 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-270 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-270 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展開 Golden H-270 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-271 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-271 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatin...展開 Golden H-271 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-272 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-272 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展開 Golden H-272 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| GrintoSOL™ 1924 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and min...展開 GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2427 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and min...展開 GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2428 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and min...展開 GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2535 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and min...展開 GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2629 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and min...展開 GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2633 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2633 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 320, and is often used in ink oils and min...展開 GrintoSOL™ 2633 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 320, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. |
