| 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) | Beijing RBL Chemicals Co., Ltd. | 2-(2-Ethoxyethoxy) Ethylacrylate (EOEOEA) is an acrylate monomer. This product appears as a clear liquid and has good flexibility and dilution properties. It can be used in UV-coatings for metal, wood, and in ink applications. | |
| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展開 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展開 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...展開 Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ATR-312 | Zhejiang Chembest United Industrial Co., Ltd. | ATR-312 is a rutile titanium dioxide pigment. This product appears as a white powder that has been treated with aluminum and silicon compounds. It can be used in paints, coatings, printing inks, decorative materials, plastics, and in rubber applications...展開 ATR-312 is a rutile titanium dioxide pigment. This product appears as a white powder that has been treated with aluminum and silicon compounds. It can be used in paints, coatings, printing inks, decorative materials, plastics, and in rubber applications. 收起 | |
| Benzidine Yellow 121H | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow 121H, in the form of a bright yellow powder, is a dye that can be used in polyamide inks, nitrocellulose inks, polypropylene inks, and in toluene-based inks. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Benzidine Yellow DHG | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow DHG, in the form of a bright yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Benzidine Yellow G | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow G, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value...展開 Benzidine Yellow G, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. 收起 | |
| Benzidine Yellow G-A | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow G-A, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing and in plastic applications. Its density is 1.5 and its pH value exists betw...展開 Benzidine Yellow G-A, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. 收起 | |
| Benzidine Yellow G-B | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow G-B, in the form of a semi-transparent greenish yellow powder, is a dye in the diazo chemical family. This product can be sued in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its p...展開 Benzidine Yellow G-B, in the form of a semi-transparent greenish yellow powder, is a dye in the diazo chemical family. This product can be sued in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. 收起 | |
| Bronze Red C | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water based inks, offset inks, and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Bronze Red C-P | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C-P, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in offset ink applications and in plastic. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Bronze Red C-S | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C-S, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, offset inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exi...展開 Bronze Red C-S, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, offset inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Bronze Red C-W | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C-W, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展開 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Chrome Titanate Brown | Zhejiang Chembest United Industrial Co., Ltd. | Chrome Titanate Brown, in the form of a yellowish brown powder, is an inorganic dye. This product is non-toxic, weather-resistant, and acid-resistant. It can be used in heat-reflective coatings and inks. | |
| Copper Chromite Black | Zhejiang Chembest United Industrial Co., Ltd. | Copper Chromite Black, in the form of a bluish-black powder, is an inorganic dye. This product is heat-resistant, alkali-resistant, and acid resistant. It can be used in heat-resistant coatings, coil coatings, and high-temperature glass inks. | |
| Deep Chrome Yellow 805 | Zhejiang Chembest United Industrial Co., Ltd. | Deep Chrome Yellow 805, in the form of a yellow powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset ink applications. Its pH value exists between 4.0 and 8.0. | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fast Blue B | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue B, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and it...展開 Fast Blue B, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue BGNCF | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue BGNCF, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 an...展開 Fast Blue BGNCF, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue BGS | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue BGS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and in plastic applications. Its density is 1.8 a...展開 Fast Blue BGS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue BS | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue BS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, plastics, and in textile printing applications. Its density is 1.8 a...展開 Fast Blue BS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, plastics, and in textile printing applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue Lake BO | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue Lake BO, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Blue Toner | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue Toner, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.5 and its pH value exists between 7.0 and 8.0. | |
| Fast Green G | Zhejiang Chembest United Industrial Co., Ltd. | Fast Green G, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing applications, and in plastics. Its density is 1.8 a...展開 Fast Green G, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing applications, and in plastics. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Orange G | Zhejiang Chembest United Industrial Co., Ltd. | Fast Orange G, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in water-based inks, textile printing, offset inks, nitrocellulose inks, and in plastics. | |
| Fast Orange RL | Zhejiang Chembest United Industrial Co., Ltd. | Fast Orange RL, in the form of a reddish yellow powder, is a dye in the azo chemical family. This product can be used in water-based inks, textile printing, and in plastic applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0. | |
| Fast Pink Lake | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Lake, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in offset ink applications. Its density is 1.6 and its pH value exists between 6.5 and 7.5. | |
| Fast Pink Toner | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Toner, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in offset ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Pink Toner NC | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Toner NC, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.5 and its pH value exists between 6.5...展開 Fast Pink Toner NC, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. 收起 | |
| Fast Pink Toner W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Toner W, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in water-based ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Red 2R | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red 2R, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in industrial paint applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Fast Red BBC | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBC, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBC-S | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBC-S, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and...展開 Fast Red BBC-S, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Red BBM | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBM, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paint applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBN | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBN, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBN-W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBN-W, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBS-W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBS-W, in the form of a red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red F2R | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red F2R, in the appearance of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Red F4R | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red F4R, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Red FBB | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red FBB, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in offset inks, water-based inks, plastic applications, and in textile printing. Its density is 1.6 and its pH value exists between 6.0 ...展開 Fast Red FBB, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in offset inks, water-based inks, plastic applications, and in textile printing. Its density is 1.6 and its pH value exists between 6.0 and 7.0. 收起 | |
| Fast Red FGR | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red FGR, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks, textile printing, industrial paints, and air-drying paint applications. Its density is 1.5 and is pH value exists b...展開 Fast Red FGR, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks, textile printing, industrial paints, and air-drying paint applications. Its density is 1.5 and is pH value exists between 6.0 and 7.0. 收起 | |
| Fast Red N | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red N, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Fast Red W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red W, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Rose Lake | Zhejiang Chembest United Industrial Co., Ltd. | Fast Rose Lake, in the form of a reddish violet powder, is a dye in the rhodamine chemical family. This product can be used in offset inks, water-based inks, and polyamide inks. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Rose Toner | Zhejiang Chembest United Industrial Co., Ltd. | Fast Rose Toner, in the form of a reddish violet powder, is a dye in the rhodamine chemical family. This product can be used in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Violet Lake | Zhejiang Chembest United Industrial Co., Ltd. | Fast Violet Lake, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Violet RL | Zhejiang Chembest United Industrial Co., Ltd. | Fast Violet RL, in the form of a bluish violet powder, is a dye in the dioxazine chemical family. This product can be used in water-based inks, industrial paints, water-based coatings, automotive paints, textile printing applications, and in plastics. I...展開 Fast Violet RL, in the form of a bluish violet powder, is a dye in the dioxazine chemical family. This product can be used in water-based inks, industrial paints, water-based coatings, automotive paints, textile printing applications, and in plastics. Its density is 1.6 and its pH value exists between 5.0 and 6.0. 收起 | |
| Fast Violet Toner | Zhejiang Chembest United Industrial Co., Ltd. | Fast Violet Toner, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Violet Toner NC | Zhejiang Chembest United Industrial Co., Ltd. | Fast Violet Toner NC, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in nitrocellulose inks, polyamide inks, and in polypropylene ink applications. Its density is 1.6 and its pH value ex...展開 Fast Violet Toner NC, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in nitrocellulose inks, polyamide inks, and in polypropylene ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Violet Toner W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Violet Toner W, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Violet W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Violet W, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Yellow 10G | Zhejiang Chembest United Industrial Co., Ltd. | Fast Yellow 10G, in the form of a greenish yellow powder, is a dye in the mono azo chemical family. This product can be used in air drying paints, offset inks, industrial paints, and water-based coating applications. Its density is 1.6 and its pH value ...展開 Fast Yellow 10G, in the form of a greenish yellow powder, is a dye in the mono azo chemical family. This product can be used in air drying paints, offset inks, industrial paints, and water-based coating applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0. 收起 | |
| Fast Yellow G | Zhejiang Chembest United Industrial Co., Ltd. | Fast Yellow G, in the form of a bright yellow powder, is a dye in the mono azo chemical family. This product can be used in air drying paints, offset inks, industrial paints, and in water-based coating applications. Its density is 1.6 and its pH value e...展開 Fast Yellow G, in the form of a bright yellow powder, is a dye in the mono azo chemical family. This product can be used in air drying paints, offset inks, industrial paints, and in water-based coating applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展開 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| H0201 | Long Kou Windstar Chemical Co., Ltd. | H0201 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0301 | Long Kou Windstar Chemical Co., Ltd. | H0301 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0601 | Long Kou Windstar Chemical Co., Ltd. | H0601 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0801 | Long Kou Windstar Chemical Co., Ltd. | H0801 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0806 | Long Kou Windstar Chemical Co., Ltd. | H0806 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0901 | Long Kou Windstar Chemical Co., Ltd. | H0901 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0902 | Long Kou Windstar Chemical Co., Ltd. | H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0903 | Long Kou Windstar Chemical Co., Ltd. | H0903 has heat resistance value of > 300 C and oil Absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0904 | Long Kou Windstar Chemical Co., Ltd. | H0904 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0905 | Long Kou Windstar Chemical Co., Ltd. | H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| H0906 | Long Kou Windstar Chemical Co., Ltd. | H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Hydroxypropyl Cellulose (HPC) | Zhejiang Chembest United Industrial Co., Ltd. | Hydroxypropyl Cellulose, in the form of a viscous fluid, is an organic additive. This product can be used in tablet coatings, inks, and varnishes. Its pH exists between 5.0 and 7.5. | |
| KH180 | Zhejiang Chembest United Industrial Co., Ltd. | KH180, in the form of a powder, is a hydroxyethyl cellulose non-ionic surfactant. This product is soluble in both hot and cold water. It can be used in water-based latex paints and ink chemicals. | |
| KH250 | Zhejiang Chembest United Industrial Co., Ltd. | KH250, in the form of a powder, is a hydroxyethyl cellulose non-ionic surfactant. This product is soluble in both hot and cold water. It can be used in water-based latex paints and ink chemicals. | |
| KH300 | Zhejiang Chembest United Industrial Co., Ltd. | KH300, in the form of a powder, is a hydroxyethyl cellulose non-ionic surfactant. This product is soluble in both hot and cold water. It can be used in water-based latex paints and ink chemicals. | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 |
